UltraNX 3.0|R2

SaltySD/plugins/FPSLocker/patches/010008801F228000/7CE7738C90E39908.yaml

@@ -0,0 +1,23 @@
+# Tales of Berseria Remastered `US` 1.0.5
+# BID: 7CE7738C90E39908
+# Known issue: Using barrier devices may not be triggering animation for any other FPS targets than 30, 50, 60, 100, 120.
+# Known issue: Opening gate may not happen if you use any other FPS than 30, 60 or 120. 
+# Solution: when animation doesn't want to progress, change FPS Target to 30, 60 or 120.
+
+ALL_FPS:
+  # Disable FPS Lock
+  ## REF: 08 69 69 b8 69 ea 41 b9 28 01 08 0b, second result
+  ## Look to which address points ldr w8,[x8, x9, LSL #0x0], this is the interval speed. Substract 4 from offset to get vsync interval and our offset we need to put.
+  -
+    type: write
+    address: [MAIN, 0x44D07ACC]
+    value_type: uint32
+    value: [0, 1]
+  # Speed Factor
+  ## REF: 00 01 3f d6 00 00 22 1e 28 11 91 52 08 91 a7 72
+  ## Find first LDR X8, [X23, #offset] below result. X23 + offset is our address
+  -
+    type: evaluate_write
+    address: [MAIN, 0x44A926C0, -4]
+    value_type: float
+    value: "60 / FPS_TARGET"

SaltySD/plugins/FPSLocker/patches/0100092021C80000/97EB11E9B56A96E5.yaml

@@ -0,0 +1,11 @@
+# Tomb Raider: Definitive Edition 1.0.4
+# BID: 97EB11E9B56A96E5
+
+ALL_FPS:
+  # Dynamic Resolution Frametime Target
+  # REF: Search for function that has 4A 1C 80 D2 2A 1C C0 F2, then search instruction with 0x42055555 in that function, it should be written to 2 addresses inside main. Ignore closer address.
+  -
+    type: evaluate_write
+    address: [MAIN, 0x1C396F8]
+    value_type: float
+    value: FRAMETIME_TARGET

SaltySD/plugins/FPSLocker/patches/010035F022078000/68EDAFD68C7BC1A1.yaml

@@ -0,0 +1,31 @@
+# DRAGON BALL: Sparking! ZERO 2.0.76
+# BID: 68EDAFD68C7BC1A1
+
+ALL_FPS:
+  # Disable bUseFixedFrameRate to unlock framerate
+  -
+    type: write
+    address: [MAIN, 0x9AEFA30, 0x9C4]
+    address_unsafe: true
+    value_type: uint32
+    # Default is 0x47, bUseFixedFrameRate |= 0x40 
+    # By writing 7 we are making sure that other flags are maintained: 
+    # bAllowMultiThreadedAnimationUpdate |= 4
+    # bOptimizeAnimBlueprintMemberVariableAccess |= 2
+    # bCanBlueprintsTickByDefault |= 1
+    value: 7
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0x9AF1060, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x92F9B68, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/01003BD00CAAE000/3A04994C1F53710A.yaml

@@ -0,0 +1,34 @@
+# Wolfenstein: Youngblood 1.6
+# BID: 3A04994C1F53710A
+
+ALL_FPS:
+  # rs_force460
+  -
+    type: write
+    address: [MAIN, 0x7994DF0]
+    value_type: int32
+    value: 1
+  # rs_raiseThreshold = 0.96 * (30/FPS)
+  -
+    type: evaluate_write
+    address: [MAIN, 0x7994F14]
+    value_type: float
+    value: "(30 / FPS_TARGET) * 0.96"
+  # rs_dropThreshold = 0.984 * (30/FPS)
+  -
+    type: evaluate_write
+    address: [MAIN, 0x7994E84]
+    value_type: float
+    value: "(30 / FPS_TARGET) * 0.984"
+  # com_adaptiveTickMaxHz
+  -
+    type: evaluate_write
+    address: [MAIN, 0x85F74E0]
+    value_type: int32
+    value: FPS_LOCK_TARGET
+  # com_adaptiveTickMaxHz
+  -
+    type: evaluate_write
+    address: [MAIN, 0x85F74E4]
+    value_type: float
+    value: FPS_LOCK_TARGET

SaltySD/plugins/FPSLocker/patches/01003FD01F22E000/7CE7738C90E39908.yaml

@@ -0,0 +1,23 @@
+# 테일즈 오브 베르세리아 리마스터 / 緋夜傳奇 Remastered 1.0.5
+# BID: 7CE7738C90E39908
+# Known issue: Using barrier devices may not be triggering animation for any other FPS targets than 30, 50, 60, 100, 120.
+# Known issue: Opening gate may not happen if you use any other FPS than 30, 60 or 120. 
+# Solution: when animation doesn't want to progress, change FPS Target to 30, 60 or 120.
+
+ALL_FPS:
+  # Disable FPS Lock
+  ## REF: 08 69 69 b8 69 ea 41 b9 28 01 08 0b, second result
+  ## Look to which address points ldr w8,[x8, x9, LSL #0x0], this is the interval speed. Substract 4 from offset to get vsync interval and our offset we need to put.
+  -
+    type: write
+    address: [MAIN, 0x44D07ACC]
+    value_type: uint32
+    value: [0, 1]
+  # Speed Factor
+  ## REF: 00 01 3f d6 00 00 22 1e 28 11 91 52 08 91 a7 72
+  ## Find first LDR X8, [X23, #offset] below result. X23 + offset is our address
+  -
+    type: evaluate_write
+    address: [MAIN, 0x44A926C0, -4]
+    value_type: float
+    value: "60 / FPS_TARGET"

SaltySD/plugins/FPSLocker/patches/01004FF021942000/671DBD7F2C80CFCE.yaml

@@ -0,0 +1,13 @@
+# EA SPORTS FC 26 1.88.131e
+# BID: 671DBD7F2C80CFCE
+
+ALL_FPS:
+  # Internal FPS Lock
+  -
+    type: evaluate_write
+    address: [MAIN, 0xC70C6B8, 8]
+    value_type: double
+    value: FPS_TARGET
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/01004FF021942000/E05F8F071E0EC7B3.yaml

@@ -0,0 +1,13 @@
+# EA SPORTS FC 26 1.87.2a1e
+# BID: E05F8F071E0EC7B3
+
+ALL_FPS:
+  # Internal FPS Lock
+  -
+    type: evaluate_write
+    address: [MAIN, 0xC6CB6B8, 8]
+    value_type: double
+    value: FPS_TARGET
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/01004FF021942000/E634977AFB55F3DC.yaml

@@ -0,0 +1,13 @@
+# EA SPORTS FC 26 1.88.adc9
+# BID: E634977AFB55F3DC
+
+ALL_FPS:
+  # Internal FPS Lock
+  -
+    type: evaluate_write
+    address: [MAIN, 0xC70C6B8, 8]
+    value_type: double
+    value: FPS_TARGET
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/0100544020572000/095A0687C2AEE4C3.yaml

@@ -0,0 +1,30 @@
+# Atelier Yumia: The Alchemist of Memories & the Envisioned Land 1.6.0
+# BID: 095A0687C2AEE4C3
+
+DECLARATIONS:
+  -
+    type: variable
+    name: dr_target
+    value_type: float
+    default_value: 0.035714287 # Basically = 1/28
+    evaluate: "1.01 / FPS_TARGET"
+MASTER_WRITE:
+  # Redirect DR
+  # REF: A9 24 89 52 49 A2 A7 72, second REF
+  -
+    type: asm_a64
+    main_offset: 0x10F7B74
+    instructions: [
+      [adrp, x9, $dr_target],
+      [ldr, s1, [x9, $dr_target]],
+      [nop]
+    ]
+ALL_FPS:
+  # Disable FPS Lock
+  # REF: 88 46 40 F9 03 11 40 F9, first ADRP+LDR above it
+  -
+    type: write
+    address: [MAIN, 0x2FEBCD0, 0xE0, 0x294]
+    address_unsafe: true
+    value_type: uint8
+    value: 0

SaltySD/plugins/FPSLocker/patches/010058600E530000/02A91F6F2440724D.yaml

@@ -0,0 +1,36 @@
+# Empire of Sin 1.11.0
+# BID: 02A91F6F2440724D
+
+DECLARATIONS:
+  -
+    type: variable
+    name: dr_target_min
+    value_type: double
+    default_value: 28.571428298950195
+    evaluate: "999.9996 / (FPS_TARGET + 5)"
+  -
+    type: variable
+    name: dr_target_max
+    value_type: double
+    default_value: 33.33333206176758
+    evaluate: "0.9999996 * FRAMETIME_TARGET"    
+MASTER_WRITE:
+  # REF: RomeroGames.DynamicResolutionService::UpdateService()
+  -
+    type: asm_a64
+    main_offset: 0x17D07CC
+    instructions: [
+      [nop],
+      [nop],
+      [adrp, x9, $dr_target_max],
+      [ldr, d0, [x9, $dr_target_max]]
+    ]
+  -
+    type: asm_a64
+    main_offset: 0x17D0990
+    instructions: [
+      [nop],
+      [nop],
+      [adrp, x8, $dr_target_min],
+      [ldr, d1, [x8, $dr_target_min]]
+    ]

SaltySD/plugins/FPSLocker/patches/0100690020FBE000/A91B42C3ACAF0082.yaml

@@ -0,0 +1,25 @@
+# Formula Legends 1.0.17
+# BID: A91B42C3ACAF0082
+
+ALL_FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: evaluate_write
+    address: [MAIN, 0x842DF68, 0]
+    value_type: float
+    value: ["TruncDec(FRAMETIME_TARGET, 2)", "TruncDec(FRAMETIME_TARGET, 2)"]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x7449EE8, 0]
+    value_type: int32
+    value: [0, 0]
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0x8456780, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/0100690020FBE000/B6568B04EEFB900C.yaml

@@ -0,0 +1,25 @@
+# Formula Legends 1.0.16
+# BID: B6568B04EEFB900C
+
+ALL_FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: evaluate_write
+    address: [MAIN, 0x841AF68, 0]
+    value_type: float
+    value: ["TruncDec(FRAMETIME_TARGET, 2)", "TruncDec(FRAMETIME_TARGET, 2)"]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x7436EE8, 0]
+    value_type: int32
+    value: [0, 0]
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0x8456780, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/0100853015E86000/031615168288CAAF.yaml

@@ -0,0 +1,21 @@
+# No Man's Sky 6.36.0
+# BID: 031615168288CAAF
+
+DECLARATIONS:
+  -
+    type: variable
+    name: dr_target
+    value_type: float
+    default_value: 30
+    evaluate: FPS_TARGET
+MASTER_WRITE:
+  # Redirect DR frametime target
+  # REF: 08 4E A8 52 00 01 27 1E 48 8F A8 52, ADRP + ADD + LDR above that
+  -
+    type: asm_a64
+    main_offset: 0x21832E0
+    instructions: [
+      [adrp, x9, $dr_target],
+      [ldr, s0, [x9, $dr_target]],
+      [nop]
+    ]

SaltySD/plugins/FPSLocker/patches/010090100E334000/071D033812A1DC7D.yaml

@@ -0,0 +1,12 @@
+# Don't Starve Together 1.28.0
+# BID: 071D033812A1DC7D
+
+ALL_FPS:
+  # FPS Lock
+  # REF: Find instruction 36 D9 34 F8, use X9 to find main offset
+  -
+    type: evaluate_write
+    address: [MAIN, 0x91F448, 0, 0x320]
+    address_unsafe: true
+    value_type: float
+    value: "1 / FPS_TARGET"

SaltySD/plugins/FPSLocker/patches/0100B36008F90000/414DA8EF40E5C20D.yaml

@@ -0,0 +1,28 @@
+# INAZUMA ELEVEN: Victory Road 6.0.0
+# BID: 414DA8EF40E5C20D
+
+DECLARATIONS:
+  -
+    type: variable
+    name: fps_target
+    value_type: float
+    default_value: 30
+    evaluate: FPS_TARGET
+MASTER_WRITE:
+  # Dynamic Resolution FPS Target
+  ## REF: 62 02 23 1E 21 18 22 1E, ucvtf + fdiv
+  -
+    type: asm_a64
+    main_offset: 0xCAAE2C
+    instructions: [
+      [adrp, x9, $fps_target],
+      [ldr, s1, [x9, $fps_target]]
+    ]
+ALL_FPS:
+  # Disable FPS Lock
+  ## REF: 20 01 00 A9 00 01 63 9E, second LDRB below that, IDA will show address after full analyze
+  -
+    type: write
+    address: [MAIN, 0x3B47DE7]
+    value_type: uint8
+    value: 0

SaltySD/plugins/FPSLocker/patches/0100B4D00E6B0000/3A04994C1F53710A.yaml

@@ -0,0 +1,34 @@
+# Wolfenstein®: Youngblood™ (Deutsche Version) 1.6
+# BID: 3A04994C1F53710A
+
+ALL_FPS:
+  # rs_force460
+  -
+    type: write
+    address: [MAIN, 0x7994DF0]
+    value_type: int32
+    value: 1
+  # rs_raiseThreshold = 0.96 * (30/FPS)
+  -
+    type: evaluate_write
+    address: [MAIN, 0x7994F14]
+    value_type: float
+    value: "(30 / FPS_TARGET) * 0.96"
+  # rs_dropThreshold = 0.984 * (30/FPS)
+  -
+    type: evaluate_write
+    address: [MAIN, 0x7994E84]
+    value_type: float
+    value: "(30 / FPS_TARGET) * 0.984"
+  # com_adaptiveTickMaxHz
+  -
+    type: evaluate_write
+    address: [MAIN, 0x85F74E0]
+    value_type: int32
+    value: FPS_LOCK_TARGET
+  # com_adaptiveTickMaxHz
+  -
+    type: evaluate_write
+    address: [MAIN, 0x85F74E4]
+    value_type: float
+    value: FPS_LOCK_TARGET

SaltySD/plugins/FPSLocker/patches/0100BEA0244FC000/77F8EE220A7157FF.yaml

@@ -0,0 +1,23 @@
+# Majogami 1.2.1
+# BID: 77F8EE220A7157FF
+# REF: nnMain
+
+ALL_FPS:
+  # Min delta
+  -
+    type: evaluate_write
+    address: [MAIN, 0x2CF6420, 0x50]
+    value_type: uint32
+    value: FPS_TARGET
+  # FPS Lock
+  -
+    type: evaluate_write
+    address: [MAIN, 0x2CF6420, 0x60]
+    value_type: uint32
+    value: "1 / FPS_TARGET"
+  # Disable fixed speed
+  -
+    type: write
+    address: [MAIN, 0x2CF6420, 0x5C]
+    value_type: uint8
+    value: 0

SaltySD/plugins/FPSLocker/patches/0100BED01E6EE000/7CEB989706B7E24C.yaml

@@ -0,0 +1,12 @@
+# Sworn 1.0.4
+# BID: 7CEB989706B7E24C
+
+ALL_FPS:
+ # Dynamic Resolution target
+ ## REF: DynamicResolution_TypeInfo
+  -
+    type: evaluate_write
+    address: [MAIN, 0x60FE118, 0xB8, 0]
+    address_unsafe: true
+    value_type: double
+    value: [FPS_TARGET, FRAMETIME_TARGET]

SaltySD/plugins/FPSLocker/patches/0100C2801F22C000/7CE7738C90E39908.yaml

@@ -0,0 +1,23 @@
+# Tales of Berseria Remastered 1.0.5
+# BID: 7CE7738C90E39908
+# Known issue: Using barrier devices may not be triggering animation for any other FPS targets than 30, 50, 60, 100, 120.
+# Known issue: Opening gate may not happen if you use any other FPS than 30, 60 or 120. 
+# Solution: when animation doesn't want to progress, change FPS Target to 30, 60 or 120.
+
+ALL_FPS:
+  # Disable FPS Lock
+  ## REF: 08 69 69 b8 69 ea 41 b9 28 01 08 0b, second result
+  ## Look to which address points ldr w8,[x8, x9, LSL #0x0], this is the interval speed. Substract 4 from offset to get vsync interval and our offset we need to put.
+  -
+    type: write
+    address: [MAIN, 0x44D07ACC]
+    value_type: uint32
+    value: [0, 1]
+  # Speed Factor
+  ## REF: 00 01 3f d6 00 00 22 1e 28 11 91 52 08 91 a7 72
+  ## Find first LDR X8, [X23, #offset] below result. X23 + offset is our address
+  -
+    type: evaluate_write
+    address: [MAIN, 0x44A926C0, -4]
+    value_type: float
+    value: "60 / FPS_TARGET"

SaltySD/plugins/FPSLocker/patches/0100CD6023C84000/4F426502A0CF85FD.yaml

@@ -0,0 +1,25 @@
+# Achilles: Survivor 1.0.1
+# BID: 4F426502A0CF85FD
+
+ALL_FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: evaluate_write
+    address: [MAIN, 0x8E491F8, 0]
+    value_type: float
+    value: ["TruncDec(FRAMETIME_TARGET, 2)", "TruncDec(FRAMETIME_TARGET, 2)"]
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0x8E8B490, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x7E7B2A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/0100D1F00EB72000/3A04994C1F53710A.yaml

@@ -0,0 +1,34 @@
+# Wolfenstein®: Youngblood™ JPN 1.6
+# BID: 3A04994C1F53710A
+
+ALL_FPS:
+  # rs_force460
+  -
+    type: write
+    address: [MAIN, 0x7994DF0]
+    value_type: int32
+    value: 1
+  # rs_raiseThreshold = 0.96 * (30/FPS)
+  -
+    type: evaluate_write
+    address: [MAIN, 0x7994F14]
+    value_type: float
+    value: "(30 / FPS_TARGET) * 0.96"
+  # rs_dropThreshold = 0.984 * (30/FPS)
+  -
+    type: evaluate_write
+    address: [MAIN, 0x7994E84]
+    value_type: float
+    value: "(30 / FPS_TARGET) * 0.984"
+  # com_adaptiveTickMaxHz
+  -
+    type: evaluate_write
+    address: [MAIN, 0x85F74E0]
+    value_type: int32
+    value: FPS_LOCK_TARGET
+  # com_adaptiveTickMaxHz
+  -
+    type: evaluate_write
+    address: [MAIN, 0x85F74E4]
+    value_type: float
+    value: FPS_LOCK_TARGET

SaltySD/plugins/FPSLocker/patches/0100E0D01F224000/7CE7738C90E39908.yaml

@@ -0,0 +1,23 @@
+# テイルズ オブ ベルセリア リマスター 1.0.5
+# BID: 7CE7738C90E39908
+# Known issue: Using barrier devices may not be triggering animation for any other FPS targets than 30, 50, 60, 100, 120.
+# Known issue: Opening gate may not happen if you use any other FPS than 30, 60 or 120. 
+# Solution: when animation doesn't want to progress, change FPS Target to 30, 60 or 120.
+
+ALL_FPS:
+  # Disable FPS Lock
+  ## REF: 08 69 69 b8 69 ea 41 b9 28 01 08 0b, second result
+  ## Look to which address points ldr w8,[x8, x9, LSL #0x0], this is the interval speed. Substract 4 from offset to get vsync interval and our offset we need to put.
+  -
+    type: write
+    address: [MAIN, 0x44D07ACC]
+    value_type: uint32
+    value: [0, 1]
+  # Speed Factor
+  ## REF: 00 01 3f d6 00 00 22 1e 28 11 91 52 08 91 a7 72
+  ## Find first LDR X8, [X23, #offset] below result. X23 + offset is our address
+  -
+    type: evaluate_write
+    address: [MAIN, 0x44A926C0, -4]
+    value_type: float
+    value: "60 / FPS_TARGET"

SaltySD/plugins/FPSLocker/patches/0100E63013E60000/5E899D7CCF6F6508.yaml

@@ -0,0 +1,25 @@
+# ASTRONEER 1.40.3.0
+# BID: 5E899D7CCF6F6508
+
+ALL_FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: evaluate_write
+    address: [MAIN, 0xAE65748, 0]
+    value_type: float
+    value: ["TruncDec(FRAMETIME_TARGET, 2)", "TruncDec(FRAMETIME_TARGET, 2)"]
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0xAE935D0, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0xA696720, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/0100EF401D9B2000/108EC6802526CAB6.yaml

@@ -0,0 +1,19 @@
+# HYKE:Northern Light(s) 1.1.0
+# BID: 108EC6802526CAB6
+
+ALL_FPS:
+ # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x8518958, 0]
+    value_type: int32
+    value: [0, 0]
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0x9510260, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  -
+    type: block
+    what: timing

SaltySD/plugins/FPSLocker/patches/0100EF401D9B2000/6CB2715BFEF11E2B.yaml

@@ -0,0 +1,19 @@
+# HYKE:Northern Light(s) 1.1.2
+# BID: 6CB2715BFEF11E2B
+
+ALL_FPS:
+ # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x8518958, 0]
+    value_type: int32
+    value: [0, 0]
+  # t.MaxFPS
+  -
+    type: evaluate_write
+    address: [MAIN, 0x9510260, 0]
+    value_type: float
+    value: [FPS_LOCK_TARGET, FPS_LOCK_TARGET]
+  -
+    type: block
+    what: timing

atmosphere/contents/420000000007E51A/toolbox.json

@@ -2,5 +2,5 @@
 	"name"  : "nx-ovlloader",
 	"tid"   : "420000000007E51A",
 	"requires_reboot": false,
-	"version": "2.0.1"
+	"version": "2.0.2"
 }

bootloader/hekate_ipl.ini

@@ -12,6 +12,7 @@ bootprotect=0
 [Atmosphere]
 pkg3=atmosphere/package3
 cal0blank=1
+secmon=atmosphere/exosphere.bin
 logopath=bootloader/res/bootscreen.bmp
 icon=bootloader/res/atmo_cfw.bmp
 

bootloader/ini/more_configs.ini

@@ -2,6 +2,7 @@
 pkg3=atmosphere/package3
 emummc_force_disable=1
 cal0blank=0
+secmon=atmosphere/exosphere.bin
 logopath=bootloader/res/bootscreen.bmp
 icon=bootloader/res/sys_cfw_nobox.bmp
 

config/UltraNX/40MB.ini

@@ -1,2 +1,5 @@
 [40MB]
 patch=Stock
+
+[Temp]
+patch=On

config/horizon-oc/config.ini

@@ -3,15 +3,14 @@ uncapped_clocks=1
 is_first_load=1
 dvfs_mode=1
 dvfs_offset=10
-cpu_gov_min_freq=1020000000
+auto_ram_cpu_cpu_oc_freq=1428000
+auto_ram_cpu_ram_oc_threshold=2600000
 
 [A111111111111111]
-handheld_cpu=1224
+handheld_cpu=1020
-handheld_gpu=614
+handheld_gpu=460
 handheld_mem=1600
-handheld_governor=514
+docked_cpu=1428
-docked_cpu=1785
 docked_gpu=921
 docked_mem=1600
-docked_governor=514
 

config/horizon-oc/lang/de.json

@@ -1,37 +1,33 @@
 {
     "Information": "Informationen",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Modul:",
-    "sys-dock status:": "Sys-Dock-Status:",
-    "SaltyNX status:": "SaltyNX-Status:",
-    "RR Display status:": "RR Anzeigestatus:",
-    "Wafer Position:": "Waferposition:",
-    "Credits": "Credits",
-    "Developers": "Entwickler",
-    "Contributors": "Mitwirkende",
-    "Testers": "Tester",
-    "Special Thanks": "Besonderer Dank",
     "Unknown": "Unbekannt",
     "Installed": "Installiert",
     "Not Installed": "Nicht installiert",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "DIE BIERWAREN-LIZENZ",
     "Default": "Standard",
     "Do Not Override": "Nicht überschreiben",
+    "Do not override": "Nicht überschreiben",
     "Disabled": "Deaktiviert",
     "Enabled": "Aktiviert",
-    " \\ue0e3 Reset": "\\ue0e3 Zurücksetzen",
+    "Enabled (Default)": "Aktiviert (Standard)",
-    "Display": "Anzeige",
+    "Enable": "Aktivieren",
-    "Application changed\\n\\n": "Anwendung geändert\\n\\n",
+    "Fatal error": "Fataler Fehler",
-    "The running application changed\\n\\n": "Die laufende Anwendung hat sich geändert\\n\\n",
-    "while editing was going on.": "während die Bearbeitung im Gange war.",
-    "Board": "Vorstand",
-    "%u.%u%u mV": "%u.%u%u mV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "Es konnte keine Verbindung zum hoc-clk-Systemmodul hergestellt werden.\\n\\n",
     "Please make sure everything is\\n\\n": "Bitte stellen Sie sicher, dass alles in Ordnung ist\\n\\n",
     "correctly installed and enabled.": "korrekt installiert und aktiviert.",
-    "Fatal error": "Fataler Fehler",
+
+    "Edit App Profile": "App-Profil bearbeiten",
+    "Edit Global Profile": "Globales Profil bearbeiten",
+    "Temporary Overrides": "Temporäre Überschreibungen",
     "Temporary Overrides ": "Temporäre Überschreibungen",
+    "  Reset": " Zurücksetzen",
+    "Settings": "Einstellungen",
+    "About": "Über",
+    "Credits": "Credits",
+
+    "Application changed\\n\\n": "Anwendung geändert\\n\\n",
+    "The running application changed\\n\\n": "Die laufende Anwendung hat sich geändert\\n\\n",
+    "while editing was going on.": "während die Bearbeitung im Gange war.",
+
     "Sleep Mode": "Schlafmodus",
     "Stock": "Lager",
     "Dev OC": "Entwickler OC",
@@ -40,57 +36,74 @@
     "Unsafe Max": "Unsicher max",
     "Absolute Max": "Absolutes Maximum",
     "Handheld Safe Max": "Handsafe max",
-    "Enable": "Aktivieren",
+
-    "Edit App Profile": "App-Profil bearbeiten",
-    "Edit Global Profile": "Globales Profil bearbeiten",
-    "Temporary Overrides": "Temporäre Überschreibungen",
-    "Settings": "Einstellungen",
-    "About": "Über",
-    "Compiling with minimal features": "Kompilieren mit minimalen Funktionen",
     "General Settings": "Allgemeine Einstellungen",
-    "Governor Settings": "Gouverneurseinstellungen",
+    "Governor Settings": "Regler-Einstellungen",
     "Safety Settings": "Sicherheitseinstellungen",
-    "Save KIP Settings": "Speichern Sie die KIP-Einstellungen",
+    "Save KIP Settings": "KIP-Einstellungen speichern",
     "RAM Settings": "RAM-Einstellungen",
     "CPU Settings": "CPU-Einstellungen",
     "GPU Settings": "GPU-Einstellungen",
     "Display Settings": "Anzeigeeinstellungen",
+    "Experimental Settings": "Experimentelle Einstellungen",
     "Experimental": "Experimentell",
+
+    " Settings marked in blue": "Blau markierte Einstellungen",
+    "don't require a reboot to apply!": "erfordern keinen Neustart zum Aktivieren!",
+    "You can also press  to show": "Drücken Sie auch  zum Anzeigen",
+    "information about each setting.": "von Informationen zu jeder Einstellung.",
+
+    " Experimental Settings are incomplete ": "Experimentelle Einstellungen unvollständig",
+    "and may not work correctly or at all!": "und funktionieren möglicherweise gar nicht!",
+    "Here be dragons!": "Hier gibt es Drachen!",
+
+    "RAM Voltage Display Mode": "RAM-Spannungsanzeigemodus",
+    "RAM Display Unit": "RAM-Anzeigeeinheit",
+    "Polling Interval": "Abfrageintervall",
+
     "GPU Scheduling Override Method": "GPU-Planungsüberschreibungsmethode",
+    "GPU Scheduling Override": "GPU-Planungsüberschreibung",
+    "GPU Boot Volt": "GPU Boot-Spannung",
+    "GPU Boot Voltage": "GPU Boot-Spannung",
+    "Memory Frequency Measurement Mode": "RAM-Frequenz-Messmodus",
+    " Overriding the charge current": "Überschreiben des Ladestroms",
     "can be dangerous and may cause": "kann gefährlich sein und verursachen",
     "damage to your battery or charger!": "Schäden an Ihrem Akku oder Ladegerät!",
     "Charge Current Override": "Ladestrom-Überbrückung",
-    "RAM Voltage Display Mode": "RAM-Spannungsanzeigemodus",
+    "Display Color Preset": "Farbprofil",
-    "Polling Interval": "Abfrageintervall",
+    "Basic": "Standard",
+    "Saturated": "Gesättigt",
+    "Washed": "Verblasst",
+    "Natural": "Natürlich",
+    "Vivid": "Lebendig",
+
     "CPU Governor Minimum Frequency": "Mindestfrequenz des CPU-Reglers",
+    " Usage of unsafe display": "Verwendung unsicherer Bildschirmfrequenzen",
     "refresh rates may cause stress": "Bildwiederholraten können Stress verursachen",
     "or damage to your display! ": "oder Schäden an Ihrem Display!",
     "Proceed at your own risk!": "Das Vorgehen erfolgt auf eigene Gefahr!",
     "Max Handheld Display": "Max Handheld-Display",
+    "Max Handheld Display Hz": "Max. Handheld-Hz",
     "Display Clock": "Uhr anzeigen",
+    " Adjust the display voltage": "Display-Spannung anpassen",
+    "with caution to avoid damage": "mit Vorsicht, um Schäden zu vermeiden",
+    "to your display panel! ": "am Display-Panel!",
+    "Display Voltage": "Display-Spannung",
+
+    "Thermal Throttle Limit": "Thermische Drosselgrenze",
     "Official Rating": "Offizielle Bewertung",
     "TDP Threshold": "TDP-Schwellenwert",
     "Power": "Macht",
-    "Thermal Throttle Limit": "Thermische Drosselgrenze",
     "HP Mode": "HP-Modus",
-    "Default (Mariko)": "Standard (Mariko)",
+
-    "Default (Erista)": "Standard (Erista)",
+    "DVB Shift": "DVB-Versatz",
-    "Rating": "Bewertung",
+    "SoC Max Volt": "SoC Max-Spannung",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
+    "Step Mode": "Schritt-Modus",
-    "Safe Max (Erista)": "Safe Max (Erista)",
     "RAM VDD2 Voltage": "RAM VDD2 Spannung",
-    "Voltage": "Spannung",
     "RAM VDDQ Voltage": "RAM-VDDQ-Spannung",
+    "Voltage": "Spannung",
     "RAM Frequency Editor": "RAM-Frequenzeditor",
-    "JEDEC.": "JEDEC.",
+    "Ram Max Clock": "Ram Max Takt",
-    "High speedo needed!": "Hoher Tacho erforderlich!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (Benötigt extremen Tacho/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (Benötigt extremen Tacho/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (Benötigt extremen Tacho/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (Benötigt lächerlichen Tacho/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (Benötigt lächerlichen Tacho/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (Benötigt lächerlichen Tacho/PLL)",
-    "Ram Max Clock": "Ram Max Uhr",
     "RAM Latency Editor": "RAM-Latenz-Editor",
     "RAM Timing Reductions": "Reduzierung des RAM-Timings",
     "Memory Timings": "Speicherzeiten",
@@ -102,6 +115,15 @@
     "Memory Latencies": "Speicherlatenzen",
     "Read Latency": "Leselatenz",
     "Write Latency": "Schreiblatenz",
+    "High speedo needed!": "Hoher Speedo-Wert erforderlich!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (Benötigt extremen Speedo/PLL)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (Benötigt extremen Speedo/PLL)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (Benötigt extremen Speedo/PLL)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (Benötigt lächerlichen Speedo/PLL)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (Benötigt lächerlichen Speedo/PLL)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (Benötigt lächerlichen Speedo/PLL)",
+    "JEDEC.": "JEDEC.",
+
     "CPU Boost Clock": "CPU-Boost-Takt",
     "CPU UV": "CPU-UV",
     "CPU Unlock": "CPU-Entsperrung",
@@ -110,32 +132,84 @@
     "CPU Max Clock": "Maximaler CPU-Takt",
     "Extreme UV Table": "Extremer UV-Tisch",
     "CPU UV Table": "CPU-UV-Tisch",
-    "CPU Low UV": "CPU-niedrige UV-Strahlung",
+    "CPU Low UV": "CPU niedrige UV",
-    "CPU High UV": "CPU Hohe UV-Strahlung",
+    "CPU High UV": "CPU hohe UV",
     "CPU Low VMIN": "CPU niedrig VMIN",
     "CPU High VMIN": "CPU hoch VMIN",
+
     "No Undervolt": "Kein Undervolt",
-    "SLT Table": "SLT-Tisch",
+    "SLT Table": "SLT-Tabelle",
     "HiOPT Table": "HiOPT-Tabelle",
     "GPU Undervolt Table": "GPU-Unterspannungstabelle",
     "GPU Minimum Voltage": "GPU-Mindestspannung",
-    "Calculate GPU Vmin": "Berechnen Sie die GPU-Vmin",
+    "Calculate GPU Vmin": "GPU-Vmin berechnen",
     "GPU VMIN": "GPU-VMIN",
     "GPU Maximum Voltage": "Maximale GPU-Spannung",
     "GPU Voltage Offset": "GPU-Spannungsoffset",
-    "Do not override": "Nicht überschreiben",
-    "Enabled (Default)": "Aktiviert (Standard)",
-    "96.6% limit": "96,6 %-Grenze",
-    "99.7% limit": "99,7 %-Grenze",
-    "GPU Scheduling Override": "GPU-Planungsüberschreibung",
-    "Official Service": "Offizieller Dienst",
     "GPU DVFS Mode": "GPU-DVFS-Modus",
     "GPU DVFS Offset": "GPU-DVFS-Offset",
     "GPU Voltage Table": "GPU-Spannungstabelle",
     "GPU Custom Table (mV)": "Benutzerdefinierte GPU-Tabelle (mV)",
+    "Official Service": "Offizieller Dienst",
+    "96.6% limit": "96,6 %-Grenze",
+    "99.7% limit": "99,7 %-Grenze",
+    " Setting GPU Clocks past": "GPU-Takt überschreiten",
+    "1228MHz without a proper undervolt": "1228 MHz ohne korrekten Undervolt",
+    "can cause degradation or damage": "kann Degradierung oder Schäden verursachen",
+    "to your console!": "an Ihrer Konsole!",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz ohne UV, 1152 MHz auf SLT",
     "or 1228MHz on HiOPT can cause ": "oder 1228 MHz auf HiOPT kann dazu führen",
-    "permanent damage to your Switch!": "Dauerhafter Schaden an Ihrem Switch!",
+    "permanent damage to your Switch!": "dauerhafter Schaden an Ihrem Switch!",
     "921MHz without UV and 960MHz on": "921 MHz ohne UV und 960 MHz eingeschaltet",
-    "SLT or HiOPT can cause ": "SLT oder HiOPT können dazu führen"
+    "SLT or HiOPT can cause ": "SLT oder HiOPT können dazu führen",
+
+    "Default (Mariko)": "Standard (Mariko)",
+    "Default (Erista)": "Standard (Erista)",
+    "Rating": "Bewertung",
+    "Safe Max (Mariko)": "Safe Max (Mariko)",
+    "Safe Max (Erista)": "Safe Max (Erista)",
+
+    "Voltages": "Spannungen",
+    "RAM Voltage:": "RAM-Spannung:",
+    "Display Voltage:": "Display-Spannung:",
+    "Temperatures": "Temperaturen",
+    "PLLX Temp:": "PLLX Temp:",
+    "AOTAG Temp:": "AOTAG Temp:",
+    "BQ24193 Temp:": "BQ24193 Temp:",
+    "Normal": "Normal",
+    "Warm": "Warm",
+    "Hot": "Heiß",
+    "Overheat": "Überhitzung",
+    "Not Patched": "Nicht gepatcht",
+    "Invalid": "Ungültig",
+    "RAM Bandwidth": "RAM-Bandbreite",
+    "RAM BW (Peak):": "RAM-BW (Max.):",
+    "RAM BW (All):": "RAM-BW (Ges.):",
+    "RAM BW (CPU):": "RAM-BW (CPU):",
+    "RAM BW (GPU):": "RAM-BW (GPU):",
+    "Hardware Info": "Hardware-Info",
+    "Console Type:": "Konsolentyp:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "DRAM-Modul: ",
+    "Software Info": "Software-Info",
+    "KIP version:": "KIP-Version:",
+    "sys-dock status:": "Sys-Dock-Status:",
+    "SaltyNX status:": "SaltyNX-Status:",
+    "RR Display status:": "RR Anzeigestatus:",
+    "Wafer Position:": "Waferposition:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "Modul:",
+    "Board": "Vorstand",
+    "Display": "Anzeige",
+
+    "Developers": "Entwickler",
+    "Contributors": "Mitwirkende",
+    "Testers": "Tester",
+    "Translators": "Übersetzer",
+    "Special Thanks": "Besonderer Dank",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "Kompilieren mit minimalen Funktionen",
+    "THE BEER-WARE LICENSE": "DIE BIERWAREN-LIZENZ"
 }

config/horizon-oc/lang/en.json

@@ -60,16 +60,19 @@
     "Display Settings": "Display Settings",
     "Experimental": "Experimental",
     "GPU Scheduling Override Method": "GPU Scheduling Override Method",
+    "Memory Frequency Measurement Mode": "RAM MHz Measurement Mode",
     "can be dangerous and may cause": "can be dangerous and may cause",
     "damage to your battery or charger!": "damage to your battery or charger!",
     "Charge Current Override": "Charge Current Override",
     "RAM Voltage Display Mode": "RAM Voltage Display Mode",
     "Polling Interval": "Polling Interval",
+    "Enable Experimental Settings": "Experimental Settings",
     "CPU Governor Minimum Frequency": "CPU Governor Minimum Frequency",
     "refresh rates may cause stress": "refresh rates may cause stress",
     "or damage to your display! ": "or damage to your display! ",
     "Proceed at your own risk!": "Proceed at your own risk!",
-    "Max Handheld Display": "Max Handheld Display",
+    "Display Refresh Rate Changing": "Display Hz Changing",
+    "Max Handheld Display Hz": "Max Handheld",
     "Display Clock": "Display Clock",
     "Official Rating": "Official Rating",
     "TDP Threshold": "TDP Threshold",
@@ -107,6 +110,9 @@
     "Read Latency": "Read Latency",
     "Write Latency": "Write Latency",
     "CPU Boost Clock": "Boost Clock",
+    "Auto CPU RAM OC": "Auto CPU → RAM OC",
+    "Auto CPU RAM OC CPU clock": "Auto CPU: CPU MHz",
+    "Auto CPU RAM OC Threshold": "Auto CPU: RAM Threshold",
     "CPU UV": "CPU UV",
     "CPU Unlock": "CPU Unlock",
     "CPU VMIN": "CPU VMIN",
@@ -122,7 +128,7 @@
     "SLT Table": "SLT Table",
     "HiOPT Table": "HiOPT Table",
     "GPU Undervolt Table": "Undervolt Table",
-    "GPU Minimum Voltage": "GPU Minimum Voltage",
+    "GPU Minimum Voltage": "Minimum Voltage",
     "Calculate GPU Vmin": "Calculate GPU Vmin",
     "GPU VMIN": "Minimum Voltage",
     "GPU Maximum Voltage": "Maximum Voltage",

config/horizon-oc/lang/es.json

@@ -1,141 +1,215 @@
 {
     "Information": "Información",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Módulo:",
-    "sys-dock status:": "estado del sys-dock:",
-    "SaltyNX status:": "Estado de SaltyNX:",
-    "RR Display status:": "Estado de visualización RR:",
-    "Wafer Position:": "Posición de la oblea:",
-    "Credits": "Créditos",
-    "Developers": "Desarrolladores",
-    "Contributors": "Colaboradores",
-    "Testers": "Probadores",
-    "Special Thanks": "agradecimiento especial",
     "Unknown": "Desconocido",
     "Installed": "Instalado",
     "Not Installed": "No instalado",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LA LICENCIA DE CERVEZA",
     "Default": "Predeterminado",
-    "Do Not Override": "No anular",
+    "Do Not Override": "No sobrescribir",
-    "Disabled": "Discapacitado",
+    "Do not override": "No sobrescribir",
-    "Enabled": "Habilitado",
+    "Disabled": "Desactivado",
-    " \\ue0e3 Reset": "\\ue0e3 Restablecer",
+    "Enabled": "Activado",
-    "Display": "Pantalla",
+    "Enabled (Default)": "Activado (predeterminado)",
-    "Application changed\\n\\n": "Aplicación modificada\\n\\n",
+    "Enable": "Activar",
-    "The running application changed\\n\\n": "La aplicación en ejecución cambió\\n\\n",
+    "Fatal error": "Error fatal",
-    "while editing was going on.": "mientras se realizaba la edición.",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al sysmodule hoc-clk.\\n\\n",
-    "Board": "tablero",
+    "Please make sure everything is\\n\\n": "Asegúrate de que todo esté\\n\\n",
-    "%u.%u%u mV": "%u.%u%u mV",
+    "correctly installed and enabled.": "correctamente instalado y activado.",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "No se pudo conectar al módulo del sistema hoc-clk.\\n\\n",
+
-    "Please make sure everything is\\n\\n": "Por favor asegúrese de que todo esté\\n\\n",
-    "correctly installed and enabled.": "correctamente instalado y habilitado.",
-    "Fatal error": "error fatal",
-    "Temporary Overrides ": "Anulaciones temporales",
-    "Sleep Mode": "Modo de suspensión",
-    "Stock": "Valores",
-    "Dev OC": "Desarrollador OC",
-    "Boost Mode": "Modo de impulso",
-    "Safe Max": "Máximo seguro",
-    "Unsafe Max": "Máximo inseguro",
-    "Absolute Max": "Máximo absoluto",
-    "Handheld Safe Max": "Caja fuerte de mano máx.",
-    "Enable": "Habilitar",
     "Edit App Profile": "Editar perfil de aplicación",
     "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Anulaciones temporales",
+    "Temporary Overrides": "Ajustes temporales",
+    "Temporary Overrides ": "Ajustes temporales",
+    "  Reset": " Restablecer",
     "Settings": "Configuración",
     "About": "Acerca de",
-    "Compiling with minimal features": "Compilando con características mínimas",
+    "Credits": "Créditos",
-    "General Settings": "Configuraciones generales",
+
-    "Governor Settings": "Configuración del gobernador",
+    "Application changed\\n\\n": "Aplicación cambiada\\n\\n",
-    "Safety Settings": "Configuraciones de seguridad",
+    "The running application changed\\n\\n": "La aplicación en ejecución ha cambiado\\n\\n",
-    "Save KIP Settings": "Guardar configuración de KIP",
+    "while editing was going on.": "mientras se estaba editando.",
+
+    "Sleep Mode": "Modo reposo",
+    "Stock": "Valores de fábrica",
+    "Dev OC": "OC de desarrollo",
+    "Boost Mode": "Modo boost",
+    "Safe Max": "Máximo seguro",
+    "Unsafe Max": "Máximo no seguro",
+    "Absolute Max": "Máximo absoluto",
+    "Handheld Safe Max": "Máximo seguro en portátil",
+
+    "General Settings": "Configuración general",
+    "Governor Settings": "Configuración del governor",
+    "Safety Settings": "Configuración de seguridad",
+    "Save KIP Settings": "Guardar configuración KIP",
     "RAM Settings": "Configuración de RAM",
-    "CPU Settings": "Configuración de la CPU",
+    "CPU Settings": "Configuración de CPU",
     "GPU Settings": "Configuración de GPU",
     "Display Settings": "Configuración de pantalla",
+    "Experimental Settings": "Configuración experimental",
     "Experimental": "Experimental",
-    "GPU Scheduling Override Method": "Método de anulación de programación de GPU",
+
-    "can be dangerous and may cause": "puede ser peligroso y puede causar",
+    " Settings marked in blue": "La configuración en azul",
-    "damage to your battery or charger!": "¡Daños a su batería o cargador!",
+    "don't require a reboot to apply!": "no requiere reinicio para aplicarse.",
-    "Charge Current Override": "Anulación de corriente de carga",
+    "You can also press  to show": "Pulsa  para mostrar",
+    "information about each setting.": "información sobre cada ajuste.",
+
+    " Experimental Settings are incomplete ": "La configuración experimental está incompleta",
+    "and may not work correctly or at all!": "y puede que no funcione correctamente.",
+    "Here be dragons!": "¡Aquí hay dragones!",
+
     "RAM Voltage Display Mode": "Modo de visualización de voltaje de RAM",
+    "RAM Display Unit": "Unidad de visualización RAM",
     "Polling Interval": "Intervalo de sondeo",
-    "CPU Governor Minimum Frequency": "Frecuencia mínima del gobernador de CPU",
+
-    "refresh rates may cause stress": "Las frecuencias de actualización pueden causar estrés.",
+    "GPU Scheduling Override Method": "Método de sobrescritura del scheduling de GPU",
-    "or damage to your display! ": "o daños a su pantalla!",
+    "GPU Scheduling Override": "Sobrescritura de scheduling de GPU",
-    "Proceed at your own risk!": "¡Continúe bajo su propio riesgo!",
+    "GPU Boot Volt": "Voltaje de arranque GPU",
-    "Max Handheld Display": "Pantalla portátil máxima",
+    "GPU Boot Voltage": "Voltaje de arranque GPU",
-    "Display Clock": "Reloj de pantalla",
+    "Memory Frequency Measurement Mode": "Modo de medición de frecuencia de memoria",
-    "Official Rating": "Calificación oficial",
+    " Overriding the charge current": "Sobrescribir la corriente de carga",
+    "can be dangerous and may cause": "puede ser peligroso y causar",
+    "damage to your battery or charger!": "daños a la batería o al cargador.",
+    "Charge Current Override": "Sobrescritura de corriente de carga",
+    "Display Color Preset": "Preajuste de color",
+    "Basic": "Básico",
+    "Saturated": "Saturado",
+    "Washed": "Lavado",
+    "Natural": "Natural",
+    "Vivid": "Vívido",
+
+    "CPU Governor Minimum Frequency": "Frecuencia mínima del governor de CPU",
+    " Usage of unsafe display": "El uso de frecuencias de pantalla",
+    "refresh rates may cause stress": "las tasas de refresco pueden causar estrés",
+    "or damage to your display! ": "o dañar la pantalla.",
+    "Proceed at your own risk!": "¡Úsalo bajo tu propio riesgo!",
+    "Max Handheld Display": "Frecuencia máxima de pantalla en portátil",
+    "Max Handheld Display Hz": "Hz máximo en modo portátil",
+    "Display Clock": "Frecuencia de pantalla",
+    " Adjust the display voltage": "Ajusta el voltaje de pantalla",
+    "with caution to avoid damage": "con cuidado para evitar daños",
+    "to your display panel! ": "al panel de pantalla.",
+    "Display Voltage": "Voltaje de pantalla",
+
+    "Thermal Throttle Limit": "Límite de thermal throttling",
+    "Official Rating": "Valor oficial",
     "TDP Threshold": "Umbral de TDP",
-    "Power": "poder",
+    "Power": "Potencia",
-    "Thermal Throttle Limit": "Límite del acelerador térmico",
+    "HP Mode": "Modo alto rendimiento",
-    "HP Mode": "Modo HP",
+
-    "Default (Mariko)": "Predeterminado (Mariko)",
+    "DVB Shift": "Desplazamiento DVB",
-    "Default (Erista)": "Predeterminado (Erista)",
+    "SoC Max Volt": "Voltaje máximo del SoC",
-    "Rating": "Calificación",
+    "Step Mode": "Modo de paso",
-    "Safe Max (Mariko)": "Max seguro (Mariko)",
+    "RAM VDD2 Voltage": "Voltaje VDD2 de RAM",
-    "Safe Max (Erista)": "Safe Max (Erista)",
+    "RAM VDDQ Voltage": "Voltaje VDDQ de RAM",
-    "RAM VDD2 Voltage": "Voltaje RAM VDD2",
+    "Voltage": "Voltaje",
-    "Voltage": "voltaje",
+    "RAM Frequency Editor": "Editor de frecuencia de RAM",
-    "RAM VDDQ Voltage": "Voltaje RAM VDDQ",
+    "Ram Max Clock": "Frecuencia máxima de RAM",
-    "RAM Frequency Editor": "Editor de frecuencia RAM",
+    "RAM Latency Editor": "Editor de latencias de RAM",
-    "JEDEC.": "JEDEC.",
+    "RAM Timing Reductions": "Reducción de timings de RAM",
-    "High speedo needed!": "¡Se necesita alta velocidad!",
+    "Memory Timings": "Timings de memoria",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (Necesita Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (Necesita Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (Necesita Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (Necesita Speedo/PLL ridículo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (Necesita Speedo/PLL ridículo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (Necesita Speedo/PLL ridículo)",
-    "Ram Max Clock": "Ram Max Reloj",
-    "RAM Latency Editor": "Editor de latencia de RAM",
-    "RAM Timing Reductions": "Reducciones de tiempo de RAM",
-    "Memory Timings": "Tiempos de memoria",
     "Advanced": "Avanzado",
-    "t6 tRTW Fine Tune": "t6 tRTW Ajuste fino",
+    "t6 tRTW Fine Tune": "Ajuste fino t6 tRTW",
     "tRTW Fine Tune": "Ajuste fino tRTW",
-    "t7 tWTR Fine Tune": "t7 tWTR Ajuste fino",
+    "t7 tWTR Fine Tune": "Ajuste fino t7 tWTR",
-    "tWTR Fine Tune": "Ajuste fino de tWTR",
+    "tWTR Fine Tune": "Ajuste fino tWTR",
-    "Memory Latencies": "Latencias de la memoria",
+    "Memory Latencies": "Latencias de memoria",
-    "Read Latency": "Leer latencia",
+    "Read Latency": "Latencia de lectura",
     "Write Latency": "Latencia de escritura",
-    "CPU Boost Clock": "Reloj de aumento de CPU",
+    "High speedo needed!": "¡Se necesita alto speedo!",
-    "CPU UV": "procesador ultravioleta",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (requiere Speedo/PLL extremo)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (requiere Speedo/PLL extremo)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (requiere Speedo/PLL extremo)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (requiere Speedo/PLL muy alto)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (requiere Speedo/PLL muy alto)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (requiere Speedo/PLL muy alto)",
+    "JEDEC.": "JEDEC",
+
+    "CPU Boost Clock": "Frecuencia boost de CPU",
+    "CPU UV": "Undervolt de CPU",
     "CPU Unlock": "Desbloqueo de CPU",
-    "CPU VMIN": "CPU VMIN",
+    "CPU VMIN": "VMIN de CPU",
-    "CPU Max Voltage": "Voltaje máximo de la CPU",
+    "CPU Max Voltage": "Voltaje máximo de CPU",
-    "CPU Max Clock": "Reloj máximo de CPU",
+    "CPU Max Clock": "Frecuencia máxima de CPU",
-    "Extreme UV Table": "Mesa UV extrema",
+    "Extreme UV Table": "Tabla de undervolt extrema",
-    "CPU UV Table": "Tabla UV de CPU",
+    "CPU UV Table": "Tabla de undervolt de CPU",
-    "CPU Low UV": "CPU baja radiación ultravioleta",
+    "CPU Low UV": "Undervolt bajo de CPU",
-    "CPU High UV": "CPU alta UV",
+    "CPU High UV": "Undervolt alto de CPU",
     "CPU Low VMIN": "VMIN bajo de CPU",
     "CPU High VMIN": "VMIN alto de CPU",
-    "No Undervolt": "Sin subvoltaje",
+
-    "SLT Table": "Mesa TR",
+    "No Undervolt": "Sin undervolt",
+    "SLT Table": "Tabla SLT",
     "HiOPT Table": "Tabla HiOPT",
-    "GPU Undervolt Table": "Tabla de subvoltaje de GPU",
+    "GPU Undervolt Table": "Tabla de undervolt de GPU",
     "GPU Minimum Voltage": "Voltaje mínimo de GPU",
-    "Calculate GPU Vmin": "Calcular GPU Vmin",
+    "Calculate GPU Vmin": "Calcular Vmin de GPU",
-    "GPU VMIN": "GPU VMIN",
+    "GPU VMIN": "VMIN de GPU",
     "GPU Maximum Voltage": "Voltaje máximo de GPU",
-    "GPU Voltage Offset": "Compensación de voltaje de GPU",
+    "GPU Voltage Offset": "Offset de voltaje de GPU",
-    "Do not override": "no anular",
+    "GPU DVFS Mode": "Modo DVFS de GPU",
-    "Enabled (Default)": "Habilitado (predeterminado)",
+    "GPU DVFS Offset": "Offset DVFS de GPU",
-    "96.6% limit": "límite del 96,6%",
-    "99.7% limit": "límite del 99,7%",
-    "GPU Scheduling Override": "Anulación de programación de GPU",
-    "Official Service": "Servicio Oficial",
-    "GPU DVFS Mode": "Modo GPU DVFS",
-    "GPU DVFS Offset": "Compensación DVFS de GPU",
     "GPU Voltage Table": "Tabla de voltaje de GPU",
     "GPU Custom Table (mV)": "Tabla personalizada de GPU (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075MHz sin UV, 1152MHz en SLT",
+    "Official Service": "Servicio oficial",
-    "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar",
+    "96.6% limit": "Límite 96,6%",
-    "permanent damage to your Switch!": "¡Daño permanente a tu Switch!",
+    "99.7% limit": "Límite 99,7%",
-    "921MHz without UV and 960MHz on": "921MHz sin UV y 960MHz encendido",
+    " Setting GPU Clocks past": "Ajustar frecuencias de GPU más allá",
-    "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar"
+    "1228MHz without a proper undervolt": "1228MHz sin undervolt adecuado",
+    "can cause degradation or damage": "puede causar degradación o daños",
+    "to your console!": "a tu consola.",
+    "1075MHz without UV, 1152MHz on SLT": "1075MHz sin undervolt, 1152MHz en SLT",
+    "or 1228MHz on HiOPT can cause ": "o 1228MHz en HiOPT pueden causar ",
+    "permanent damage to your Switch!": "¡daño permanente a tu Switch!",
+    "921MHz without UV and 960MHz on": "921MHz sin undervolt y 960MHz en",
+    "SLT or HiOPT can cause ": "SLT o HiOPT pueden causar ",
+
+    "Default (Mariko)": "Predeterminado (Mariko)",
+    "Default (Erista)": "Predeterminado (Erista)",
+    "Rating": "Valor",
+    "Safe Max (Mariko)": "Máximo seguro (Mariko)",
+    "Safe Max (Erista)": "Máximo seguro (Erista)",
+
+    "Voltages": "Voltajes",
+    "RAM Voltage:": "Voltaje RAM:",
+    "Display Voltage:": "Voltaje de pantalla:",
+    "Temperatures": "Temperaturas",
+    "PLLX Temp:": "PLLX Temp:",
+    "AOTAG Temp:": "AOTAG Temp:",
+    "BQ24193 Temp:": "BQ24193 Temp:",
+    "Normal": "Normal",
+    "Warm": "Cálido",
+    "Hot": "Caliente",
+    "Overheat": "Sobrecalentamiento",
+    "Not Patched": "Sin parche",
+    "Invalid": "Inválido",
+    "RAM Bandwidth": "Ancho de banda RAM",
+    "RAM BW (Peak):": "BW RAM (Pico):",
+    "RAM BW (All):": "BW RAM (Todo):",
+    "RAM BW (CPU):": "BW RAM (CPU):",
+    "RAM BW (GPU):": "BW RAM (GPU):",
+    "Hardware Info": "Info de hardware",
+    "Console Type:": "Tipo de consola:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "Módulo DRAM: ",
+    "Software Info": "Info de software",
+    "KIP version:": "Versión KIP:",
+    "sys-dock status:": "Estado de sys-dock:",
+    "SaltyNX status:": "Estado de SaltyNX:",
+    "RR Display status:": "Estado de pantalla RR:",
+    "Wafer Position:": "Posición del wafer:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "Módulo:",
+    "Board": "Placa",
+    "Display": "Pantalla",
+
+    "Developers": "Desarrolladores",
+    "Contributors": "Colaboradores",
+    "Testers": "Testers",
+    "Translators": "Traductores",
+    "Special Thanks": "Agradecimientos especiales",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "Compilado con funciones mínimas",
+    "THE BEER-WARE LICENSE": "LICENCIA BEER-WARE"
 }

config/horizon-oc/lang/fr.json

@@ -1,141 +1,215 @@
 {
     "Information": "Informations",
-    "IDDQ:": "IDDQ :",
-    "Module: ": "Module :",
-    "sys-dock status:": "état du dock système :",
-    "SaltyNX status:": "Statut SaltyNX :",
-    "RR Display status:": "Etat d'affichage RR :",
-    "Wafer Position:": "Position de la plaquette :",
-    "Credits": "Crédits",
-    "Developers": "Développeurs",
-    "Contributors": "Contributeurs",
-    "Testers": "Testeurs",
-    "Special Thanks": "Remerciements spéciaux",
     "Unknown": "Inconnu",
     "Installed": "Installé",
     "Not Installed": "Non installé",
-    "X: %u Y: %u": "X : %u Y : %u",
-    "THE BEER-WARE LICENSE": "LA LICENCE DE LA BIÈRE",
     "Default": "Par défaut",
     "Do Not Override": "Ne pas remplacer",
+    "Do not override": "Ne pas remplacer",
     "Disabled": "Désactivé",
     "Enabled": "Activé",
-    " \\ue0e3 Reset": "\\ue0e3 Réinitialiser",
+    "Enabled (Default)": "Activé (par défaut)",
-    "Display": "Affichage",
+    "Enable": "Activer",
-    "Application changed\\n\\n": "Application modifiée\\n\\n",
+    "Fatal error": "Erreur fatale",
-    "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au sysmodule hoc-clk.\\n\\n",
-    "while editing was going on.": "pendant le montage.",
-    "Board": "Conseil",
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossible de se connecter au module système hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Veuillez vous assurer que tout est\\n\\n",
     "correctly installed and enabled.": "correctement installé et activé.",
-    "Fatal error": "Erreur fatale",
+
-    "Temporary Overrides ": "Remplacements temporaires",
+    "Edit App Profile": "Modifier le profil de l'app",
-    "Sleep Mode": "Mode veille",
-    "Stock": "Actions",
-    "Dev OC": "Développeur OC",
-    "Boost Mode": "Mode Boost",
-    "Safe Max": "Coffre-fort maximum",
-    "Unsafe Max": "Dangereux Max",
-    "Absolute Max": "Max absolu",
-    "Handheld Safe Max": "Coffre-fort portatif Max",
-    "Enable": "Activer",
-    "Edit App Profile": "Modifier le profil de l'application",
     "Edit Global Profile": "Modifier le profil global",
-    "Temporary Overrides": "Remplacements temporaires",
+    "Temporary Overrides": "Forçages temporaires",
+    "Temporary Overrides ": "Forçages temporaires ",
+    "  Reset": " Réinitialiser",
     "Settings": "Paramètres",
     "About": "À propos",
-    "Compiling with minimal features": "Compilation avec des fonctionnalités minimales",
+    "Credits": "Crédits",
+
+    "Application changed\\n\\n": "Application modifiée\\n\\n",
+    "The running application changed\\n\\n": "L'application en cours d'exécution a changé\\n\\n",
+    "while editing was going on.": "pendant la modification.",
+
+    "Sleep Mode": "Mode veille",
+    "Stock": "D'origine",
+    "Dev OC": "OC Développeur",
+    "Boost Mode": "Mode Boost",
+    "Safe Max": "Max sûr",
+    "Unsafe Max": "Max non sûr",
+    "Absolute Max": "Max absolu",
+    "Handheld Safe Max": "Max sûr (mode portable)",
+
     "General Settings": "Paramètres généraux",
     "Governor Settings": "Paramètres du gouverneur",
     "Safety Settings": "Paramètres de sécurité",
     "Save KIP Settings": "Enregistrer les paramètres KIP",
-    "RAM Settings": "Paramètres de la RAM",
+    "RAM Settings": "Paramètres RAM",
-    "CPU Settings": "Paramètres du processeur",
+    "CPU Settings": "Paramètres CPU",
-    "GPU Settings": "Paramètres du processeur graphique",
+    "GPU Settings": "Paramètres GPU",
     "Display Settings": "Paramètres d'affichage",
+    "Experimental Settings": "Paramètres expérimentaux",
     "Experimental": "Expérimental",
-    "GPU Scheduling Override Method": "Méthode de remplacement de la planification GPU",
+
-    "can be dangerous and may cause": "peut être dangereux et provoquer",
+    " Settings marked in blue": "Les paramètres en bleu",
-    "damage to your battery or charger!": "dommages à votre batterie ou à votre chargeur !",
+    "don't require a reboot to apply!": "ne nécessitent pas de redémarrage !",
-    "Charge Current Override": "Remplacement du courant de charge",
+    "You can also press  to show": "Appuyez aussi sur  pour afficher",
-    "RAM Voltage Display Mode": "Mode d'affichage de la tension de la RAM",
+    "information about each setting.": "les informations sur chaque paramètre.",
+
+    " Experimental Settings are incomplete ": "Les paramètres expérimentaux sont incomplets",
+    "and may not work correctly or at all!": "et peuvent ne pas fonctionner du tout !",
+    "Here be dragons!": "Ici, il y a des dragons !",
+
+    "RAM Voltage Display Mode": "Mode d'affichage de la tension RAM",
+    "RAM Display Unit": "Unité d'affichage RAM",
     "Polling Interval": "Intervalle d'interrogation",
-    "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur du processeur",
+
-    "refresh rates may cause stress": "les taux de rafraîchissement peuvent causer du stress",
+    "GPU Scheduling Override Method": "Méthode de Forçage de l'ordonnancement GPU",
-    "or damage to your display! ": "ou endommager votre écran !",
+    "GPU Scheduling Override": "Forçage de l'ordonnancement GPU",
-    "Proceed at your own risk!": "Procédez à vos propres risques !",
+    "GPU Boot Volt": "Tension d'amorçage GPU",
-    "Max Handheld Display": "Affichage portable maximum",
+    "GPU Boot Voltage": "Tension d'amorçage GPU",
-    "Display Clock": "Affichage de l'horloge",
+    "Memory Frequency Measurement Mode": "Mode de mesure de fréquence mémoire",
+    " Overriding the charge current": "Le forçage du courant de charge",
+    "can be dangerous and may cause": "peut être dangereux et causer des",
+    "damage to your battery or charger!": "dommages à votre batterie ou chargeur !",
+    "Charge Current Override": "Forçage du courant de charge",
+    "Display Color Preset": "Préréglage de couleur",
+    "Basic": "Basique",
+    "Saturated": "Saturé",
+    "Washed": "Délavé",
+    "Natural": "Naturel",
+    "Vivid": "Vif",
+
+    "CPU Governor Minimum Frequency": "Fréquence minimale du gouverneur CPU",
+    " Usage of unsafe display": "L'utilisation de taux de rafraîchissement",
+    "refresh rates may cause stress": "les taux de rafraîchissement peuvent stresser",
+    "or damage to your display! ": "ou endommager votre écran !",
+    "Proceed at your own risk!": "À utiliser à vos propres risques !",
+    "Max Handheld Display": "Affichage portable max",
+    "Max Handheld Display Hz": "Hz max en mode portable",
+    "Display Clock": "Fréquence d'affichage",
+    " Adjust the display voltage": "Réglez la tension d'affichage",
+    "with caution to avoid damage": "avec précaution pour éviter des dommages",
+    "to your display panel! ": "à votre dalle d'affichage !",
+    "Display Voltage": "Tension d'affichage",
+
+    "Thermal Throttle Limit": "Limite d'étranglement thermique",
     "Official Rating": "Classement officiel",
     "TDP Threshold": "Seuil TDP",
-    "Power": "Puissance",
+    "Power": "Alimentation",
-    "Thermal Throttle Limit": "Limite d'accélérateur thermique",
     "HP Mode": "Mode HP",
-    "Default (Mariko)": "Par défaut (Mariko)",
+
-    "Default (Erista)": "Par défaut (Erista)",
+    "DVB Shift": "Décalage DVB",
-    "Rating": "Note",
+    "SoC Max Volt": "Tension max SoC",
-    "Safe Max (Mariko)": "Coffre-fort Max (Mariko)",
+    "Step Mode": "Mode pas à pas",
-    "Safe Max (Erista)": "Coffre-fort Max (Erista)",
+    "RAM VDD2 Voltage": "Tension RAM VDD2",
-    "RAM VDD2 Voltage": "Tension de la RAM VDD2",
+    "RAM VDDQ Voltage": "Tension RAM VDDQ",
     "Voltage": "Tension",
-    "RAM VDDQ Voltage": "Tension VDDQ de la RAM",
     "RAM Frequency Editor": "Éditeur de fréquence RAM",
-    "JEDEC.": "JEDEC.",
+    "Ram Max Clock": "Fréquence RAM max",
-    "High speedo needed!": "Besoin d'un speedo haut !",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite un Speedo/PLL extrême)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite un Speedo/PLL extrême)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite un Speedo/PLL extrême)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite un Speedo/PLL ridicule)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite un Speedo/PLL ridicule)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite un Speedo/PLL ridicule)",
-    "Ram Max Clock": "Ram Max Horloge",
     "RAM Latency Editor": "Éditeur de latence RAM",
-    "RAM Timing Reductions": "Réductions de synchronisation de la RAM",
+    "RAM Timing Reductions": "Réductions des timings RAM",
-    "Memory Timings": "Horaires de mémoire",
+    "Memory Timings": "Timings mémoire",
     "Advanced": "Avancé",
-    "t6 tRTW Fine Tune": "t6 tRTW réglage fin",
+    "t6 tRTW Fine Tune": "Ajustement précis t6 tRTW",
-    "tRTW Fine Tune": "tRTW Réglage fin",
+    "tRTW Fine Tune": "Ajustement précis tRTW",
-    "t7 tWTR Fine Tune": "t7 tWTR réglage fin",
+    "t7 tWTR Fine Tune": "Ajustement précis t7 tWTR",
-    "tWTR Fine Tune": "Réglage fin du tWTR",
+    "tWTR Fine Tune": "Ajustement précis tWTR",
-    "Memory Latencies": "Latences de mémoire",
+    "Memory Latencies": "Latences mémoire",
     "Read Latency": "Latence de lecture",
     "Write Latency": "Latence d'écriture",
-    "CPU Boost Clock": "Horloge d'augmentation du processeur",
+    "High speedo needed!": "Speedo élevé requis !",
-    "CPU UV": "UV du processeur",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (nécessite Speedo/PLL extrême)",
-    "CPU Unlock": "Déverrouillage du processeur",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (nécessite Speedo/PLL extrême)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (nécessite Speedo/PLL extrême)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (nécessite Speedo/PLL ridicule)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (nécessite Speedo/PLL ridicule)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (nécessite Speedo/PLL ridicule)",
+    "JEDEC.": "JEDEC.",
+
+    "CPU Boost Clock": "Fréquence Boost CPU",
+    "CPU UV": "UV CPU",
+    "CPU Unlock": "Déverrouillage CPU",
     "CPU VMIN": "CPU VMIN",
-    "CPU Max Voltage": "Tension maximale du processeur",
+    "CPU Max Voltage": "Tension CPU max",
-    "CPU Max Clock": "Horloge maximale du processeur",
+    "CPU Max Clock": "Fréquence CPU max",
-    "Extreme UV Table": "Table UV Extrême",
+    "Extreme UV Table": "Table d'UV extrême",
-    "CPU UV Table": "Tableau UV du processeur",
+    "CPU UV Table": "Table d'UV CPU",
-    "CPU Low UV": "CPU faible UV",
+    "CPU Low UV": "UV CPU faible",
-    "CPU High UV": "CPU UV élevé",
+    "CPU High UV": "UV CPU élevé",
-    "CPU Low VMIN": "CPU faible VMIN",
+    "CPU Low VMIN": "VMIN CPU faible",
-    "CPU High VMIN": "Processeur VMIN élevé",
+    "CPU High VMIN": "VMIN CPU élevé",
-    "No Undervolt": "Pas de sous-tension",
+
-    "SLT Table": "Tableau SLT",
+    "No Undervolt": "Aucun Undervolt",
-    "HiOPT Table": "Tableau HiOPT",
+    "SLT Table": "Table SLT",
-    "GPU Undervolt Table": "Tableau de sous-tension GPU",
+    "HiOPT Table": "Table HiOPT",
-    "GPU Minimum Voltage": "Tension minimale du GPU",
+    "GPU Undervolt Table": "Table d'undervolt GPU",
-    "Calculate GPU Vmin": "Calculer la Vmin du GPU",
+    "GPU Minimum Voltage": "Tension GPU minimale",
+    "Calculate GPU Vmin": "Calculer Vmin GPU",
     "GPU VMIN": "GPU VMIN",
-    "GPU Maximum Voltage": "Tension maximale du GPU",
+    "GPU Maximum Voltage": "Tension GPU maximale",
-    "GPU Voltage Offset": "Décalage de tension du GPU",
+    "GPU Voltage Offset": "Offset de tension GPU",
-    "Do not override": "Ne remplacez pas",
-    "Enabled (Default)": "Activé (par défaut)",
-    "96.6% limit": "Limite de 96,6 %",
-    "99.7% limit": "Limite de 99,7 %",
-    "GPU Scheduling Override": "Remplacement de la planification GPU",
-    "Official Service": "Service officiel",
     "GPU DVFS Mode": "Mode GPU DVFS",
-    "GPU DVFS Offset": "Décalage GPU DVFS",
+    "GPU DVFS Offset": "Offset GPU DVFS",
-    "GPU Voltage Table": "Tableau de tension du GPU",
+    "GPU Voltage Table": "Table de tension GPU",
-    "GPU Custom Table (mV)": "Tableau personnalisé GPU (mV)",
+    "GPU Custom Table (mV)": "Table de GPU personnalisée (mV)",
+    "Official Service": "Service officiel",
+    "96.6% limit": "Limite de 96,6 %",
+    "99.7% limit": "Limite de 99,7 %",
+    " Setting GPU Clocks past": "Régler les fréquences GPU au-delà",
+    "1228MHz without a proper undervolt": "1228 MHz sans undervolt approprié",
+    "can cause degradation or damage": "peut causer une dégradation ou des dommages",
+    "to your console!": "à votre console !",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz sans UV, 1152 MHz sur SLT",
-    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut provoquer",
+    "or 1228MHz on HiOPT can cause ": "ou 1228 MHz sur HiOPT peut causer des",
-    "permanent damage to your Switch!": "dommages permanents à votre Switch !",
+    "permanent damage to your Switch!": "dommages permanents à votre Switch !",
-    "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz activé",
+    "921MHz without UV and 960MHz on": "921 MHz sans UV et 960 MHz sur",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent provoquer"
+    "SLT or HiOPT can cause ": "SLT ou HiOPT peuvent causer des",
+
+    "Default (Mariko)": "Par défaut (Mariko)",
+    "Default (Erista)": "Par défaut (Erista)",
+    "Rating": "Évaluation",
+    "Safe Max (Mariko)": "Max sûr (Mariko)",
+    "Safe Max (Erista)": "Max sûr (Erista)",
+
+    "Voltages": "Tensions",
+    "RAM Voltage:": "Tension RAM :",
+    "Display Voltage:": "Tension d'affichage :",
+    "Temperatures": "Températures",
+    "PLLX Temp:": "PLLX Temp :",
+    "AOTAG Temp:": "AOTAG Temp :",
+    "BQ24193 Temp:": "BQ24193 Temp :",
+    "Normal": "Normal",
+    "Warm": "Chaud",
+    "Hot": "Très chaud",
+    "Overheat": "Surchauffe",
+    "Not Patched": "Non patché",
+    "Invalid": "Invalide",
+    "RAM Bandwidth": "Bande passante RAM",
+    "RAM BW (Peak):": "BW RAM (Pic) :",
+    "RAM BW (All):": "BW RAM (Tout) :",
+    "RAM BW (CPU):": "BW RAM (CPU) :",
+    "RAM BW (GPU):": "BW RAM (GPU) :",
+    "Hardware Info": "Infos matériel",
+    "Console Type:": "Type de console :",
+    "Speedo:": "Speedo :",
+    "DRAM Module: ": "Module DRAM : ",
+    "Software Info": "Infos logiciel",
+    "KIP version:": "Version KIP :",
+    "sys-dock status:": "Statut de sys-dock :",
+    "SaltyNX status:": "Statut de SaltyNX :",
+    "RR Display status:": "Statut de l'affichage RR :",
+    "Wafer Position:": "Position du wafer :",
+    "IDDQ:": "IDDQ :",
+    "Module: ": "Module :",
+    "Board": "Carte",
+    "Display": "Écran",
+
+    "Developers": "Développeurs",
+    "Contributors": "Contributeurs",
+    "Testers": "Testeurs",
+    "Translators": "Traducteurs",
+    "Special Thanks": "Remerciements spéciaux",
+
+    "X: %u Y: %u": "X : %u Y : %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "Compilation avec fonctionnalités minimales",
+    "THE BEER-WARE LICENSE": "LA LICENCE BEER-WARE"
 }

config/horizon-oc/lang/it.json

@@ -1,141 +1,215 @@
 {
     "Information": "Informazioni",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Modulo:",
-    "sys-dock status:": "stato del dock di sistema:",
-    "SaltyNX status:": "Stato di SaltyNX:",
-    "RR Display status:": "Stato di visualizzazione RR:",
-    "Wafer Position:": "Posizione del wafer:",
-    "Credits": "Crediti",
-    "Developers": "Sviluppatori",
-    "Contributors": "Collaboratori",
-    "Testers": "Tester",
-    "Special Thanks": "Un ringraziamento speciale",
     "Unknown": "Sconosciuto",
     "Installed": "Installato",
     "Not Installed": "Non installato",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LA LICENZA PER GLI ARTICOLI DI BIRRA",
     "Default": "Predefinito",
-    "Do Not Override": "Non sovrascrivere",
+    "Do Not Override": "Non Sovrascrivere",
+    "Do not override": "Non sovrascrivere",
     "Disabled": "Disabilitato",
     "Enabled": "Abilitato",
-    " \\ue0e3 Reset": "\\ue0e3 Ripristina",
+    "Enabled (Default)": "Abilitato (impostazione predefinita)",
-    "Display": "Visualizzazione",
+    "Enable": "Abilita",
+    "Fatal error": "Errore fatale",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al sysmodule hoc-clk.\\n\\n",
+    "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n",
+    "correctly installed and enabled.": "correttamente installato e abilitato.",
+
+    "Edit App Profile": "Modifica Profilo Dell'App",
+    "Edit Global Profile": "Modifica Profilo Globale",
+    "Temporary Overrides": "Sostituzioni Temporanee",
+    "Temporary Overrides ": "Sostituzioni Temporanee",
+    "  Reset": " Ripristina",
+    "Settings": "Impostazioni",
+    "About": "A Riguardo Di",
+    "Credits": "Crediti",
+
     "Application changed\\n\\n": "Applicazione modificata\\n\\n",
     "The running application changed\\n\\n": "L'applicazione in esecuzione è cambiata\\n\\n",
     "while editing was going on.": "mentre era in corso la modifica.",
-    "Board": "Consiglio",
+
-    "%u.%u%u mV": "%u.%u%u mV",
+    "Sleep Mode": "Modalità di Sospensione",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "Impossibile connettersi al modulo di sistema hoc-clk.\\n\\n",
+    "Stock": "Originale",
-    "Please make sure everything is\\n\\n": "Assicurati che tutto sia\\n\\n",
+    "Dev OC": "OC dev",
-    "correctly installed and enabled.": "correttamente installato e abilitato.",
+    "Boost Mode": "Modalità Boost",
-    "Fatal error": "Errore fatale",
+    "Safe Max": "Massimo Sicuro",
-    "Temporary Overrides ": "Sostituzioni temporanee",
+    "Unsafe Max": "Massimo Non Sicuro",
-    "Sleep Mode": "Modalità di sospensione",
+    "Absolute Max": "Massimo Assoluto",
-    "Stock": "Magazzino",
+    "Handheld Safe Max": "Massimo Sicuro Modalità Portatile",
-    "Dev OC": "OC di sviluppo",
+
-    "Boost Mode": "Modalità potenziamento",
+    "General Settings": "Impostazioni Generali",
-    "Safe Max": "Sicuro massimo",
+    "Governor Settings": "Impostazioni Del Governor",
-    "Unsafe Max": "Non sicuro Max",
+    "Safety Settings": "Impostazioni Di Sicurezza",
-    "Absolute Max": "Massimo assoluto",
+    "Save KIP Settings": "Salva le impostazioni del KIP",
-    "Handheld Safe Max": "Cassaforte portatile max",
-    "Enable": "Abilita",
-    "Edit App Profile": "Modifica profilo dell'app",
-    "Edit Global Profile": "Modifica profilo globale",
-    "Temporary Overrides": "Sostituzioni temporanee",
-    "Settings": "Impostazioni",
-    "About": "Circa",
-    "Compiling with minimal features": "Compilazione con funzionalità minime",
-    "General Settings": "Impostazioni generali",
-    "Governor Settings": "Impostazioni del governatore",
-    "Safety Settings": "Impostazioni di sicurezza",
-    "Save KIP Settings": "Salva le impostazioni KIP",
     "RAM Settings": "Impostazioni della RAM",
     "CPU Settings": "Impostazioni della CPU",
     "GPU Settings": "Impostazioni della GPU",
-    "Display Settings": "Impostazioni di visualizzazione",
+    "Display Settings": "Impostazioni dello Schermo",
+    "Experimental Settings": "Impostazioni sperimentali",
     "Experimental": "Sperimentale",
-    "GPU Scheduling Override Method": "Metodo di override della pianificazione GPU",
+
+    " Settings marked in blue": "Le impostazioni in blu",
+    "don't require a reboot to apply!": "non richiedono un riavvio per applicarsi!",
+    "You can also press  to show": "Premi anche  per mostrare",
+    "information about each setting.": "informazioni su ogni impostazione.",
+
+    " Experimental Settings are incomplete ": "Le impostazioni sperimentali sono incomplete",
+    "and may not work correctly or at all!": "e potrebbero non funzionare correttamente!",
+    "Here be dragons!": "Qui ci sono draghi!",
+
+    "RAM Voltage Display Mode": "Modalità di Visualizzazione della Tensione RAM",
+    "RAM Display Unit": "Unità di visualizzazione RAM",
+    "Polling Interval": "Intervallo di polling",
+
+    "GPU Scheduling Override Method": "Metodo di override dello scheduling GPU",
+    "GPU Scheduling Override": "Override dello Scheduling GPU",
+    "GPU Boot Volt": "Tensione di avvio GPU",
+    "GPU Boot Voltage": "Tensione di avvio GPU",
+    "Memory Frequency Measurement Mode": "Modalità di misurazione della frequenza della memoria",
+    " Overriding the charge current": "L'override della corrente di carica",
     "can be dangerous and may cause": "può essere pericoloso e può causare",
     "damage to your battery or charger!": "danni alla batteria o al caricabatterie!",
-    "Charge Current Override": "Override della corrente di carica",
+    "Charge Current Override": "Override della Corrente di Carica",
-    "RAM Voltage Display Mode": "Modalità di visualizzazione della tensione RAM",
+    "Display Color Preset": "Preimpostazione colore",
-    "Polling Interval": "Intervallo di polling",
+    "Basic": "Base",
-    "CPU Governor Minimum Frequency": "Frequenza minima del governatore della CPU",
+    "Saturated": "Saturo",
+    "Washed": "Sbiadito",
+    "Natural": "Naturale",
+    "Vivid": "Vivace",
+
+    "CPU Governor Minimum Frequency": "Frequenza minima del Governor della CPU",
+    " Usage of unsafe display": "L'uso di frequenze di aggiornamento",
     "refresh rates may cause stress": "le frequenze di aggiornamento possono causare stress",
     "or damage to your display! ": "o danni al display!",
     "Proceed at your own risk!": "Procedi a tuo rischio e pericolo!",
-    "Max Handheld Display": "Display portatile massimo",
+    "Max Handheld Display": "Display Massimo in Modalità Portatile",
-    "Display Clock": "Visualizza orologio",
+    "Max Handheld Display Hz": "Hz max in modalità portatile",
-    "Official Rating": "Valutazione ufficiale",
+    "Display Clock": "Frequenza del Display",
+    " Adjust the display voltage": "Regola la tensione del display",
+    "with caution to avoid damage": "con cautela per evitare danni",
+    "to your display panel! ": "al pannello del display!",
+    "Display Voltage": "Tensione display",
+
+    "Thermal Throttle Limit": "Limite Termico",
+    "Official Rating": "Rating Ufficiale",
     "TDP Threshold": "Soglia TDP",
     "Power": "Potenza",
-    "Thermal Throttle Limit": "Limite della valvola termica",
     "HP Mode": "Modalità HP",
+
+    "DVB Shift": "Offset DVB",
+    "SoC Max Volt": "Tensione massima SoC",
+    "Step Mode": "Modalità passo",
+    "RAM VDD2 Voltage": "Tensione RAM VDD2",
+    "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM",
+    "Voltage": "Voltaggio",
+    "RAM Frequency Editor": "Editor della frequenza RAM",
+    "Ram Max Clock": "Frequenza Massima Ram",
+    "RAM Latency Editor": "Editor della Latenza RAM",
+    "RAM Timing Reductions": "Riduzioni dei Timing della RAM",
+    "Memory Timings": "Timing di Memoria",
+    "Advanced": "Avanzato",
+    "t6 tRTW Fine Tune": "Regolazione Fine t6 tRTW",
+    "tRTW Fine Tune": "Regolazione Fine tRTW",
+    "t7 tWTR Fine Tune": "Regolazione Fine t7 tWTR",
+    "tWTR Fine Tune": "Regolazione Fine tWTR",
+    "Memory Latencies": "Latenza della Memoria",
+    "Read Latency": "Latenza di Lettura",
+    "Write Latency": "Latenza di Scrittura",
+    "High speedo needed!": "Alto Valore Speedo Necessario!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL altissimo)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL altissimo)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL altissimo)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (richiede Speedo/PLL estremo)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (richiede Speedo/PLL estremo)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (richiede Speedo/PLL estremo)",
+    "JEDEC.": "JEDEC.",
+
+    "CPU Boost Clock": "Frequenza CPU in Boost",
+    "CPU UV": "Undervolt CPU",
+    "CPU Unlock": "Sblocco della CPU",
+    "CPU VMIN": "CPU VMIN",
+    "CPU Max Voltage": "Voltaggio massimo della CPU",
+    "CPU Max Clock": "Frequenza massima della CPU",
+    "Extreme UV Table": "Tabella UV estremo",
+    "CPU UV Table": "Tabella UV della CPU",
+    "CPU Low UV": "CPU UV Bassa Frequenza",
+    "CPU High UV": "CPU UV Alta Frequenza",
+    "CPU Low VMIN": "CPU VMIN Bassa Frequenza",
+    "CPU High VMIN": "CPU VMIN Alta Frequenza",
+
+    "No Undervolt": "Nessun Undervolt",
+    "SLT Table": "Tabella SLT",
+    "HiOPT Table": "Tabella HiOPT",
+    "GPU Undervolt Table": "Tabella di Undervolt GPU",
+    "GPU Minimum Voltage": "Voltaggio Minimo della GPU",
+    "Calculate GPU Vmin": "Calcola GPU Vmin",
+    "GPU VMIN": "GPU VMIN",
+    "GPU Maximum Voltage": "Voltaggio massimo della GPU",
+    "GPU Voltage Offset": "Offset di Voltaggio della GPU",
+    "GPU DVFS Mode": "Modalità DVFS GPU",
+    "GPU DVFS Offset": "Offset DVFS della GPU",
+    "GPU Voltage Table": "Tabella delle Tensioni della GPU",
+    "GPU Custom Table (mV)": "Tabella GPU Personalizzata (mV)",
+    "Official Service": "Servizio ufficiale",
+    "96.6% limit": "Limite del 96,6%",
+    "99.7% limit": "Limite del 99,7%",
+    " Setting GPU Clocks past": "Impostare le frequenze GPU oltre",
+    "1228MHz without a proper undervolt": "1228 MHz senza undervolt appropriato",
+    "can cause degradation or damage": "può causare degrado o danni",
+    "to your console!": "alla tua console!",
+    "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT",
+    "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare",
+    "permanent damage to your Switch!": "danni permanenti alla tua Switch!",
+    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz su",
+    "SLT or HiOPT can cause ": "SLT o HiOPT possono causare",
+
     "Default (Mariko)": "Predefinito (Mariko)",
     "Default (Erista)": "Predefinito (Erista)",
     "Rating": "Valutazione",
-    "Safe Max (Mariko)": "Safe Max (Mariko)",
+    "Safe Max (Mariko)": "Massimo Sicuro (Mariko)",
-    "Safe Max (Erista)": "Safe Max (Erista)",
+    "Safe Max (Erista)": "Massimo Sicuro (Erista)",
-    "RAM VDD2 Voltage": "Tensione RAM VDD2",
+
-    "Voltage": "Voltaggio",
+    "Voltages": "Tensioni",
-    "RAM VDDQ Voltage": "Voltaggio VDDQ della RAM",
+    "RAM Voltage:": "Tensione RAM:",
-    "RAM Frequency Editor": "Editor della frequenza RAM",
+    "Display Voltage:": "Tensione display:",
-    "JEDEC.": "JEDEC.",
+    "Temperatures": "Temperature",
-    "High speedo needed!": "È necessaria l'alta velocità!",
+    "PLLX Temp:": "PLLX Temp:",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (richiede Speedo/PLL estremo)",
+    "AOTAG Temp:": "AOTAG Temp:",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (richiede Speedo/PLL estremo)",
+    "BQ24193 Temp:": "BQ24193 Temp:",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (richiede Speedo/PLL estremo)",
+    "Normal": "Normale",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (è necessario un ridicolo Speedo/PLL)",
+    "Warm": "Caldo",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (è necessario un ridicolo Speedo/PLL)",
+    "Hot": "Molto caldo",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (è necessario un ridicolo Speedo/PLL)",
+    "Overheat": "Surriscaldamento",
-    "Ram Max Clock": "Orologio Ram Max",
+    "Not Patched": "Non patchato",
-    "RAM Latency Editor": "Editor della latenza RAM",
+    "Invalid": "Non valido",
-    "RAM Timing Reductions": "Riduzioni della temporizzazione della RAM",
+    "RAM Bandwidth": "Banda RAM",
-    "Memory Timings": "Tempi di memoria",
+    "RAM BW (Peak):": "BW RAM (Picco):",
-    "Advanced": "Avanzato",
+    "RAM BW (All):": "BW RAM (Tutto):",
-    "t6 tRTW Fine Tune": "t6 tRTW Sintonia fine",
+    "RAM BW (CPU):": "BW RAM (CPU):",
-    "tRTW Fine Tune": "tRTW Sintonia fine",
+    "RAM BW (GPU):": "BW RAM (GPU):",
-    "t7 tWTR Fine Tune": "t7 tWTR Sintonia fine",
+    "Hardware Info": "Info hardware",
-    "tWTR Fine Tune": "tWTR Sintonia fine",
+    "Console Type:": "Tipo di console:",
-    "Memory Latencies": "Latenza della memoria",
+    "Speedo:": "Speedo:",
-    "Read Latency": "Leggi latenza",
+    "DRAM Module: ": "Modulo DRAM: ",
-    "Write Latency": "Scrivi latenza",
+    "Software Info": "Info software",
-    "CPU Boost Clock": "Orologio di potenziamento della CPU",
+    "KIP version:": "Versione KIP:",
-    "CPU UV": "UV della CPU",
+    "sys-dock status:": "stato di sys-dock",
-    "CPU Unlock": "Sblocco della CPU",
+    "SaltyNX status:": "Stato di SaltyNX:",
-    "CPU VMIN": "CPUVMIN",
+    "RR Display status:": "Stato del RR:",
-    "CPU Max Voltage": "Voltaggio massimo della CPU",
+    "Wafer Position:": "Posizione nel Wafer:",
-    "CPU Max Clock": "Orologio massimo della CPU",
+    "IDDQ:": "IDDQ:",
-    "Extreme UV Table": "Tavolo UV estremo",
+    "Module: ": "Modulo:",
-    "CPU UV Table": "Tabella UV della CPU",
+    "Board": "Scheda",
-    "CPU Low UV": "CPU con raggi UV bassi",
+    "Display": "Schermo",
-    "CPU High UV": "UV elevato della CPU",
+
-    "CPU Low VMIN": "VMIN CPU basso",
+    "Developers": "Sviluppatori",
-    "CPU High VMIN": "CPU alta VMIN",
+    "Contributors": "Collaboratori",
-    "No Undervolt": "Nessuna sottotensione",
+    "Testers": "Tester",
-    "SLT Table": "Tabella SLT",
+    "Translators": "Traduttori",
-    "HiOPT Table": "Tabella HiOPT",
+    "Special Thanks": "Un Ringraziamento Speciale",
-    "GPU Undervolt Table": "Tabella di sottotensione GPU",
+
-    "GPU Minimum Voltage": "Voltaggio minimo della GPU",
+    "X: %u Y: %u": "X: %u Y: %u",
-    "Calculate GPU Vmin": "Calcola GPU Vmin",
+    "%u.%u%u mV": "%u.%u%u mV",
-    "GPU VMIN": "GPUVMIN",
+    "Compiling with minimal features": "Compilazione con funzionalità minime",
-    "GPU Maximum Voltage": "Voltaggio massimo della GPU",
+    "THE BEER-WARE LICENSE": "THE BEER-WARE LICENSE"
-    "GPU Voltage Offset": "Offset di tensione della GPU",
-    "Do not override": "Non sovrascrivere",
-    "Enabled (Default)": "Abilitato (impostazione predefinita)",
-    "96.6% limit": "Limite del 96,6%.",
-    "99.7% limit": "Limite del 99,7%.",
-    "GPU Scheduling Override": "Override della pianificazione GPU",
-    "Official Service": "Servizio ufficiale",
-    "GPU DVFS Mode": "Modalità DVFS GPU",
-    "GPU DVFS Offset": "Offset DVFS della GPU",
-    "GPU Voltage Table": "Tabella delle tensioni della GPU",
-    "GPU Custom Table (mV)": "Tabella personalizzata GPU (mV)",
-    "1075MHz without UV, 1152MHz on SLT": "1075 MHz senza UV, 1152 MHz su SLT",
-    "or 1228MHz on HiOPT can cause ": "o 1228 MHz su HiOPT possono causare",
-    "permanent damage to your Switch!": "danni permanenti al tuo Switch!",
-    "921MHz without UV and 960MHz on": "921 MHz senza UV e 960 MHz attivi",
-    "SLT or HiOPT can cause ": "SLT o HiOPT possono causare"
 }

config/horizon-oc/lang/ja.json

@@ -1,52 +1,42 @@
 {
     "Information": "情報",
-    "IDDQ:": "IDQ:",
-    "Module: ": "モジュール:",
-    "sys-dock status:": "システムドックのステータス:",
-    "SaltyNX status:": "SaltyNX ステータス:",
-    "RR Display status:": "RR 表示ステータス:",
-    "Wafer Position:": "ウェーハの位置:",
-    "Credits": "クレジット",
-    "Developers": "開発者",
-    "Contributors": "貢献者",
-    "Testers": "テスター",
-    "Special Thanks": "特別な感謝の気持ち",
     "Unknown": "不明",
     "Installed": "インストール済み",
     "Not Installed": "インストールされていません",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "ビール製品ライセンス",
     "Default": "デフォルト",
     "Do Not Override": "上書きしないでください",
-    "Disabled": "障害者",
+    "Do not override": "上書きしないでください",
+    "Disabled": "無効",
     "Enabled": "有効",
-    " \\ue0e3 Reset": "\\ue0e3 リセット",
+    "Enabled (Default)": "有効 (デフォルト)",
-    "Display": "ディスプレイ",
+    "Enable": "有効にする",
-    "Application changed\\n\\n": "アプリケーションが変更されました\\n\\n",
+    "Fatal error": "致命的なエラー",
-    "The running application changed\\n\\n": "実行中のアプリケーションが変更されました\\n\\n",
-    "while editing was going on.": "編集を進めている最中でした。",
-    "Board": "理事会",
-    "%u.%u%u mV": "%u.%u%u mV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk sysmodule に接続できませんでした。\\n\\n",
     "Please make sure everything is\\n\\n": "すべてが正しいことを確認してください\\n\\n",
     "correctly installed and enabled.": "正しくインストールされ、有効になっています。",
-    "Fatal error": "致命的なエラー",
+
+    "Edit App Profile": "アプリプロファイルの編集",
+    "Edit Global Profile": "グローバルプロファイルの編集",
+    "Temporary Overrides": "一時的なオーバーライド",
     "Temporary Overrides ": "一時的なオーバーライド",
+    "  Reset": " リセット",
+    "Settings": "設定",
+    "About": "について",
+    "Credits": "クレジット",
+
+    "Application changed\\n\\n": "アプリケーションが変更されました\\n\\n",
+    "The running application changed\\n\\n": "実行中のアプリケーションが変更されました\\n\\n",
+    "while editing was going on.": "編集を進めている最中でした。",
+
     "Sleep Mode": "スリープモード",
-    "Stock": "在庫",
+    "Stock": "標準",
     "Dev OC": "開発OC",
     "Boost Mode": "ブーストモード",
     "Safe Max": "セーフマックス",
     "Unsafe Max": "危険なマックス",
     "Absolute Max": "絶対最大値",
-    "Handheld Safe Max": "手持ち金庫マックス",
+    "Handheld Safe Max": "手持ち安全マックス",
-    "Enable": "有効にする",
+
-    "Edit App Profile": "アプリプロファイルの編集",
-    "Edit Global Profile": "グローバルプロファイルの編集",
-    "Temporary Overrides": "一時的なオーバーライド",
-    "Settings": "設定",
-    "About": "について",
-    "Compiling with minimal features": "最小限の機能でコンパイルする",
     "General Settings": "一般設定",
     "Governor Settings": "ガバナーの設定",
     "Safety Settings": "安全設定",
@@ -55,41 +45,64 @@
     "CPU Settings": "CPUの設定",
     "GPU Settings": "GPU設定",
     "Display Settings": "表示設定",
+    "Experimental Settings": "実験的設定",
     "Experimental": "実験的",
+
+    " Settings marked in blue": "青色でマークされた設定",
+    "don't require a reboot to apply!": "再起動なしで適用できます！",
+    "You can also press  to show": " を押して表示することもできます",
+    "information about each setting.": "各設定の情報を。",
+
+    " Experimental Settings are incomplete ": "実験的設定は未完成です",
+    "and may not work correctly or at all!": "正しく動作しない場合があります！",
+    "Here be dragons!": "ここにドラゴンあり！",
+
+    "RAM Voltage Display Mode": "RAM電圧表示モード",
+    "RAM Display Unit": "RAM表示単位",
+    "Polling Interval": "ポーリング間隔",
+
     "GPU Scheduling Override Method": "GPU スケジューリング オーバーライド メソッド",
+    "GPU Scheduling Override": "GPU スケジュールのオーバーライド",
+    "GPU Boot Volt": "GPU起動電圧",
+    "GPU Boot Voltage": "GPU起動電圧",
+    "Memory Frequency Measurement Mode": "メモリ周波数測定モード",
+    " Overriding the charge current": "充電電流のオーバーライド",
     "can be dangerous and may cause": "危険であり、原因となる可能性があります",
     "damage to your battery or charger!": "バッテリーまたは充電器が損傷します。",
     "Charge Current Override": "充電電流オーバーライド",
-    "RAM Voltage Display Mode": "RAM電圧表示モード",
+    "Display Color Preset": "ディスプレイカラープリセット",
-    "Polling Interval": "ポーリング間隔",
+    "Basic": "ベーシック",
+    "Saturated": "鮮やか",
+    "Washed": "色あせ",
+    "Natural": "ナチュラル",
+    "Vivid": "ビビッド",
+
     "CPU Governor Minimum Frequency": "CPU ガバナの最小周波数",
+    " Usage of unsafe display": "危険なリフレッシュレートの使用",
     "refresh rates may cause stress": "リフレッシュレートがストレスを引き起こす可能性がある",
     "or damage to your display! ": "ディスプレイに損傷を与えてしまいます。",
     "Proceed at your own risk!": "自己責任で進めてください！",
     "Max Handheld Display": "最大ハンドヘルドディスプレイ",
+    "Max Handheld Display Hz": "最大ハンドヘルドHz",
     "Display Clock": "時計の表示",
+    " Adjust the display voltage": "ディスプレイ電圧を調整",
+    "with caution to avoid damage": "損傷を避けるため注意して",
+    "to your display panel! ": "ディスプレイパネルに！",
+    "Display Voltage": "ディスプレイ電圧",
+
+    "Thermal Throttle Limit": "サーマルスロットル制限",
     "Official Rating": "公式評価",
     "TDP Threshold": "TDP しきい値",
     "Power": "パワー",
-    "Thermal Throttle Limit": "サーマルスロットル制限",
     "HP Mode": "HPモード",
-    "Default (Mariko)": "デフォルト（マリコ）",
+
-    "Default (Erista)": "デフォルト（エリスタ）",
+    "DVB Shift": "DVBシフト",
-    "Rating": "評価",
+    "SoC Max Volt": "SoC最大電圧",
-    "Safe Max (Mariko)": "セーフマックス（マリコ）",
+    "Step Mode": "ステップモード",
-    "Safe Max (Erista)": "セーフマックス(エリスタ)",
     "RAM VDD2 Voltage": "RAM VDD2 電圧",
-    "Voltage": "電圧",
     "RAM VDDQ Voltage": "RAM VDDQ 電圧",
+    "Voltage": "電圧",
     "RAM Frequency Editor": "RAM周波数エディター",
-    "JEDEC.": "JEDEC。",
-    "High speedo needed!": "ハイスピードが必要です！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (エクストリーム Speedo/PLL が必要)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (エクストリーム Speedo/PLL が必要)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (エクストリーム Speedo/PLL が必要)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (とんでもない Speedo/PLL が必要)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (とんでもない Speedo/PLL が必要)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (とんでもない Speedo/PLL が必要)",
     "Ram Max Clock": "ラムマックスクロック",
     "RAM Latency Editor": "RAM レイテンシ エディター",
     "RAM Timing Reductions": "RAM タイミングの削減",
@@ -102,6 +115,15 @@
     "Memory Latencies": "メモリレイテンシ",
     "Read Latency": "読み取りレイテンシー",
     "Write Latency": "書き込みレイテンシ",
+    "High speedo needed!": "ハイスピードが必要です！",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (エクストリーム Speedo/PLL が必要)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (エクストリーム Speedo/PLL が必要)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (エクストリーム Speedo/PLL が必要)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (とんでもない Speedo/PLL が必要)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (とんでもない Speedo/PLL が必要)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (とんでもない Speedo/PLL が必要)",
+    "JEDEC.": "JEDEC。",
+
     "CPU Boost Clock": "CPUブーストクロック",
     "CPU UV": "CPU UV",
     "CPU Unlock": "CPUロック解除",
@@ -111,10 +133,11 @@
     "Extreme UV Table": "エクストリーム UV テーブル",
     "CPU UV Table": "CPU UV テーブル",
     "CPU Low UV": "CPU 低 UV",
-    "CPU High UV": "CPU 高紫外線",
+    "CPU High UV": "CPU 高 UV",
     "CPU Low VMIN": "CPU 低 VMIN",
-    "CPU High VMIN": "CPU の高い VMIN",
+    "CPU High VMIN": "CPU 高 VMIN",
-    "No Undervolt": "不足電圧なし",
+
+    "No Undervolt": "アンダーボルトなし",
     "SLT Table": "SLTテーブル",
     "HiOPT Table": "HiOPT テーブル",
     "GPU Undervolt Table": "GPUアンダーボルトテーブル",
@@ -123,19 +146,70 @@
     "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "GPU最大電圧",
     "GPU Voltage Offset": "GPU電圧オフセット",
-    "Do not override": "上書きしないでください",
-    "Enabled (Default)": "有効 (デフォルト)",
-    "96.6% limit": "96.6%制限",
-    "99.7% limit": "99.7%制限",
-    "GPU Scheduling Override": "GPU スケジュールのオーバーライド",
-    "Official Service": "正式サービス",
     "GPU DVFS Mode": "GPU DVFS モード",
     "GPU DVFS Offset": "GPU DVFS オフセット",
     "GPU Voltage Table": "GPU電圧テーブル",
     "GPU Custom Table (mV)": "GPUカスタムテーブル(mV)",
+    "Official Service": "正式サービス",
+    "96.6% limit": "96.6%制限",
+    "99.7% limit": "99.7%制限",
+    " Setting GPU Clocks past": "GPUクロックを超えて設定",
+    "1228MHz without a proper undervolt": "適切なアンダーボルトなしで1228MHz",
+    "can cause degradation or damage": "劣化や損傷を引き起こす可能性があります",
+    "to your console!": "あなたのコンソールに！",
     "1075MHz without UV, 1152MHz on SLT": "UVなしで1075MHz、SLTで1152MHz",
-    "or 1228MHz on HiOPT can cause ": "HiOPT で 1228MHz を使用すると、次のような問題が発生する可能性があります。",
+    "or 1228MHz on HiOPT can cause ": "HiOPT で 1228MHz を使用すると問題が発生する可能性があります。",
     "permanent damage to your Switch!": "Switch に永久的なダメージを与えます!",
     "921MHz without UV and 960MHz on": "921MHz（UVなし）、960MHz（UVあり）",
-    "SLT or HiOPT can cause ": "SLT または HiOPT が原因となる可能性があります"
+    "SLT or HiOPT can cause ": "SLT または HiOPT が原因となる可能性があります",
+
+    "Default (Mariko)": "デフォルト（マリコ）",
+    "Default (Erista)": "デフォルト（エリスタ）",
+    "Rating": "評価",
+    "Safe Max (Mariko)": "セーフマックス（マリコ）",
+    "Safe Max (Erista)": "セーフマックス(エリスタ)",
+
+    "Voltages": "電圧",
+    "RAM Voltage:": "RAM電圧:",
+    "Display Voltage:": "ディスプレイ電圧:",
+    "Temperatures": "温度",
+    "PLLX Temp:": "PLLX 温度:",
+    "AOTAG Temp:": "AOTAG 温度:",
+    "BQ24193 Temp:": "BQ24193 温度:",
+    "Normal": "正常",
+    "Warm": "温かい",
+    "Hot": "熱い",
+    "Overheat": "過熱",
+    "Not Patched": "パッチなし",
+    "Invalid": "無効",
+    "RAM Bandwidth": "RAM帯域幅",
+    "RAM BW (Peak):": "RAM帯域(最大):",
+    "RAM BW (All):": "RAM帯域(全):",
+    "RAM BW (CPU):": "RAM帯域(CPU):",
+    "RAM BW (GPU):": "RAM帯域(GPU):",
+    "Hardware Info": "ハードウェア情報",
+    "Console Type:": "コンソールタイプ:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "DRAMモジュール: ",
+    "Software Info": "ソフトウェア情報",
+    "KIP version:": "KIPバージョン:",
+    "sys-dock status:": "システムドックのステータス:",
+    "SaltyNX status:": "SaltyNX ステータス:",
+    "RR Display status:": "RR 表示ステータス:",
+    "Wafer Position:": "ウェーハの位置:",
+    "IDDQ:": "IDQ:",
+    "Module: ": "モジュール:",
+    "Board": "理事会",
+    "Display": "ディスプレイ",
+
+    "Developers": "開発者",
+    "Contributors": "貢献者",
+    "Testers": "テスター",
+    "Translators": "翻訳者",
+    "Special Thanks": "特別な感謝の気持ち",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "最小限の機能でコンパイルする",
+    "THE BEER-WARE LICENSE": "ビール製品ライセンス"
 }

config/horizon-oc/lang/ko.json

@@ -1,52 +1,42 @@
 {
     "Information": "정보",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "모듈:",
-    "sys-dock status:": "sys-dock 상태:",
-    "SaltyNX status:": "SaltyNX 상태:",
-    "RR Display status:": "RR 표시 상태:",
-    "Wafer Position:": "웨이퍼 위치:",
-    "Credits": "크레딧",
-    "Developers": "개발자",
-    "Contributors": "기여자",
-    "Testers": "테스터",
-    "Special Thanks": "특별한 분",
     "Unknown": "알 수 없음",
     "Installed": "설치됨",
     "Not Installed": "설치되지 않음",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "맥주 제품 라이센스",
     "Default": "기본값",
     "Do Not Override": "재정의하지 마십시오",
+    "Do not override": "재정의하지 않음",
     "Disabled": "비활성화",
     "Enabled": "활성화됨",
-    " \\ue0e3 Reset": "\\ue0e3 재설정",
+    "Enabled (Default)": "활성화됨(기본값)",
-    "Display": "디스플레이",
+    "Enable": "활성화",
-    "Application changed\\n\\n": "애플리케이션이 변경되었습니다.\\n\\n",
+    "Fatal error": "치명적인 오류",
-    "The running application changed\\n\\n": "실행 중인 애플리케이션이 변경되었습니다.\\n\\n",
-    "while editing was going on.": "편집이 진행되는 동안.",
-    "Board": "보드",
-    "%u.%u%u mV": "%u.%u%umV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "hoc-clk 시스템 모듈에 연결할 수 없습니다.\\n\\n",
     "Please make sure everything is\\n\\n": "모든 것이 올바른지 확인하십시오.\\n\\n",
     "correctly installed and enabled.": "올바르게 설치되고 활성화되었습니다.",
-    "Fatal error": "치명적인 오류",
+
+    "Edit App Profile": "앱 프로필 편집",
+    "Edit Global Profile": "글로벌 프로필 편집",
+    "Temporary Overrides": "임시 재정의",
     "Temporary Overrides ": "임시 재정의",
+    "  Reset": " 재설정",
+    "Settings": "설정",
+    "About": "소개",
+    "Credits": "크레딧",
+
+    "Application changed\\n\\n": "애플리케이션이 변경되었습니다.\\n\\n",
+    "The running application changed\\n\\n": "실행 중인 애플리케이션이 변경되었습니다.\\n\\n",
+    "while editing was going on.": "편집이 진행되는 동안.",
+
     "Sleep Mode": "절전 모드",
-    "Stock": "주식",
+    "Stock": "기본 설정",
     "Dev OC": "개발 OC",
-    "Overwrite Boost Mode": "부스트 모드 덮어쓰기",
+    "Boost Mode": "부스트 모드",
     "Safe Max": "안전함 최대값",
     "Unsafe Max": "불안정 최대값",
     "Absolute Max": "절대 최대값",
     "Handheld Safe Max": "휴대모드 안전함 최대값",
-    "Enable": "활성화",
+
-    "Edit App Profile": "앱 프로필 편집",
-    "Edit Global Profile": "글로벌 프로필 편집",
-    "Temporary Overrides": "임시 재정의",
-    "Settings": "설정",
-    "About": "소개",
-    "Compiling with minimal features": "최소한의 기능으로 컴파일하기",
     "General Settings": "일반 설정",
     "Governor Settings": "거버너 설정",
     "Safety Settings": "안전 설정",
@@ -55,41 +45,64 @@
     "CPU Settings": "CPU 설정",
     "GPU Settings": "GPU 설정",
     "Display Settings": "디스플레이 설정",
+    "Experimental Settings": "실험적 설정",
     "Experimental": "실험적",
+
+    " Settings marked in blue": "파란색으로 표시된 설정은",
+    "don't require a reboot to apply!": "재부팅 없이 적용됩니다!",
+    "You can also press  to show": "을 눌러 표시할 수도 있습니다",
+    "information about each setting.": "각 설정에 대한 정보를.",
+
+    " Experimental Settings are incomplete ": "실험적 설정은 미완성입니다",
+    "and may not work correctly or at all!": "올바르게 작동하지 않을 수 있습니다!",
+    "Here be dragons!": "여기에 드래곤이 있습니다!",
+
+    "RAM Voltage Display Mode": "RAM 전압 표시 모드",
+    "RAM Display Unit": "RAM 표시 단위",
+    "Polling Interval": "폴링 간격",
+
     "GPU Scheduling Override Method": "GPU 스케줄링 재정의 방법",
+    "GPU Scheduling Override": "GPU 스케줄링 재정의",
+    "GPU Boot Volt": "GPU 부팅 전압",
+    "GPU Boot Voltage": "GPU 부팅 전압",
+    "Memory Frequency Measurement Mode": "메모리 주파수 측정 모드",
+    " Overriding the charge current": "충전 전류 오버라이드",
     "can be dangerous and may cause": "위험할 수 있고 원인이 될 수 있습니다.",
     "damage to your battery or charger!": "배터리나 충전기가 손상되었습니다!",
     "Charge Current Override": "충전 전류 오버라이드",
-    "RAM Voltage Display Mode": "RAM 전압 표시 모드",
+    "Display Color Preset": "디스플레이 색상 프리셋",
-    "Polling Interval": "폴링 간격",
+    "Basic": "기본",
+    "Saturated": "채도 높음",
+    "Washed": "연한색",
+    "Natural": "자연스러움",
+    "Vivid": "선명함",
+
     "CPU Governor Minimum Frequency": "CPU 거버너 최소 주파수",
+    " Usage of unsafe display": "안전하지 않은 주사율 사용",
     "refresh rates may cause stress": "디스플레이 주사율 빈도 변경은",
     "or damage to your display! ": "기기에 손상이 발생될 수 있습니다!",
     "Proceed at your own risk!": "책임하에 주의해서 사용하십시오!",
     "Max Handheld Display": "최대 휴대용 디스플레이",
+    "Max Handheld Display Hz": "최대 휴대용 Hz",
     "Display Clock": "디스플레이 클럭",
+    " Adjust the display voltage": "디스플레이 전압 조정",
+    "with caution to avoid damage": "손상을 피하기 위해 주의하여",
+    "to your display panel! ": "디스플레이 패널에!",
+    "Display Voltage": "디스플레이 전압",
+
+    "Thermal Throttle Limit": "열 스로틀 한계",
     "Official Rating": "공식 등급",
     "TDP Threshold": "TDP 임계값",
     "Power": "힘",
-    "Thermal Throttle Limit": "열 스로틀 한계",
     "HP Mode": "HP 모드",
-    "Default (Mariko)": "기본값(마리코)",
+
-    "Default (Erista)": "기본값(에리스타)",
+    "DVB Shift": "DVB 시프트",
-    "Rating": "표준값",
+    "SoC Max Volt": "SoC 최대 전압",
-    "Safe Max (Mariko)": "안전함 최대치(마리코)",
+    "Step Mode": "스텝 모드",
-    "Safe Max (Erista)": "안전함 최대치(에리스타)",
     "RAM VDD2 Voltage": "RAM VDD2 전압",
-    "Voltage": "전압",
     "RAM VDDQ Voltage": "RAM VDDQ 전압",
+    "Voltage": "전압",
     "RAM Frequency Editor": "RAM 주파수 편집기",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "높은 스피도값이 필요합니다!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz(극단적인 Speedo/PLL 필요)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz(극단적인 Speedo/PLL 필요)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz(극단적인 Speedo/PLL 필요)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (말도 안 되는 Speedo/PLL 필요)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz(터무니없는 Speedo/PLL 필요)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz(터무니없는 Speedo/PLL 필요)",
     "Ram Max Clock": "RAM 최대 클럭",
     "RAM Latency Editor": "RAM 지연 시간 편집기",
     "RAM Timing Reductions": "RAM 타이밍 편집기",
@@ -102,6 +115,15 @@
     "Memory Latencies": "메모리 지연 시간",
     "Read Latency": "읽기 지연 시간",
     "Write Latency": "쓰기 지연 시간",
+    "High speedo needed!": "높은 스피도값이 필요합니다!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz(극단적인 Speedo/PLL 필요)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz(극단적인 Speedo/PLL 필요)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz(극단적인 Speedo/PLL 필요)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz(터무니없는 Speedo/PLL 필요)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz(터무니없는 Speedo/PLL 필요)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz(터무니없는 Speedo/PLL 필요)",
+    "JEDEC.": "JEDEC.",
+
     "CPU Boost Clock": "CPU 부스트 클럭",
     "CPU UV": "CPU 언더볼트",
     "CPU Unlock": "CPU 잠금 해제",
@@ -114,6 +136,7 @@
     "CPU High UV": "CPU 고주파 언더볼트",
     "CPU Low VMIN": "CPU 저주파 최소 전압",
     "CPU High VMIN": "CPU 고주파 최소 전압",
+
     "No Undervolt": "언더볼트 없음",
     "SLT Table": "SLT 테이블",
     "HiOPT Table": "HiOPT 테이블",
@@ -123,19 +146,70 @@
     "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "GPU 최대 전압",
     "GPU Voltage Offset": "GPU 전압 오프셋",
-    "Do not override": "재정의하지 않음",
-    "Enabled (Default)": "활성화됨(기본값)",
-    "96.6% limit": "96.6% 한도",
-    "99.7% limit": "99.7% 한도",
-    "GPU Scheduling Override": "GPU 스케줄링 재정의",
-    "Official Service": "공식 서비스",
     "GPU DVFS Mode": "GPU DVFS 모드",
     "GPU DVFS Offset": "GPU DVFS 오프셋",
     "GPU Voltage Table": "GPU 전압 테이블",
     "GPU Custom Table (mV)": "GPU 사용자 정의 테이블(mV)",
+    "Official Service": "공식 서비스",
+    "96.6% limit": "96.6% 한도",
+    "99.7% limit": "99.7% 한도",
+    " Setting GPU Clocks past": "GPU 클럭을 초과 설정",
+    "1228MHz without a proper undervolt": "적절한 언더볼트 없이 1228MHz",
+    "can cause degradation or damage": "열화 또는 손상을 유발할 수 있습니다",
+    "to your console!": "콘솔에!",
     "1075MHz without UV, 1152MHz on SLT": "UV 없이 1075MHz, SLT에서 1152MHz",
     "or 1228MHz on HiOPT can cause ": "또는 HiOPT에서 1228MHz를 사용하면",
     "permanent damage to your Switch!": "스위치가 영구적으로 손상될 수 있습니다!",
     "921MHz without UV and 960MHz on": "UV가 없는 경우 921MHz, 켜진 경우에는 960MHz",
-    "SLT or HiOPT can cause ": "SLT 또는 HiOPT는 다음을 유발할 수 있습니다."
+    "SLT or HiOPT can cause ": "SLT 또는 HiOPT는 다음을 유발할 수 있습니다.",
+
+    "Default (Mariko)": "기본값(마리코)",
+    "Default (Erista)": "기본값(에리스타)",
+    "Rating": "표준값",
+    "Safe Max (Mariko)": "안전함 최대치(마리코)",
+    "Safe Max (Erista)": "안전함 최대치(에리스타)",
+
+    "Voltages": "전압",
+    "RAM Voltage:": "RAM 전압:",
+    "Display Voltage:": "디스플레이 전압:",
+    "Temperatures": "온도",
+    "PLLX Temp:": "PLLX 온도:",
+    "AOTAG Temp:": "AOTAG 온도:",
+    "BQ24193 Temp:": "BQ24193 온도:",
+    "Normal": "정상",
+    "Warm": "따뜻함",
+    "Hot": "뜨거움",
+    "Overheat": "과열",
+    "Not Patched": "패치 안 됨",
+    "Invalid": "유효하지 않음",
+    "RAM Bandwidth": "RAM 대역폭",
+    "RAM BW (Peak):": "RAM 대역폭 (최대):",
+    "RAM BW (All):": "RAM 대역폭 (전체):",
+    "RAM BW (CPU):": "RAM 대역폭 (CPU):",
+    "RAM BW (GPU):": "RAM 대역폭 (GPU):",
+    "Hardware Info": "하드웨어 정보",
+    "Console Type:": "콘솔 유형:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "DRAM 모듈: ",
+    "Software Info": "소프트웨어 정보",
+    "KIP version:": "KIP 버전:",
+    "sys-dock status:": "sys-dock 상태:",
+    "SaltyNX status:": "SaltyNX 상태:",
+    "RR Display status:": "RR 표시 상태:",
+    "Wafer Position:": "웨이퍼 위치:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "모듈:",
+    "Board": "보드",
+    "Display": "디스플레이",
+
+    "Developers": "개발자",
+    "Contributors": "기여자",
+    "Testers": "테스터",
+    "Translators": "번역자",
+    "Special Thanks": "특별한 분",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%umV",
+    "Compiling with minimal features": "최소한의 기능으로 컴파일하기",
+    "THE BEER-WARE LICENSE": "맥주 제품 라이센스"
 }

config/horizon-oc/lang/nl.json

@@ -1,52 +1,42 @@
 {
     "Information": "Informatie",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "module:",
-    "sys-dock status:": "sys-dock-status:",
-    "SaltyNX status:": "SaltyNX-status:",
-    "RR Display status:": "RR Weergavestatus:",
-    "Wafer Position:": "Waferpositie:",
-    "Credits": "Kredieten",
-    "Developers": "Ontwikkelaars",
-    "Contributors": "Bijdragers",
-    "Testers": "Testers",
-    "Special Thanks": "Speciale dank",
     "Unknown": "Onbekend",
     "Installed": "Geïnstalleerd",
     "Not Installed": "Niet geïnstalleerd",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "DE LICENTIE VOOR BIERWAREN",
     "Default": "Standaard",
     "Do Not Override": "Niet overschrijven",
+    "Do not override": "Niet overschrijven",
     "Disabled": "Uitgeschakeld",
     "Enabled": "Ingeschakeld",
-    " \\ue0e3 Reset": "\\ue0e3 Opnieuw instellen",
+    "Enabled (Default)": "Ingeschakeld (standaard)",
-    "Display": "Weergave",
+    "Enable": "Inschakelen",
-    "Application changed\\n\\n": "Applicatie gewijzigd\\n\\n",
+    "Fatal error": "Fatale fout",
-    "The running application changed\\n\\n": "De actieve applicatie is gewijzigd\\n\\n",
-    "while editing was going on.": "terwijl er werd bewerkt.",
-    "Board": "Bord",
-    "%u.%u%u mV": "%u.%u%u mV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "Kan geen verbinding maken met hoc-clk sysmodule.\\n\\n",
     "Please make sure everything is\\n\\n": "Zorg ervoor dat alles in orde is\\n\\n",
     "correctly installed and enabled.": "correct geïnstalleerd en ingeschakeld.",
-    "Fatal error": "Fatale fout",
+
+    "Edit App Profile": "App-profiel bewerken",
+    "Edit Global Profile": "Globaal profiel bewerken",
+    "Temporary Overrides": "Tijdelijke overschrijvingen",
     "Temporary Overrides ": "Tijdelijke overschrijvingen",
+    "  Reset": " Opnieuw instellen",
+    "Settings": "Instellingen",
+    "About": "Over",
+    "Credits": "Kredieten",
+
+    "Application changed\\n\\n": "Applicatie gewijzigd\\n\\n",
+    "The running application changed\\n\\n": "De actieve applicatie is gewijzigd\\n\\n",
+    "while editing was going on.": "terwijl er werd bewerkt.",
+
     "Sleep Mode": "Slaapmodus",
     "Stock": "Voorraad",
     "Dev OC": "Ontwikkelaar OC",
     "Boost Mode": "Boost-modus",
     "Safe Max": "Veilig Max",
-    "Unsafe Max": "OnveiligMax",
+    "Unsafe Max": "Onveilig Max",
     "Absolute Max": "Absoluut Max",
-    "Handheld Safe Max": "Handkluis Max",
+    "Handheld Safe Max": "Handheld Veilig Max",
-    "Enable": "Inschakelen",
+
-    "Edit App Profile": "App-profiel bewerken",
-    "Edit Global Profile": "Globaal profiel bewerken",
-    "Temporary Overrides": "Tijdelijke overschrijvingen",
-    "Settings": "Instellingen",
-    "About": "Over",
-    "Compiling with minimal features": "Compileren met minimale functies",
     "General Settings": "Algemene instellingen",
     "Governor Settings": "Gouverneur instellingen",
     "Safety Settings": "Veiligheidsinstellingen",
@@ -55,41 +45,64 @@
     "CPU Settings": "CPU-instellingen",
     "GPU Settings": "GPU-instellingen",
     "Display Settings": "Weergave-instellingen",
+    "Experimental Settings": "Experimentele instellingen",
     "Experimental": "Experimenteel",
+
+    " Settings marked in blue": "In blauw gemarkeerde instellingen",
+    "don't require a reboot to apply!": "vereisen geen herstart om toe te passen!",
+    "You can also press  to show": "Druk ook op  om te tonen",
+    "information about each setting.": "informatie over elke instelling.",
+
+    " Experimental Settings are incomplete ": "Experimentele instellingen zijn onvolledig",
+    "and may not work correctly or at all!": "en werken mogelijk helemaal niet!",
+    "Here be dragons!": "Hier zijn draken!",
+
+    "RAM Voltage Display Mode": "Weergavemodus RAM-spanning",
+    "RAM Display Unit": "RAM-weergave-eenheid",
+    "Polling Interval": "Polling-interval",
+
     "GPU Scheduling Override Method": "Methode voor het overschrijven van GPU-planning",
+    "GPU Scheduling Override": "GPU-planning negeren",
+    "GPU Boot Volt": "GPU opstartspanning",
+    "GPU Boot Voltage": "GPU opstartspanning",
+    "Memory Frequency Measurement Mode": "Geheugenfrequentie-meetmodus",
+    " Overriding the charge current": "Het overschrijven van de laadstroom",
     "can be dangerous and may cause": "kan gevaarlijk zijn en kan veroorzaken",
     "damage to your battery or charger!": "schade aan uw accu of lader!",
     "Charge Current Override": "Laadstroom overschrijven",
-    "RAM Voltage Display Mode": "Weergavemodus RAM-spanning",
+    "Display Color Preset": "Kleurvoorinstelling",
-    "Polling Interval": "Polling-interval",
+    "Basic": "Basis",
+    "Saturated": "Verzadigd",
+    "Washed": "Uitgewassen",
+    "Natural": "Natuurlijk",
+    "Vivid": "Levendig",
+
     "CPU Governor Minimum Frequency": "Minimale frequentie CPU-regelaar",
+    " Usage of unsafe display": "Het gebruik van onveilige schermfrequenties",
     "refresh rates may cause stress": "vernieuwingsfrequenties kunnen stress veroorzaken",
     "or damage to your display! ": "of schade aan uw display!",
     "Proceed at your own risk!": "Ga verder op eigen risico!",
     "Max Handheld Display": "Maximaal handheld-display",
+    "Max Handheld Display Hz": "Max handheld Hz",
     "Display Clock": "Klok weergeven",
+    " Adjust the display voltage": "Pas de displayspanning aan",
+    "with caution to avoid damage": "met voorzichtigheid om schade te vermijden",
+    "to your display panel! ": "van uw beeldschermpaneel!",
+    "Display Voltage": "Displayspanning",
+
+    "Thermal Throttle Limit": "Thermische gaslimiet",
     "Official Rating": "Officiële beoordeling",
     "TDP Threshold": "TDP-drempel",
     "Power": "Macht",
-    "Thermal Throttle Limit": "Thermische gaslimiet",
     "HP Mode": "HP-modus",
-    "Default (Mariko)": "Standaard (Mariko)",
+
-    "Default (Erista)": "Standaard (Erista)",
+    "DVB Shift": "DVB-verschuiving",
-    "Rating": "Beoordeling",
+    "SoC Max Volt": "SoC max spanning",
-    "Safe Max (Mariko)": "Veilig Max (Mariko)",
+    "Step Mode": "Stappmodus",
-    "Safe Max (Erista)": "Veilige Max (Erista)",
     "RAM VDD2 Voltage": "RAM VDD2-spanning",
-    "Voltage": "Spanning",
     "RAM VDDQ Voltage": "RAM VDDQ-spanning",
+    "Voltage": "Spanning",
     "RAM Frequency Editor": "RAM-frequentie-editor",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Hoge snelheid nodig!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (vereist extreme snelheidsmeter/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (vereist extreme snelheidsmeter/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (vereist extreme snelheidsmeter/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (heeft een belachelijke snelheidsmeter/PLL nodig)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (heeft een belachelijke snelheidsmeter/PLL nodig)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (heeft een belachelijke snelheidsmeter/PLL nodig)",
     "Ram Max Clock": "Ram Max-klok",
     "RAM Latency Editor": "RAM-latentie-editor",
     "RAM Timing Reductions": "RAM-timingreducties",
@@ -102,6 +115,15 @@
     "Memory Latencies": "Geheugenlatenties",
     "Read Latency": "Lees Latentie",
     "Write Latency": "Schrijf latentie",
+    "High speedo needed!": "Hoge Speedo-waarde nodig!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (vereist extreme Speedo/PLL)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (vereist extreme Speedo/PLL)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (vereist extreme Speedo/PLL)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (heeft een belachelijke Speedo/PLL nodig)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (heeft een belachelijke Speedo/PLL nodig)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (heeft een belachelijke Speedo/PLL nodig)",
+    "JEDEC.": "JEDEC.",
+
     "CPU Boost Clock": "CPU-boostklok",
     "CPU UV": "CPU-UV",
     "CPU Unlock": "CPU-ontgrendeling",
@@ -114,6 +136,7 @@
     "CPU High UV": "CPU Hoge UV",
     "CPU Low VMIN": "CPU Lage VMIN",
     "CPU High VMIN": "CPU Hoge VMIN",
+
     "No Undervolt": "Geen ondervolt",
     "SLT Table": "SLT-tabel",
     "HiOPT Table": "HiOPT-tabel",
@@ -123,19 +146,70 @@
     "GPU VMIN": "GPU-VMIN",
     "GPU Maximum Voltage": "GPU maximale spanning",
     "GPU Voltage Offset": "GPU-spanningsoffset",
-    "Do not override": "Niet overschrijven",
-    "Enabled (Default)": "Ingeschakeld (standaard)",
-    "96.6% limit": "96,6% limiet",
-    "99.7% limit": "99,7% limiet",
-    "GPU Scheduling Override": "GPU-planning negeren",
-    "Official Service": "Officiële dienst",
     "GPU DVFS Mode": "GPU DVFS-modus",
     "GPU DVFS Offset": "GPU DVFS-offset",
     "GPU Voltage Table": "GPU-spanningstabel",
     "GPU Custom Table (mV)": "Aangepaste GPU-tabel (mV)",
+    "Official Service": "Officiële dienst",
+    "96.6% limit": "96,6% limiet",
+    "99.7% limit": "99,7% limiet",
+    " Setting GPU Clocks past": "GPU-klokken instellen voorbij",
+    "1228MHz without a proper undervolt": "1228MHz zonder goede onderspanning",
+    "can cause degradation or damage": "kan degradatie of schade veroorzaken",
+    "to your console!": "aan uw console!",
     "1075MHz without UV, 1152MHz on SLT": "1075MHz zonder UV, 1152MHz op SLT",
     "or 1228MHz on HiOPT can cause ": "of 1228MHz op HiOPT kan dit veroorzaken",
     "permanent damage to your Switch!": "blijvende schade aan uw Switch!",
     "921MHz without UV and 960MHz on": "921MHz zonder UV en 960MHz aan",
-    "SLT or HiOPT can cause ": "SLT of HiOPT kunnen dit veroorzaken"
+    "SLT or HiOPT can cause ": "SLT of HiOPT kunnen dit veroorzaken",
+
+    "Default (Mariko)": "Standaard (Mariko)",
+    "Default (Erista)": "Standaard (Erista)",
+    "Rating": "Beoordeling",
+    "Safe Max (Mariko)": "Veilig Max (Mariko)",
+    "Safe Max (Erista)": "Veilige Max (Erista)",
+
+    "Voltages": "Spanningen",
+    "RAM Voltage:": "RAM-spanning:",
+    "Display Voltage:": "Displayspanning:",
+    "Temperatures": "Temperaturen",
+    "PLLX Temp:": "PLLX Temp:",
+    "AOTAG Temp:": "AOTAG Temp:",
+    "BQ24193 Temp:": "BQ24193 Temp:",
+    "Normal": "Normaal",
+    "Warm": "Warm",
+    "Hot": "Heet",
+    "Overheat": "Oververhitting",
+    "Not Patched": "Niet gepatcht",
+    "Invalid": "Ongeldig",
+    "RAM Bandwidth": "RAM-bandbreedte",
+    "RAM BW (Peak):": "RAM-BW (Piek):",
+    "RAM BW (All):": "RAM-BW (Alle):",
+    "RAM BW (CPU):": "RAM-BW (CPU):",
+    "RAM BW (GPU):": "RAM-BW (GPU):",
+    "Hardware Info": "Hardware-info",
+    "Console Type:": "Consoletype:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "DRAM-module: ",
+    "Software Info": "Software-info",
+    "KIP version:": "KIP-versie:",
+    "sys-dock status:": "sys-dock-status:",
+    "SaltyNX status:": "SaltyNX-status:",
+    "RR Display status:": "RR Weergavestatus:",
+    "Wafer Position:": "Waferpositie:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "module:",
+    "Board": "Bord",
+    "Display": "Weergave",
+
+    "Developers": "Ontwikkelaars",
+    "Contributors": "Bijdragers",
+    "Testers": "Testers",
+    "Translators": "Vertalers",
+    "Special Thanks": "Speciale dank",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "Compileren met minimale functies",
+    "THE BEER-WARE LICENSE": "DE LICENTIE VOOR BIERWAREN"
 }

config/horizon-oc/lang/pl.json

@@ -1,37 +1,33 @@
 {
     "Information": "Informacje",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Moduł:",
-    "sys-dock status:": "stan sys-dock:",
-    "SaltyNX status:": "Stan SaltyNX:",
-    "RR Display status:": "Stan wyświetlacza:",
-    "Wafer Position:": "Pozycja wafla:",
-    "Credits": "Kredyty",
-    "Developers": "Deweloperzy",
-    "Contributors": "Współautorzy",
-    "Testers": "Testery",
-    "Special Thanks": "Specjalne podziękowania",
     "Unknown": "Nieznany",
     "Installed": "Zainstalowany",
     "Not Installed": "Nie zainstalowano",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "LICENCJA NA WYROBY PIWNE",
     "Default": "Domyślne",
     "Do Not Override": "Nie zastępuj",
-    "Disabled": "Niepełnosprawny",
+    "Do not override": "Nie zastępuj",
+    "Disabled": "Wyłączony",
     "Enabled": "Włączone",
-    " \\ue0e3 Reset": "\\ue0e3 Zresetuj",
+    "Enabled (Default)": "Włączone (domyślnie)",
-    "Display": "Wyświetlacz",
+    "Enable": "Włącz",
-    "Application changed\\n\\n": "Aplikacja została zmieniona\\n\\n",
+    "Fatal error": "Fatalny błąd",
-    "The running application changed\\n\\n": "Działająca aplikacja została zmieniona\\n\\n",
-    "while editing was going on.": "podczas gdy edycja była w toku.",
-    "Board": "Deska",
-    "%u.%u%u mV": "%u.%u%u mV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "Nie można połączyć się z modułem sysmodule hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Upewnij się, że wszystko jest\\n\\n",
     "correctly installed and enabled.": "poprawnie zainstalowany i włączony.",
-    "Fatal error": "Fatalny błąd",
+
+    "Edit App Profile": "Edytuj profil aplikacji",
+    "Edit Global Profile": "Edytuj profil globalny",
+    "Temporary Overrides": "Tymczasowe nadpisania",
     "Temporary Overrides ": "Tymczasowe nadpisania",
+    "  Reset": " Zresetuj",
+    "Settings": "Ustawienia",
+    "About": "O",
+    "Credits": "Kredyty",
+
+    "Application changed\\n\\n": "Aplikacja została zmieniona\\n\\n",
+    "The running application changed\\n\\n": "Działająca aplikacja została zmieniona\\n\\n",
+    "while editing was going on.": "podczas gdy edycja była w toku.",
+
     "Sleep Mode": "Tryb uśpienia",
     "Stock": "Zapas",
     "Dev OC": "Dev OC",
@@ -39,14 +35,8 @@
     "Safe Max": "Bezpieczny maks",
     "Unsafe Max": "Niebezpieczny maks",
     "Absolute Max": "Absolutny maks",
-    "Handheld Safe Max": "Sejf ręczny Max",
+    "Handheld Safe Max": "Przenośny bezpieczny maks",
-    "Enable": "Włącz",
+
-    "Edit App Profile": "Edytuj profil aplikacji",
-    "Edit Global Profile": "Edytuj profil globalny",
-    "Temporary Overrides": "Tymczasowe nadpisania",
-    "Settings": "Ustawienia",
-    "About": "O",
-    "Compiling with minimal features": "Kompilacja z minimalnymi funkcjami",
     "General Settings": "Ustawienia ogólne",
     "Governor Settings": "Ustawienia gubernatora",
     "Safety Settings": "Ustawienia bezpieczeństwa",
@@ -55,41 +45,64 @@
     "CPU Settings": "Ustawienia procesora",
     "GPU Settings": "Ustawienia GPU",
     "Display Settings": "Ustawienia wyświetlania",
+    "Experimental Settings": "Ustawienia eksperymentalne",
     "Experimental": "Eksperymentalny",
+
+    " Settings marked in blue": "Ustawienia zaznaczone na niebiesko",
+    "don't require a reboot to apply!": "nie wymagają ponownego uruchomienia!",
+    "You can also press  to show": "Możesz też wcisnąć  aby wyświetlić",
+    "information about each setting.": "informacje o każdym ustawieniu.",
+
+    " Experimental Settings are incomplete ": "Ustawienia eksperymentalne są niekompletne",
+    "and may not work correctly or at all!": "i mogą w ogóle nie działać!",
+    "Here be dragons!": "Tu są smoki!",
+
+    "RAM Voltage Display Mode": "Tryb wyświetlania napięcia RAM",
+    "RAM Display Unit": "Jednostka wyświetlania RAM",
+    "Polling Interval": "Interwał odpytywania",
+
     "GPU Scheduling Override Method": "Metoda obejścia harmonogramu GPU",
+    "GPU Scheduling Override": "Zastąpienie harmonogramu GPU",
+    "GPU Boot Volt": "Napięcie startowe GPU",
+    "GPU Boot Voltage": "Napięcie startowe GPU",
+    "Memory Frequency Measurement Mode": "Tryb pomiaru częstotliwości pamięci",
+    " Overriding the charge current": "Nadpisanie prądu ładowania",
     "can be dangerous and may cause": "może być niebezpieczne i powodować",
     "damage to your battery or charger!": "uszkodzenie akumulatora lub ładowarki!",
     "Charge Current Override": "Obejście prądu ładowania",
-    "RAM Voltage Display Mode": "Tryb wyświetlania napięcia RAM",
+    "Display Color Preset": "Preset koloru",
-    "Polling Interval": "Interwał odpytywania",
+    "Basic": "Podstawowy",
+    "Saturated": "Nasycony",
+    "Washed": "Wyblakły",
+    "Natural": "Naturalny",
+    "Vivid": "Żywy",
+
     "CPU Governor Minimum Frequency": "Minimalna częstotliwość regulatora procesora",
+    " Usage of unsafe display": "Użycie niebezpiecznych częstotliwości",
     "refresh rates may cause stress": "częstotliwości odświeżania mogą powodować stres",
     "or damage to your display! ": "lub uszkodzenie wyświetlacza!",
     "Proceed at your own risk!": "Postępuj na własne ryzyko!",
     "Max Handheld Display": "Maksymalny wyświetlacz ręczny",
+    "Max Handheld Display Hz": "Maks. Hz w trybie przenośnym",
     "Display Clock": "Wyświetl zegar",
+    " Adjust the display voltage": "Dostosuj napięcie wyświetlacza",
+    "with caution to avoid damage": "ostrożnie, aby uniknąć uszkodzeń",
+    "to your display panel! ": "panelu wyświetlacza!",
+    "Display Voltage": "Napięcie wyświetlacza",
+
+    "Thermal Throttle Limit": "Limit przepustnicy termicznej",
     "Official Rating": "Oficjalna ocena",
     "TDP Threshold": "Próg TDP",
     "Power": "Moc",
-    "Thermal Throttle Limit": "Limit przepustnicy termicznej",
     "HP Mode": "Tryb HP",
-    "Default (Mariko)": "Domyślny (Mariko)",
+
-    "Default (Erista)": "Domyślny (Erista)",
+    "DVB Shift": "Przesunięcie DVB",
-    "Rating": "Ocena",
+    "SoC Max Volt": "Maks. napięcie SoC",
-    "Safe Max (Mariko)": "Bezpieczny Max (Mariko)",
+    "Step Mode": "Tryb krokowy",
-    "Safe Max (Erista)": "Bezpieczny Max (Erista)",
     "RAM VDD2 Voltage": "Napięcie pamięci RAM VDD2",
-    "Voltage": "Napięcie",
     "RAM VDDQ Voltage": "Napięcie RAM VDDQ",
+    "Voltage": "Napięcie",
     "RAM Frequency Editor": "Edytor częstotliwości RAM",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Potrzebna duża prędkość!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (wymaga ekstremalnego Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (potrzebuje śmiesznego Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (potrzebuje śmiesznego Speedo/PLL)",
     "Ram Max Clock": "Zegar Ram Max",
     "RAM Latency Editor": "Edytor opóźnień pamięci RAM",
     "RAM Timing Reductions": "Zmniejszenie taktowania pamięci RAM",
@@ -100,8 +113,17 @@
     "t7 tWTR Fine Tune": "t7 tWTR Dostosuj",
     "tWTR Fine Tune": "tWTR Dostosuj",
     "Memory Latencies": "Opóźnienia pamięci",
-    "Read Latency": "Przeczytaj Opóźnienie",
+    "Read Latency": "Opóźnienie odczytu",
     "Write Latency": "Opóźnienie zapisu",
+    "High speedo needed!": "Potrzebna duża wartość Speedo!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (wymaga ekstremalnego Speedo/PLL)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (wymaga ekstremalnego Speedo/PLL)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (wymaga ekstremalnego Speedo/PLL)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (potrzebuje śmiesznego Speedo/PLL)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (potrzebuje śmiesznego Speedo/PLL)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (potrzebuje śmiesznego Speedo/PLL)",
+    "JEDEC.": "JEDEC.",
+
     "CPU Boost Clock": "Zegar wzmocnienia procesora",
     "CPU UV": "Procesor UV",
     "CPU Unlock": "Odblokowanie procesora",
@@ -114,6 +136,7 @@
     "CPU High UV": "Wysokie promieniowanie UV procesora",
     "CPU Low VMIN": "Niski poziom VMIN procesora",
     "CPU High VMIN": "Wysoki poziom VMIN procesora",
+
     "No Undervolt": "Brak Undervolta",
     "SLT Table": "Stół SLT",
     "HiOPT Table": "Stół HiOPT",
@@ -123,19 +146,70 @@
     "GPU VMIN": "VMIN GPU",
     "GPU Maximum Voltage": "Maksymalne napięcie procesora graficznego",
     "GPU Voltage Offset": "Przesunięcie napięcia GPU",
-    "Do not override": "Nie zastępuj",
-    "Enabled (Default)": "Włączone (domyślnie)",
-    "96.6% limit": "Limit 96,6%.",
-    "99.7% limit": "Limit 99,7%.",
-    "GPU Scheduling Override": "Zastąpienie harmonogramu GPU",
-    "Official Service": "Oficjalny serwis",
     "GPU DVFS Mode": "Tryb DVFS procesora graficznego",
     "GPU DVFS Offset": "Przesunięcie DVFS GPU",
     "GPU Voltage Table": "Tabela napięć GPU",
     "GPU Custom Table (mV)": "Tabela niestandardowa GPU (mV)",
+    "Official Service": "Oficjalny serwis",
+    "96.6% limit": "Limit 96,6%",
+    "99.7% limit": "Limit 99,7%",
+    " Setting GPU Clocks past": "Ustawianie zegarów GPU powyżej",
+    "1228MHz without a proper undervolt": "1228 MHz bez odpowiedniego undervolta",
+    "can cause degradation or damage": "może powodować degradację lub uszkodzenia",
+    "to your console!": "Twoją konsolę!",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz bez UV, 1152 MHz na SLT",
     "or 1228MHz on HiOPT can cause ": "lub 1228 MHz na HiOPT może powodować",
     "permanent damage to your Switch!": "trwałe uszkodzenie Switcha!",
     "921MHz without UV and 960MHz on": "921 MHz bez UV i 960 MHz włączone",
-    "SLT or HiOPT can cause ": "Przyczyną mogą być SLT lub HiOPT"
+    "SLT or HiOPT can cause ": "Przyczyną mogą być SLT lub HiOPT",
+
+    "Default (Mariko)": "Domyślny (Mariko)",
+    "Default (Erista)": "Domyślny (Erista)",
+    "Rating": "Ocena",
+    "Safe Max (Mariko)": "Bezpieczny Max (Mariko)",
+    "Safe Max (Erista)": "Bezpieczny Max (Erista)",
+
+    "Voltages": "Napięcia",
+    "RAM Voltage:": "Napięcie RAM:",
+    "Display Voltage:": "Napięcie wyświetlacza:",
+    "Temperatures": "Temperatury",
+    "PLLX Temp:": "PLLX Temp:",
+    "AOTAG Temp:": "AOTAG Temp:",
+    "BQ24193 Temp:": "BQ24193 Temp:",
+    "Normal": "Normalny",
+    "Warm": "Ciepły",
+    "Hot": "Gorący",
+    "Overheat": "Przegrzanie",
+    "Not Patched": "Bez patcha",
+    "Invalid": "Nieprawidłowy",
+    "RAM Bandwidth": "Przepustowość RAM",
+    "RAM BW (Peak):": "BW RAM (Maks.):",
+    "RAM BW (All):": "BW RAM (Wszys.):",
+    "RAM BW (CPU):": "BW RAM (CPU):",
+    "RAM BW (GPU):": "BW RAM (GPU):",
+    "Hardware Info": "Info o sprzęcie",
+    "Console Type:": "Typ konsoli:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "Moduł DRAM: ",
+    "Software Info": "Info o oprogramowaniu",
+    "KIP version:": "Wersja KIP:",
+    "sys-dock status:": "stan sys-dock:",
+    "SaltyNX status:": "Stan SaltyNX:",
+    "RR Display status:": "Stan wyświetlacza:",
+    "Wafer Position:": "Pozycja wafla:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "Moduł:",
+    "Board": "Deska",
+    "Display": "Wyświetlacz",
+
+    "Developers": "Deweloperzy",
+    "Contributors": "Współautorzy",
+    "Testers": "Testery",
+    "Translators": "Tłumacze",
+    "Special Thanks": "Specjalne podziękowania",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "Kompilacja z minimalnymi funkcjami",
+    "THE BEER-WARE LICENSE": "LICENCJA NA WYROBY PIWNE"
 }

config/horizon-oc/lang/pt.json

@@ -1,52 +1,42 @@
 {
     "Information": "Informação",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Módulo:",
-    "sys-dock status:": "status do dock do sistema:",
-    "SaltyNX status:": "Status do SaltyNX:",
-    "RR Display status:": "Status de exibição do RR:",
-    "Wafer Position:": "Posição da bolacha:",
-    "Credits": "Créditos",
-    "Developers": "Desenvolvedores",
-    "Contributors": "Colaboradores",
-    "Testers": "Testadores",
-    "Special Thanks": "Agradecimentos especiais",
     "Unknown": "Desconhecido",
     "Installed": "Instalado",
     "Not Installed": "Não instalado",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "A LICENÇA DE CERVEJA",
     "Default": "Padrão",
     "Do Not Override": "Não substituir",
+    "Do not override": "Não substitua",
     "Disabled": "Desativado",
     "Enabled": "Habilitado",
-    " \\ue0e3 Reset": "\\ue0e3 Redefinir",
+    "Enabled (Default)": "Habilitado (padrão)",
-    "Display": "Exibição",
+    "Enable": "Habilitar",
-    "Application changed\\n\\n": "Aplicativo alterado\\n\\n",
+    "Fatal error": "Erro fatal",
-    "The running application changed\\n\\n": "O aplicativo em execução foi alterado\\n\\n",
-    "while editing was going on.": "enquanto a edição estava acontecendo.",
-    "Board": "Conselho",
-    "%u.%u%u mV": "%u.%u%u mV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "Não foi possível conectar-se ao sysmodule hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Verifique se tudo está\\n\\n",
     "correctly installed and enabled.": "corretamente instalado e ativado.",
-    "Fatal error": "Erro fatal",
+
+    "Edit App Profile": "Editar perfil do aplicativo",
+    "Edit Global Profile": "Editar perfil global",
+    "Temporary Overrides": "Substituições temporárias",
     "Temporary Overrides ": "Substituições temporárias",
+    "  Reset": " Redefinir",
+    "Settings": "Configurações",
+    "About": "Sobre",
+    "Credits": "Créditos",
+
+    "Application changed\\n\\n": "Aplicativo alterado\\n\\n",
+    "The running application changed\\n\\n": "O aplicativo em execução foi alterado\\n\\n",
+    "while editing was going on.": "enquanto a edição estava acontecendo.",
+
     "Sleep Mode": "Modo de suspensão",
-    "Stock": "Estoque",
+    "Stock": "Padrão de fábrica",
     "Dev OC": "Desenvolvedor OC",
     "Boost Mode": "Modo de reforço",
     "Safe Max": "Máx. Seguro",
     "Unsafe Max": "Máximo inseguro",
     "Absolute Max": "Máximo absoluto",
     "Handheld Safe Max": "Portátil Seguro Máx.",
-    "Enable": "Habilitar",
+
-    "Edit App Profile": "Editar perfil do aplicativo",
-    "Edit Global Profile": "Editar perfil global",
-    "Temporary Overrides": "Substituições temporárias",
-    "Settings": "Configurações",
-    "About": "Sobre",
-    "Compiling with minimal features": "Compilando com recursos mínimos",
     "General Settings": "Configurações Gerais",
     "Governor Settings": "Configurações do Governador",
     "Safety Settings": "Configurações de segurança",
@@ -55,42 +45,65 @@
     "CPU Settings": "Configurações de CPU",
     "GPU Settings": "Configurações de GPU",
     "Display Settings": "Configurações de exibição",
+    "Experimental Settings": "Configurações experimentais",
     "Experimental": "Experimental",
+
+    " Settings marked in blue": "Configurações marcadas em azul",
+    "don't require a reboot to apply!": "não requerem reinicialização para aplicar!",
+    "You can also press  to show": "Pressione também  para mostrar",
+    "information about each setting.": "informações sobre cada configuração.",
+
+    " Experimental Settings are incomplete ": "Configurações experimentais incompletas",
+    "and may not work correctly or at all!": "e podem não funcionar corretamente!",
+    "Here be dragons!": "Aqui há dragões!",
+
+    "RAM Voltage Display Mode": "Modo de exibição de tensão RAM",
+    "RAM Display Unit": "Unidade de exibição de RAM",
+    "Polling Interval": "Intervalo de sondagem",
+
     "GPU Scheduling Override Method": "Método de substituição de agendamento de GPU",
+    "GPU Scheduling Override": "Substituição de agendamento de GPU",
+    "GPU Boot Volt": "Tensão de inicialização da GPU",
+    "GPU Boot Voltage": "Tensão de inicialização da GPU",
+    "Memory Frequency Measurement Mode": "Modo de medição de frequência de memória",
+    " Overriding the charge current": "Substituir a corrente de carga",
     "can be dangerous and may cause": "pode ser perigoso e causar",
     "damage to your battery or charger!": "danos à sua bateria ou carregador!",
     "Charge Current Override": "Substituição de corrente de carga",
-    "RAM Voltage Display Mode": "Modo de exibição de tensão RAM",
+    "Display Color Preset": "Predefinição de cor",
-    "Polling Interval": "Intervalo de votação",
+    "Basic": "Básico",
+    "Saturated": "Saturado",
+    "Washed": "Desbotado",
+    "Natural": "Natural",
+    "Vivid": "Vívido",
+
     "CPU Governor Minimum Frequency": "Frequência Mínima do Governador da CPU",
+    " Usage of unsafe display": "O uso de frequências de tela",
     "refresh rates may cause stress": "taxas de atualização podem causar estresse",
     "or damage to your display! ": "ou danos ao seu monitor!",
     "Proceed at your own risk!": "Prossiga por sua conta e risco!",
     "Max Handheld Display": "Visor portátil máximo",
+    "Max Handheld Display Hz": "Hz máximo em modo portátil",
     "Display Clock": "Exibir relógio",
+    " Adjust the display voltage": "Ajuste a tensão do display",
+    "with caution to avoid damage": "com cuidado para evitar danos",
+    "to your display panel! ": "ao painel do display!",
+    "Display Voltage": "Tensão do display",
+
+    "Thermal Throttle Limit": "Limite de aceleração térmica",
     "Official Rating": "Classificação Oficial",
     "TDP Threshold": "Limite de TDP",
-    "Power": "Poder",
+    "Power": "Potência",
-    "Thermal Throttle Limit": "Limite de aceleração térmica",
     "HP Mode": "Modo HP",
-    "Default (Mariko)": "Padrão (Mariko)",
+
-    "Default (Erista)": "Padrão (Erista)",
+    "DVB Shift": "Deslocamento DVB",
-    "Rating": "Avaliação",
+    "SoC Max Volt": "Tensão máxima do SoC",
-    "Safe Max (Mariko)": "Máximo Seguro (Mariko)",
+    "Step Mode": "Modo passo",
-    "Safe Max (Erista)": "Seguro Max (Erista)",
     "RAM VDD2 Voltage": "Tensão RAM VDD2",
-    "Voltage": "Tensão",
     "RAM VDDQ Voltage": "Tensão RAM VDDQ",
+    "Voltage": "Tensão",
     "RAM Frequency Editor": "Editor de frequência RAM",
-    "JEDEC.": "JEDEC.",
+    "Ram Max Clock": "Frequência máxima de Ram",
-    "High speedo needed!": "Alta velocidade necessária!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (precisa de Speedo/PLL extremo)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (precisa de Speedo/PLL extremo)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (precisa de Speedo/PLL extremo)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (precisa de Speedo/PLL ridículo)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (precisa de Speedo/PLL ridículo)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (precisa de Speedo/PLL ridículo)",
-    "Ram Max Clock": "Relógio máximo de Ram",
     "RAM Latency Editor": "Editor de latência de RAM",
     "RAM Timing Reductions": "Reduções de tempo de RAM",
     "Memory Timings": "Tempos de memória",
@@ -102,6 +115,15 @@
     "Memory Latencies": "Latências de memória",
     "Read Latency": "Latência de leitura",
     "Write Latency": "Latência de gravação",
+    "High speedo needed!": "Alto valor de Speedo necessário!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (precisa de Speedo/PLL extremo)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (precisa de Speedo/PLL extremo)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 MHz (precisa de Speedo/PLL extremo)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (precisa de Speedo/PLL ridículo)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (precisa de Speedo/PLL ridículo)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (precisa de Speedo/PLL ridículo)",
+    "JEDEC.": "JEDEC.",
+
     "CPU Boost Clock": "Relógio de aumento da CPU",
     "CPU UV": "UV da CPU",
     "CPU Unlock": "Desbloqueio da CPU",
@@ -114,6 +136,7 @@
     "CPU High UV": "CPU alta UV",
     "CPU Low VMIN": "CPU baixa VMIN",
     "CPU High VMIN": "VMIN alto da CPU",
+
     "No Undervolt": "Sem subtensão",
     "SLT Table": "Tabela SLT",
     "HiOPT Table": "Tabela HiOPT",
@@ -123,19 +146,70 @@
     "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "Tensão máxima da GPU",
     "GPU Voltage Offset": "Compensação de tensão da GPU",
-    "Do not override": "Não substitua",
-    "Enabled (Default)": "Habilitado (padrão)",
-    "96.6% limit": "Limite de 96,6%",
-    "99.7% limit": "Limite de 99,7%",
-    "GPU Scheduling Override": "Substituição de agendamento de GPU",
-    "Official Service": "Serviço Oficial",
     "GPU DVFS Mode": "Modo GPU DVFS",
     "GPU DVFS Offset": "Deslocamento DVFS da GPU",
     "GPU Voltage Table": "Tabela de tensão da GPU",
     "GPU Custom Table (mV)": "Tabela personalizada de GPU (mV)",
+    "Official Service": "Serviço Oficial",
+    "96.6% limit": "Limite de 96,6%",
+    "99.7% limit": "Limite de 99,7%",
+    " Setting GPU Clocks past": "Definir clocks de GPU além de",
+    "1228MHz without a proper undervolt": "1228MHz sem undervolt adequado",
+    "can cause degradation or damage": "pode causar degradação ou danos",
+    "to your console!": "ao seu console!",
     "1075MHz without UV, 1152MHz on SLT": "1075 MHz sem UV, 1152 MHz em SLT",
     "or 1228MHz on HiOPT can cause ": "ou 1228 MHz em HiOPT pode causar",
     "permanent damage to your Switch!": "danos permanentes ao seu Switch!",
     "921MHz without UV and 960MHz on": "921 MHz sem UV e 960 MHz ativado",
-    "SLT or HiOPT can cause ": "SLT ou HiOPT podem causar"
+    "SLT or HiOPT can cause ": "SLT ou HiOPT podem causar",
+
+    "Default (Mariko)": "Padrão (Mariko)",
+    "Default (Erista)": "Padrão (Erista)",
+    "Rating": "Avaliação",
+    "Safe Max (Mariko)": "Máximo Seguro (Mariko)",
+    "Safe Max (Erista)": "Seguro Max (Erista)",
+
+    "Voltages": "Tensões",
+    "RAM Voltage:": "Tensão RAM:",
+    "Display Voltage:": "Tensão do display:",
+    "Temperatures": "Temperaturas",
+    "PLLX Temp:": "PLLX Temp:",
+    "AOTAG Temp:": "AOTAG Temp:",
+    "BQ24193 Temp:": "BQ24193 Temp:",
+    "Normal": "Normal",
+    "Warm": "Morno",
+    "Hot": "Quente",
+    "Overheat": "Superaquecimento",
+    "Not Patched": "Não corrigido",
+    "Invalid": "Inválido",
+    "RAM Bandwidth": "Largura de banda RAM",
+    "RAM BW (Peak):": "BW RAM (Pico):",
+    "RAM BW (All):": "BW RAM (Total):",
+    "RAM BW (CPU):": "BW RAM (CPU):",
+    "RAM BW (GPU):": "BW RAM (GPU):",
+    "Hardware Info": "Info de hardware",
+    "Console Type:": "Tipo de console:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "Módulo DRAM: ",
+    "Software Info": "Info de software",
+    "KIP version:": "Versão KIP:",
+    "sys-dock status:": "status do dock do sistema:",
+    "SaltyNX status:": "Status do SaltyNX:",
+    "RR Display status:": "Status de exibição do RR:",
+    "Wafer Position:": "Posição do wafer:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "Módulo:",
+    "Board": "Placa",
+    "Display": "Exibição",
+
+    "Developers": "Desenvolvedores",
+    "Contributors": "Colaboradores",
+    "Testers": "Testadores",
+    "Translators": "Tradutores",
+    "Special Thanks": "Agradecimentos especiais",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "Compilando com recursos mínimos",
+    "THE BEER-WARE LICENSE": "A LICENÇA DE CERVEJA"
 }

config/horizon-oc/lang/ru.json

@@ -1,38 +1,35 @@
 {
     "Information": "Информация",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Module:",
-    "sys-dock status:": "Статус sys-dock:",
-    "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус RR Display:",
-    "Wafer Position:": "Wafer Position:",
-    "Credits": "Благодарности",
-    "Developers": "Разработчики",
-    "Contributors": "Внесли вклад",
-    "Testers": "Тестеры",
-    "Special Thanks": "Особая благодарность",
     "Unknown": "Неизвестно",
     "Installed": "Установлено",
     "Not Installed": "Не установлено",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "BEER-WARE LICENSE",
     "Default": "По умолчанию",
     "Do Not Override": "Не менять",
+    "No Override": "Не менять",
+    "Do not override": "Не менять",
     "Disabled": "Отключено",
     "Enabled": "Включено",
-    "Auto": "Авто",
+    "Enabled (Default)": "Включено (По умолчанию)",
-    " \\ue0e3 Reset": "\\ue0e3 Сброс",
+    "Enable": "Включено",
-    "Display": "Дисплей",
+    "Fatal error": "Фатальная ошибка",
-    "Application changed\\n\\n": "Приложение изменено\\n\\n",
-    "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n",
-    "while editing was going on.": "пока шло редактирование.",
-    "Board": "Board",
-    "%u.%u%u mV": "%u.%u%u мВ",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "Не удалось подключиться к сис-модулю hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Пожалуйста, убедитесь, что все\\n\\n",
     "correctly installed and enabled.": "правильно установлено и включено.",
-    "Fatal error": "Фатальная ошибка",
+
+    "Edit App Profile": "Профиль приложения",
+    "Edit Global Profile": "Глобальный профиль",
+    "Temporary Overrides": "Временный профиль",
     "Temporary Overrides ": "Временный профиль",
+    "  Reset": " Сброс",
+    "Settings": "Настройки",
+    "About": "Сведения",
+    "Updates": "Обновления",
+    "Credits": "Благодарности",
+
+    "Application changed\\n\\n": "Приложение изменено\\n\\n",
+    "The running application changed\\n\\n": "Запущенное приложение изменилось\\n\\n",
+    "while editing was going on.": "пока шло редактирование.",
+
     "Sleep Mode": "Спящий режим",
     "Stock": "Стандарт",
     "Dev OC": "Разгон dev-кита",
@@ -41,15 +38,7 @@
     "Unsafe Max": "Опасный макс.",
     "Absolute Max": "Абсолютный макс.",
     "Handheld Safe Max": "Портативный безопасный макс.",
-    "Enable": "Включено",
+
-    "Edit App Profile": "Профиль приложения",
-    "Edit Global Profile": "Глобальный профиль",
-    "Temporary Overrides": "Временный профиль",
-    "Settings": "Настройки",
-    "About": "Сведения",
-    "Compiling with minimal features": "Собрано с урезанием функций",
-    "\uE150 Settings marked in blue": "Настройки помеченные синим",
-    "don't require a reboot to apply!": "Синие настройки применяются сразу!",
     "General Settings": "Основные настройки",
     "Governor Settings": "Настройки говернора",
     "Safety Settings": "Настройки безопасности",
@@ -58,45 +47,88 @@
     "CPU Settings": "Настройки CPU",
     "GPU Settings": "Настройки GPU",
     "Display Settings": "Настройки дисплея",
-    "Experimental": "Экспериментальный",
-    "Enable Experimental Settings": "Экспериментальные настройки",
-    "\uE150 Experimental Settings are incomplete ": "Экспериментальные настройки не закончены",
-    "and may not work correctly or at all!": "Экспериментальные настройки не",
-    "Here be dragons!": "закончены и могут не работать!",
     "Experimental Settings": "Экспериментальные",
-    "Live CPU Undervolt": "Мгновенный андервольт CPU",
+    "Experimental": "Экспериментальный",
-    "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU",
+
-    "Memory Frequency Measurement Mode": "Режим измерения частоты RAM",
+    " Settings marked in blue": "Настройки помеченные синим",
-    "\uE150 Overriding the charge current": "Перезапись зарядного тока может",
+    "don't require a reboot to apply!": "не требуют перезагрузки для применения!",
-    "can be dangerous and may cause": "Перезапись зарядного тока может",
+    "You can also press  to show": "Нажмите  для просмотра",
-    "damage to your battery or charger!": "повреждить аккумулятор или зарядку!",
+    "information about each setting.": "информацию о каждом параметре.",
-    "Charge Current Override": "Перезапись зарядного тока",
+
+    " Experimental Settings are incomplete ": "Экспериментальные настройки не закончены",
+    "and may not work correctly or at all!": "и могут не работать правильно или вообще!",
+    "Here be dragons!": "Здесь будут драконы!",
+
     "RAM Voltage Display Mode": "Показ вольтажа RAM",
     "RAM Display Unit": "Показ единицы измерения RAM",
     "Polling Interval": "Интервал опроса",
+    "Enable Experimental Settings": "Экспериментальные настройки",
+
+    "Mariko Middle Clocks": "Средние частоты Mariko",
+    "Live CPU Undervolt": "Андервольт CPU в реальном времени",
+    "GPU Scheduling Override Method": "Метод перезаписи планировщика GPU",
+    "GPU Scheduling Override": "Перезапись планировщика",
+    "GPU Boot Volt": "Вольтаж GPU при загрузке",
+    "GPU Boot Voltage": "Вольтаж GPU при загрузке",
+    "Memory Frequency Measurement Mode": "Режим измерения частоты RAM",
+    " Overriding the charge current": "Изменение зарядного тока",
+    "can be dangerous and may cause": "может быть опасным и может",
+    "damage to your battery or charger!": "повредить аккумулятор или зарядку!",
+    " Overriding the input current": "Изменение входного тока",
+    "limit increases power draw from": "повышает потребление от зарядки",
+    "your charger. And board stress ": "и вызывает напряжение на плате.",
+    "use 1500mA max.": "Используйте максимум 1500 мА.",
+    "Input Current Limit Override": "Перезапись лимита входного тока",
+    "Charge Current Override": "Перезапись зарядного тока",
+    "Display Color Preset": "Пресет цвета дисплея",
+    "Basic": "Базовый",
+    "Saturated": "Насыщенный",
+    "Washed": "Бледный",
+    "Natural": "Натуральный",
+    "Vivid": "Яркий",
+
     "CPU Governor Minimum Frequency": "Минимальная частота говернора CPU",
-    "\uE150 Usage of unsafe display": "\uE150 Использование не безопасной",
+    " Usage of unsafe display": "Использование не безопасной",
-    "refresh rates may cause stress": "Не безопасная частота",
+    "refresh rates may cause stress": "частоты обновления экрана",
-    "or damage to your display! ": "может повредить ваш экран",
+    "or damage to your display! ": "может повредить ваш экран!",
     "Proceed at your own risk!": "Действуйте на свой страх и риск!",
+    "Display Refresh Rate Changing": "Изменение герцовки экрана",
     "Max Handheld Display Hz": "Макс. в портативе",
     "Display Clock": "Частота экрана",
+    " Adjust the display voltage": "Настраивайте вольтаж экрана",
+    "with caution to avoid damage": "с осторожностью во избежание",
+    "to your display panel! ": "повреждений экрана!",
+    "Display Voltage": "Вольтаж экрана",
+
+    
+    "Uncapped Clocks": "Максимальные частоты",
+    "Thermal Throttle": "Троттлинг",
+    "Thermal Throttle Limit": "Предел троттлинга",
     "Official Rating": "Официальный рейтинг",
     "TDP Threshold": "Порог TDP",
     "Power": "Мощность",
-    "Thermal Throttle Limit": "Предел троттлинга",
     "HP Mode": "Режим HP",
-    "Default (Mariko)": "По умолчанию (M)",
+
-    "Default (Erista)": "По умолчанию (E)",
+    "DVB Shift": "DVB сдвиг",
-    "Rating": "Рейтинг",
+    "SoC Max Volt": "Макс. вольт SoC",
-    "Safe Max (Mariko)": "Сейф Макс (M)",
-    "Safe Max (Erista)": "Сейф Макс (E)",
-    "RAM VDD2 Voltage": "Вольтаж VDD2",
-    "Voltage": "Вольтаж",
-    "RAM VDDQ Voltage": "Вольтаж VDDQ",
     "Step Mode": "Частотный шаг",
+    "RAM VDD2 Voltage": "Вольтаж VDD2",
+    "RAM VDDQ Voltage": "Вольтаж VDDQ",
+    "Voltage": "Вольтаж",
     "RAM Frequency Editor": "Редактор частоты",
-    "JEDEC.": "JEDEC.",
+    "Ram Max Clock": "Макс. частота",
+    "RAM Latency Editor": "Редактор задержек",
+    "RAM Timing Reductions": "Настройка таймингов",
+    "SOC Voltage Table": "Таблица вольтажей SoC",
+    "Memory Timings": "Тайминги RAM",
+    "Advanced": "Расширенные",
+    "t6 tRTW Fine Tune": "Точная настройка t6 tRTW",
+    "tRTW Fine Tune": "Точная настройка tRTW",
+    "t7 tWTR Fine Tune": "Точная настройка t7 tWTR",
+    "tWTR Fine Tune": "Точная настройка tWTR",
+    "Memory Latencies": "Задержки памяти",
+    "Read Latency": "Задержка чтения",
+    "Write Latency": "Задержка записи",
     "High speedo needed!": "Для высоких speedo",
     "3333MHz (Needs extreme Speedo/PLL)": "3333 MHz (нужны невероятные speedo/PLL)",
     "3366MHz (Needs extreme Speedo/PLL)": "3366 MHz (нужны невероятные speedo/PLL)",
@@ -104,44 +136,13 @@
     "3433MHz (Needs ridiculous Speedo/PLL)": "3433 MHz (нужны безумные speedo/PLL)",
     "3466MHz (Needs ridiculous Speedo/PLL)": "3466 MHz (нужны безумные speedo/PLL)",
     "3500MHz (Needs ridiculous Speedo/PLL)": "3500 MHz (нужны безумные speedo/PLL)",
-    "Ram Max Clock": "Макс. частота",
+    "JEDEC.": "JEDEC.",
-    "RAM Latency Editor": "Редактор задержек",
+
-    "1333 Latency Max": "1333 задержка",
-    "1600 Latency Max": "1600 задержка",
-    "1866 Latency Max": "1866 задержка",
-    "2133 Latency Max": "2133 задержка",
-    "RAM Timing Reductions": "Настройка таймингов",
-    "Memory Timings": "Тайминги RAM",
-    "RAM-Timing tBreak": "Разбитие таблицы таймингов",
-    "Memory": "RAM",
-    "mem": "RAM",
-    "MEM": "RAM",
-    "Profile": "Профиль",
-    "Governor": "Говернор",
-    "Advanced": "Расширенные",
-    "Docked": "В доке",
-    "Handheld": "Портатив",
-    "Charging": "На зарядке",
-    "USB Charger": "USB Зарядка",
-    "PD Charger": "PD Зарядка", 
-    "Handheld TDP": "TPD в портативе",
-    "Thermal Throttle": "Троттлинг",
-    "Uncapped Clocks": "Максимальные частоты",
-    "SoC DVB Shift": "SoC DVB сдвиг",
-    "SoC Max Volt": "Макс. вольт SoC",
-    "Overwrite Boost Mode": "Перезапись буста",
-    "Display Refresh Rate Changing": "Изменение частоты экрана",
-    "Low t6 tRTW": "Нижний t6 tRTW",
-    "Low t7 tWTR": "Нижний t7 tWTR",
-    "1333WL t2 RP Cap": "Предел 1333WL t2 RP",
-    "t6 tRTW Fine Tune": " Точная настройка t6 tRTW",
-    "tRTW Fine Tune": " Точная настройка tRTW",
-    "t7 tWTR Fine Tune": " Точная настройка t7 tWTR",
-    "tWTR Fine Tune": " Точная настройка tWTR",
-    "Memory Latencies": "Задержки памяти",
-    "Read Latency": "Задержка чтения",
-    "Write Latency": "Задержка записи",
     "CPU Boost Clock": "Частота буста",
+    "Auto CPU RAM OC": "Буст CPU → Разг. RAM",
+    "Auto CPU RAM OC CPU clock": "Буст CPU: частота CPU",
+    "Auto CPU RAM OC Threshold": "Буст CPU: порог RAM",
+    "Overwrite Boost Mode": "Перезаписать буст",
     "CPU UV": "Андервольт CPU",
     "CPU Unlock": "Разблокировка CPU",
     "CPU VMIN": "Мин. вольтаж",
@@ -153,27 +154,83 @@
     "CPU High UV": "Андервольт верхних частот",
     "CPU Low VMIN": "Мин. вольт. нижних частот",
     "CPU High VMIN": "Мин. вольт. верхних частот",
-    "No Undervolt": "Без андервольта",
+
-    "SLT Table": "Таблица SLT",
+    "No Undervolt": "Заводская",
-    "HiOPT Table": "Таблица HiOPT",
+    "SLT Table": "SLT",
+    "HiOPT Table": "HiOPT",
+    "HiOPT- 15mV": "HiOPT -15мВ",
+    "High UV Table": "High UV",
     "GPU Undervolt Table": "Таблица андервольта",
     "GPU Minimum Voltage": "Мин. вольтаж",
     "Calculate GPU Vmin": "Вычисление мин. вольтаж",
     "GPU VMIN": "Мин. вольтаж",
     "GPU Maximum Voltage": "Макс. вольтаж",
     "GPU Voltage Offset": "Смещение вольтажа",
-    "Do not override": "Не менять",
-    "Enabled (Default)": "Включено (По умолчанию)",
-    "96.6% limit": "≤96,6%",
-    "99.7% limit": "≤99,7%",
-    "GPU Scheduling Override": "Перезапись планировщика",
-    "Official Service": "Официальная служба",
     "GPU DVFS Mode": "Режим DVFS",
     "GPU DVFS Offset": "Смещение DVFS",
     "GPU Voltage Table": "Таблица вольтажей",
     "GPU Custom Table (mV)": "Ручная таблица (мВ)",
-    "\uE150 Setting GPU Clocks past": "\uE150 Установка частот GPU выше",
+    "Official Service": "Официальная служба",
-	"1228MHz without a proper undervolt": "Установка частот GPU выше 1228 МГц",
+    "96.6% limit": "≤96,6%",
-    "can cause degradation or damage": "без хорошего андервольта может",
+    "99.7% limit": "≤99,7%",
-    "to your console!": "повредить вашу консоль!"
+    " Setting GPU Clocks past": "Установка частот GPU выше",
+    "1228MHz without a proper undervolt": "1228 МГц без хорошего андервольта",
+    "can cause degradation or damage": "может вызвать деградацию железа",
+    "to your console!": "или повредить вашу консоль!",
+    "1075MHz without UV, 1152MHz on SLT": "1075 МГц без UV, 1152 МГц на SLT",
+    "or 1228MHz on HiOPT can cause ": "или 1228 МГц на HiOPT может вызвать",
+    "permanent damage to your Switch!": "деградацию или повредить консоль!",
+    "921MHz without UV and 960MHz on": "921 МГц без UV и 960 МГц на",
+    "SLT or HiOPT can cause ": "SLT или HiOPT могут вызвать",
+
+    "Default (Mariko)": "По умолчанию (M)",
+    "Default (Erista)": "По умолчанию (E)",
+    "Rating": "Рейтинг",
+    "Safe Max (Mariko)": "Сейф Макс (M)",
+    "Safe Max (Erista)": "Сейф Макс (E)",
+
+    "Voltages": "Вольтажи",
+    "RAM Voltage:": "Вольтаж RAM:",
+    "Display Voltage:": "Вольтаж дисплея:",
+    "Temperatures": "Температуры",
+    "PLLX Temp:": "PLLX Темп.:",
+    "AOTAG Temp:": "AOTAG Темп.:",
+    "BQ24193 Temp:": "BQ24193 Темп.:",
+    "Normal": "Нормальная",
+    "Warm": "Тёплая",
+    "Hot": "Горячая",
+    "Overheat": "Перегрев",
+    "Not Patched": "Не пропатчено",
+    "Invalid": "Недействительно",
+    "RAM Bandwidth": "Пропускная способность RAM",
+    "RAM BW (Peak):": "RAM BW (Макс.):",
+    "RAM BW (All):": "RAM BW (Всего):",
+    "RAM BW (CPU):": "RAM BW (CPU):",
+    "RAM BW (GPU):": "RAM BW (GPU):",
+    "Hardware Info": "Информация об оборудовании",
+    "Console Type:": "Тип консоли:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "Модуль DRAM: ",
+    "Software Info": "Информация о программе",
+    "KIP version:": "Версия KIP:",
+    "sys-dock status:": "Статус sys-dock:",
+    "SaltyNX status:": "Статус SaltyNX:",
+    "RR Display status:": "Статус RR Display:",
+    "Wafer Position:": "Расположение на «Wafer»:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "Module:",
+    "Board": "Board",
+    "Display": "Дисплей",
+
+    "Developers": "Разработчики",
+    "Contributors": "Внесли вклад",
+    "Testers": "Тестеры",
+    "Translators": "Переводчики",
+    "Special Thanks": "Особая благодарность",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u мВ",
+    "Compiling with minimal features": "Собрано с урезанием функций",
+    "THE BEER-WARE LICENSE": "BEER-WARE LICENSE",
+    "Auto": "Авто"
 }

config/horizon-oc/lang/template.json

@@ -0,0 +1,214 @@
+{
+    "Information": "",
+    "Unknown": "",
+    "Installed": "",
+    "Not Installed": "",
+    "Default": "",
+    "Do Not Override": "",
+    "Do not override": "",
+    "Disabled": "",
+    "Enabled": "",
+    "Enabled (Default)": "",
+    "Enable": "",
+    "Fatal error": "",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "",
+    "Please make sure everything is\\n\\n": "",
+    "correctly installed and enabled.": "",
+
+    "Edit App Profile": "",
+    "Edit Global Profile": "",
+    "Temporary Overrides": "",
+    "Temporary Overrides ": "",
+    "  Reset": "",
+    "Settings": "",
+    "About": "",
+    "Credits": "",
+
+    "Application changed\\n\\n": "",
+    "The running application changed\\n\\n": "",
+    "while editing was going on.": "",
+
+    "Sleep Mode": "",
+    "Stock": "",
+    "Dev OC": "",
+    "Boost Mode": "",
+    "Safe Max": "",
+    "Unsafe Max": "",
+    "Absolute Max": "",
+    "Handheld Safe Max": "",
+
+    "General Settings": "",
+    "Governor Settings": "",
+    "Safety Settings": "",
+    "Save KIP Settings": "",
+    "RAM Settings": "",
+    "CPU Settings": "",
+    "GPU Settings": "",
+    "Display Settings": "",
+    "Experimental Settings": "",
+    "Experimental": "",
+
+    " Settings marked in blue": "",
+    "don't require a reboot to apply!": "",
+    "You can also press  to show": "",
+    "information about each setting.": "",
+
+    " Experimental Settings are incomplete ": "",
+    "and may not work correctly or at all!": "",
+    "Here be dragons!": "",
+
+    "RAM Voltage Display Mode": "",
+    "RAM Display Unit": "",
+    "Polling Interval": "",
+
+    "GPU Scheduling Override Method": "",
+    "GPU Scheduling Override": "",
+    "GPU Boot Volt": "",
+    "GPU Boot Voltage": "",
+    "Memory Frequency Measurement Mode": "",
+    " Overriding the charge current": "",
+    "can be dangerous and may cause": "",
+    "damage to your battery or charger!": "",
+    "Charge Current Override": "",
+    "Display Color Preset": "",
+    "Basic": "",
+    "Saturated": "",
+    "Washed": "",
+    "Natural": "",
+    "Vivid": "",
+
+    "CPU Governor Minimum Frequency": "",
+    " Usage of unsafe display": "",
+    "refresh rates may cause stress": "",
+    "or damage to your display! ": "",
+    "Proceed at your own risk!": "",
+    "Max Handheld Display": "",
+    "Max Handheld Display Hz": "",
+    "Display Clock": "",
+    " Adjust the display voltage": "",
+    "with caution to avoid damage": "",
+    "to your display panel! ": "",
+    "Display Voltage": "",
+
+    "Thermal Throttle Limit": "",
+    "Official Rating": "",
+    "TDP Threshold": "",
+    "Power": "",
+    "HP Mode": "",
+
+    "DVB Shift": "",
+    "SoC Max Volt": "",
+    "Step Mode": "",
+    "RAM VDD2 Voltage": "",
+    "RAM VDDQ Voltage": "",
+    "Voltage": "",
+    "RAM Frequency Editor": "",
+    "Ram Max Clock": "",
+    "RAM Latency Editor": "",
+    "RAM Timing Reductions": "",
+    "Memory Timings": "",
+    "Advanced": "",
+    "t6 tRTW Fine Tune": "",
+    "tRTW Fine Tune": "",
+    "t7 tWTR Fine Tune": "",
+    "tWTR Fine Tune": "",
+    "Memory Latencies": "",
+    "Read Latency": "",
+    "Write Latency": "",
+    "High speedo needed!": "",
+    "3333MHz (Needs extreme Speedo/PLL)": "",
+    "3366MHz (Needs extreme Speedo/PLL)": "",
+    "3400MHz (Needs extreme Speedo/PLL)": "",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "",
+    "JEDEC.": "",
+
+    "CPU Boost Clock": "",
+    "CPU UV": "",
+    "CPU Unlock": "",
+    "CPU VMIN": "",
+    "CPU Max Voltage": "",
+    "CPU Max Clock": "",
+    "Extreme UV Table": "",
+    "CPU UV Table": "",
+    "CPU Low UV": "",
+    "CPU High UV": "",
+    "CPU Low VMIN": "",
+    "CPU High VMIN": "",
+
+    "No Undervolt": "",
+    "SLT Table": "",
+    "HiOPT Table": "",
+    "GPU Undervolt Table": "",
+    "GPU Minimum Voltage": "",
+    "Calculate GPU Vmin": "",
+    "GPU VMIN": "",
+    "GPU Maximum Voltage": "",
+    "GPU Voltage Offset": "",
+    "GPU DVFS Mode": "",
+    "GPU DVFS Offset": "",
+    "GPU Voltage Table": "",
+    "GPU Custom Table (mV)": "",
+    "Official Service": "",
+    "96.6% limit": "",
+    "99.7% limit": "",
+    " Setting GPU Clocks past": "",
+    "1228MHz without a proper undervolt": "",
+    "can cause degradation or damage": "",
+    "to your console!": "",
+    "1075MHz without UV, 1152MHz on SLT": "",
+    "or 1228MHz on HiOPT can cause ": "",
+    "permanent damage to your Switch!": "",
+    "921MHz without UV and 960MHz on": "",
+    "SLT or HiOPT can cause ": "",
+
+    "Default (Mariko)": "",
+    "Default (Erista)": "",
+    "Rating": "",
+    "Safe Max (Mariko)": "",
+    "Safe Max (Erista)": "",
+
+    "Voltages": "",
+    "RAM Voltage:": "",
+    "Display Voltage:": "",
+    "Temperatures": "",
+    "PLLX Temp:": "",
+    "AOTAG Temp:": "",
+    "BQ24193 Temp:": "",
+    "Normal": "",
+    "Warm": "",
+    "Hot": "",
+    "Overheat": "",
+    "Not Patched": "",
+    "Invalid": "",
+    "RAM Bandwidth": "",
+    "RAM BW (Peak):": "",
+    "RAM BW (All):": "",
+    "RAM BW (CPU):": "",
+    "RAM BW (GPU):": "",
+    "Hardware Info": "",
+    "Console Type:": "",
+    "Speedo:": "",
+    "DRAM Module: ": "",
+    "Software Info": "",
+    "KIP version:": "",
+    "sys-dock status:": "",
+    "SaltyNX status:": "",
+    "RR Display status:": "",
+    "Wafer Position:": "",
+    "IDDQ:": "",
+    "Module: ": "",
+    "Board": "",
+    "Display": "",
+
+    "Developers": "",
+    "Contributors": "",
+    "Testers": "",
+    "Translators": "",
+    "Special Thanks": "",
+
+    "X: %u Y: %u": "",
+    "%u.%u%u mV": "",
+    "Compiling with minimal features": "",
+}

config/horizon-oc/lang/uk.json

@@ -1,52 +1,42 @@
 {
     "Information": "Інформація",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "Модуль:",
-    "sys-dock status:": "стан sys-dock:",
-    "SaltyNX status:": "Статус SaltyNX:",
-    "RR Display status:": "Статус дисплея RR:",
-    "Wafer Position:": "Позиція пластини:",
-    "Credits": "Кредити",
-    "Developers": "Розробники",
-    "Contributors": "Дописувачі",
-    "Testers": "Тестери",
-    "Special Thanks": "Особлива подяка",
     "Unknown": "Невідомий",
     "Installed": "встановлено",
     "Not Installed": "Не встановлено",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "ЛІЦЕНЗІЯ НА ПИВНИЙ ПОСУД",
     "Default": "За замовчуванням",
     "Do Not Override": "Не перевизначати",
+    "Do not override": "Не перевизначати",
     "Disabled": "Вимкнено",
     "Enabled": "Увімкнено",
-    " \\ue0e3 Reset": "\\ue0e3 Скидання",
+    "Enabled (Default)": "Увімкнено (за замовчуванням)",
-    "Display": "Дисплей",
+    "Enable": "Увімкнути",
-    "Application changed\\n\\n": "Додаток змінено\\n\\n",
+    "Fatal error": "Фатальна помилка",
-    "The running application changed\\n\\n": "Запущена програма змінена\\n\\n",
-    "while editing was going on.": "поки йшло редагування.",
-    "Board": "дошка",
-    "%u.%u%u mV": "%u.%u%u мВ",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "Не вдалося підключитися до системного модуля hoc-clk.\\n\\n",
     "Please make sure everything is\\n\\n": "Переконайтеся, що все\\n\\n",
     "correctly installed and enabled.": "правильно встановлено та включено.",
-    "Fatal error": "Фатальна помилка",
+
+    "Edit App Profile": "Редагувати профіль програми",
+    "Edit Global Profile": "Редагувати глобальний профіль",
+    "Temporary Overrides": "Тимчасові перевизначення",
     "Temporary Overrides ": "Тимчасові перевизначення",
+    "  Reset": " Скидання",
+    "Settings": "Налаштування",
+    "About": "про",
+    "Credits": "Кредити",
+
+    "Application changed\\n\\n": "Додаток змінено\\n\\n",
+    "The running application changed\\n\\n": "Запущена програма змінена\\n\\n",
+    "while editing was going on.": "поки йшло редагування.",
+
     "Sleep Mode": "Режим сну",
-    "Stock": "Запас",
+    "Stock": "Стандарт",
     "Dev OC": "Розробник OC",
     "Boost Mode": "Режим посилення",
     "Safe Max": "Безпечний макс",
     "Unsafe Max": "Небезпечний макс",
     "Absolute Max": "Абсолютний макс",
-    "Handheld Safe Max": "Портативний сейф Макс",
+    "Handheld Safe Max": "Портативний безпечний макс",
-    "Enable": "Увімкнути",
+
-    "Edit App Profile": "Редагувати профіль програми",
-    "Edit Global Profile": "Редагувати глобальний профіль",
-    "Temporary Overrides": "Тимчасові перевизначення",
-    "Settings": "Налаштування",
-    "About": "про",
-    "Compiling with minimal features": "Компіляція з мінімальними можливостями",
     "General Settings": "Загальні налаштування",
     "Governor Settings": "Налаштування губернатора",
     "Safety Settings": "Налаштування безпеки",
@@ -55,41 +45,64 @@
     "CPU Settings": "Налаштування ЦП",
     "GPU Settings": "Налаштування GPU",
     "Display Settings": "Налаштування дисплея",
+    "Experimental Settings": "Експериментальні налаштування",
     "Experimental": "Експериментальний",
+
+    " Settings marked in blue": "Налаштування, позначені синім",
+    "don't require a reboot to apply!": "не потребують перезавантаження!",
+    "You can also press  to show": "Також натисніть  для показу",
+    "information about each setting.": "інформацію про кожне налаштування.",
+
+    " Experimental Settings are incomplete ": "Експериментальні налаштування неповні",
+    "and may not work correctly or at all!": "і можуть взагалі не працювати!",
+    "Here be dragons!": "Тут є дракони!",
+
+    "RAM Voltage Display Mode": "Режим відображення напруги RAM",
+    "RAM Display Unit": "Одиниця відображення RAM",
+    "Polling Interval": "Інтервал опитування",
+
     "GPU Scheduling Override Method": "Метод перевизначення планування GPU",
+    "GPU Scheduling Override": "Перевизначення планування GPU",
+    "GPU Boot Volt": "Напруга завантаження GPU",
+    "GPU Boot Voltage": "Напруга завантаження GPU",
+    "Memory Frequency Measurement Mode": "Режим вимірювання частоти пам'яті",
+    " Overriding the charge current": "Перевизначення струму заряду",
     "can be dangerous and may cause": "може бути небезпечним і може спричинити",
     "damage to your battery or charger!": "пошкодження акумулятора або зарядного пристрою!",
     "Charge Current Override": "Перевизначення струму заряду",
-    "RAM Voltage Display Mode": "Режим відображення напруги RAM",
+    "Display Color Preset": "Кольоровий пресет дисплея",
-    "Polling Interval": "Інтервал опитування",
+    "Basic": "Базовий",
+    "Saturated": "Насичений",
+    "Washed": "Блідий",
+    "Natural": "Природний",
+    "Vivid": "Яскравий",
+
     "CPU Governor Minimum Frequency": "Мінімальна частота регулятора ЦП",
+    " Usage of unsafe display": "Використання небезпечних частот екрана",
     "refresh rates may cause stress": "частоти оновлення можуть викликати стрес",
     "or damage to your display! ": "або пошкодження дисплея!",
     "Proceed at your own risk!": "Продовжуйте на свій страх і ризик!",
     "Max Handheld Display": "Максимальний портативний дисплей",
+    "Max Handheld Display Hz": "Макс. Гц в портативному режимі",
     "Display Clock": "Відображення годинника",
+    " Adjust the display voltage": "Налаштуйте напругу дисплея",
+    "with caution to avoid damage": "обережно, щоб уникнути пошкоджень",
+    "to your display panel! ": "до панелі дисплея!",
+    "Display Voltage": "Напруга дисплея",
+
+    "Thermal Throttle Limit": "Термічний дросельний ліміт",
     "Official Rating": "Офіційний рейтинг",
     "TDP Threshold": "Поріг TDP",
     "Power": "потужність",
-    "Thermal Throttle Limit": "Термічний дросельний ліміт",
     "HP Mode": "Режим HP",
-    "Default (Mariko)": "За замовчуванням (Маріко)",
+
-    "Default (Erista)": "За замовчуванням (Erista)",
+    "DVB Shift": "DVB зсув",
-    "Rating": "Рейтинг",
+    "SoC Max Volt": "Макс. напруга SoC",
-    "Safe Max (Mariko)": "Сейф Макс (Маріко)",
+    "Step Mode": "Покроковий режим",
-    "Safe Max (Erista)": "Сейф Макс (Еріста)",
     "RAM VDD2 Voltage": "Напруга RAM VDD2",
-    "Voltage": "Напруга",
     "RAM VDDQ Voltage": "Напруга RAM VDDQ",
+    "Voltage": "Напруга",
     "RAM Frequency Editor": "Редактор частоти оперативної пам'яті",
-    "JEDEC.": "JEDEC.",
-    "High speedo needed!": "Потрібна висока швидкість!",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (потрібна екстремальна швидкість/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (потрібна екстремальна швидкість/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (потрібна екстремальна швидкість/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (потрібен смішний Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (потрібен смішний Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (потрібен смішний Speedo/PLL)",
     "Ram Max Clock": "Годинник Ram Max",
     "RAM Latency Editor": "Редактор затримки оперативної пам'яті",
     "RAM Timing Reductions": "Скорочення оперативної пам'яті",
@@ -100,20 +113,30 @@
     "t7 tWTR Fine Tune": "t7 tWTR Точне налаштування",
     "tWTR Fine Tune": "Точна настройка tWTR",
     "Memory Latencies": "Затримки пам'яті",
-    "Read Latency": "Прочитати затримку",
+    "Read Latency": "Затримка читання",
     "Write Latency": "Затримка запису",
+    "High speedo needed!": "Потрібна висока швидкість Speedo!",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333 МГц (потрібна екстремальна швидкість/PLL)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366 МГц (потрібна екстремальна швидкість/PLL)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400 МГц (потрібна екстремальна швидкість/PLL)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433 МГц (потрібен смішний Speedo/PLL)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466 МГц (потрібен смішний Speedo/PLL)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500 МГц (потрібен смішний Speedo/PLL)",
+    "JEDEC.": "JEDEC.",
+
     "CPU Boost Clock": "CPU Boost Clock",
     "CPU UV": "CPU UV",
     "CPU Unlock": "Розблокування ЦП",
     "CPU VMIN": "CPU VMIN",
     "CPU Max Voltage": "Максимальна напруга ЦП",
     "CPU Max Clock": "Максимальна частота ЦП",
-    "Extreme UV Table": "Екстремальний ультрафіолетовий стіл",
+    "Extreme UV Table": "Екстремальна UV таблиця",
     "CPU UV Table": "CPU UV Таблиця",
     "CPU Low UV": "CPU Low UV",
     "CPU High UV": "CPU High UV",
     "CPU Low VMIN": "CPU Low VMIN",
     "CPU High VMIN": "CPU High VMIN",
+
     "No Undervolt": "Без андервольта",
     "SLT Table": "Таблиця SLT",
     "HiOPT Table": "Таблиця HiOPT",
@@ -123,19 +146,70 @@
     "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "Максимальна напруга GPU",
     "GPU Voltage Offset": "Зсув напруги GPU",
-    "Do not override": "Не перевизначати",
-    "Enabled (Default)": "Увімкнено (за замовчуванням)",
-    "96.6% limit": "96,6% обмеження",
-    "99.7% limit": "Обмеження 99,7%.",
-    "GPU Scheduling Override": "Перевизначення планування GPU",
-    "Official Service": "Офіційний сервіс",
     "GPU DVFS Mode": "Режим GPU DVFS",
     "GPU DVFS Offset": "GPU DVFS Offset",
     "GPU Voltage Table": "Таблиця напруги GPU",
     "GPU Custom Table (mV)": "Спеціальна таблиця GPU (мВ)",
+    "Official Service": "Офіційний сервіс",
+    "96.6% limit": "96,6% обмеження",
+    "99.7% limit": "99,7% обмеження",
+    " Setting GPU Clocks past": "Встановлення тактових частот GPU вище",
+    "1228MHz without a proper undervolt": "1228 МГц без належного підвольту",
+    "can cause degradation or damage": "може спричинити деградацію або пошкодження",
+    "to your console!": "вашій консолі!",
     "1075MHz without UV, 1152MHz on SLT": "1075 МГц без УФ, 1152 МГц на SLT",
     "or 1228MHz on HiOPT can cause ": "або 1228 МГц на HiOPT може спричинити",
-    "permanent damage to your Switch!": "незворотне пошкодження вашого комутатора!",
+    "permanent damage to your Switch!": "незворотне пошкодження вашого Switch!",
     "921MHz without UV and 960MHz on": "921 МГц без УФ і 960 МГц увімкнено",
-    "SLT or HiOPT can cause ": "SLT або HiOPT можуть спричинити"
+    "SLT or HiOPT can cause ": "SLT або HiOPT можуть спричинити",
+
+    "Default (Mariko)": "За замовчуванням (Маріко)",
+    "Default (Erista)": "За замовчуванням (Erista)",
+    "Rating": "Рейтинг",
+    "Safe Max (Mariko)": "Сейф Макс (Маріко)",
+    "Safe Max (Erista)": "Сейф Макс (Еріста)",
+
+    "Voltages": "Напруги",
+    "RAM Voltage:": "Напруга RAM:",
+    "Display Voltage:": "Напруга дисплея:",
+    "Temperatures": "Температури",
+    "PLLX Temp:": "PLLX Темп.:",
+    "AOTAG Temp:": "AOTAG Темп.:",
+    "BQ24193 Temp:": "BQ24193 Темп.:",
+    "Normal": "Нормально",
+    "Warm": "Тепло",
+    "Hot": "Гаряче",
+    "Overheat": "Перегрів",
+    "Not Patched": "Не виправлено",
+    "Invalid": "Недійсний",
+    "RAM Bandwidth": "Пропускна здатність RAM",
+    "RAM BW (Peak):": "BW RAM (Пік):",
+    "RAM BW (All):": "BW RAM (Усі):",
+    "RAM BW (CPU):": "BW RAM (CPU):",
+    "RAM BW (GPU):": "BW RAM (GPU):",
+    "Hardware Info": "Інфо про апаратне забезпечення",
+    "Console Type:": "Тип консолі:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "Модуль DRAM: ",
+    "Software Info": "Інфо про програмне забезпечення",
+    "KIP version:": "Версія KIP:",
+    "sys-dock status:": "стан sys-dock:",
+    "SaltyNX status:": "Статус SaltyNX:",
+    "RR Display status:": "Статус дисплея RR:",
+    "Wafer Position:": "Позиція пластини:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "Модуль:",
+    "Board": "дошка",
+    "Display": "Дисплей",
+
+    "Developers": "Розробники",
+    "Contributors": "Дописувачі",
+    "Testers": "Тестери",
+    "Translators": "Перекладачі",
+    "Special Thanks": "Особлива подяка",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u мВ",
+    "Compiling with minimal features": "Компіляція з мінімальними можливостями",
+    "THE BEER-WARE LICENSE": "ЛІЦЕНЗІЯ НА ПИВНИЙ ПОСУД"
 }

config/horizon-oc/lang/zh-cn.json

@@ -1,37 +1,33 @@
 {
     "Information": "信息",
-    "IDDQ:": "IDDQ:",
-    "Module: ": "模块: ",
-    "sys-dock status:": "sys-dock 状态:",
-    "SaltyNX status:": "SaltyNX 状态:",
-    "RR Display status:": "RR 显示状态:",
-    "Wafer Position:": "晶圆位置:",
-    "Credits": "致谢",
-    "Developers": "开发者",
-    "Contributors": "贡献者",
-    "Testers": "测试者",
-    "Special Thanks": "特别感谢",
     "Unknown": "未知",
     "Installed": "已安装",
     "Not Installed": "未安装",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "啤酒软件许可协议",
     "Default": "默认",
     "Do Not Override": "不修改",
+    "Do not override": "不修改",
     "Disabled": "已禁用",
     "Enabled": "已启用",
-    " \\ue0e3 Reset": " \\ue0e3 重置",
+    "Enabled (Default)": "已启用 (默认)",
-    "Display": "显示",
+    "Enable": "启用",
-    "Application changed\\n\\n": "应用已变更\\n\\n",
+    "Fatal error": "致命错误",
-    "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n",
-    "while editing was going on.": "编辑过程中发生变更。",
-    "Board": "主板",
-    "%u.%u%u mV": "%u.%u%u mV",
     "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接到 hoc-clk 系统模块。\\n\\n",
     "Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n",
     "correctly installed and enabled.": "正确安装并启用。",
-    "Fatal error": "致命错误",
+
+    "Edit App Profile": "编辑应用配置",
+    "Edit Global Profile": "编辑全局配置",
+    "Temporary Overrides": "临时配置",
     "Temporary Overrides ": "临时配置 ",
+    "  Reset": "  重置",
+    "Settings": "设置",
+    "About": "关于",
+    "Credits": "致谢",
+
+    "Application changed\\n\\n": "应用已变更\\n\\n",
+    "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n",
+    "while editing was going on.": "编辑过程中发生变更。",
+
     "Sleep Mode": "睡眠模式",
     "Stock": "原厂默认",
     "Dev OC": "开发者超频",
@@ -40,13 +36,7 @@
     "Unsafe Max": "危险最大值",
     "Absolute Max": "绝对最大值",
     "Handheld Safe Max": "掌机模式安全最大值",
-    "Enable": "启用",
+
-    "Edit App Profile": "编辑应用配置",
-    "Edit Global Profile": "编辑全局配置",
-    "Temporary Overrides": "临时配置",
-    "Settings": "设置",
-    "About": "关于",
-    "Compiling with minimal features": "以最小功能编译",
     "General Settings": "通用设置",
     "Governor Settings": "调频器设置",
     "Safety Settings": "安全设置",
@@ -55,61 +45,69 @@
     "CPU Settings": "CPU 设置",
     "GPU Settings": "GPU 设置",
     "Display Settings": "显示设置",
+    "Experimental Settings": "实验性设置",
     "Experimental": "实验性功能",
+
+    " Settings marked in blue": "蓝色标注的设置",
+    "don't require a reboot to apply!": "无需重启即可应用！",
+    "You can also press  to show": "也可按  查看",
+    "information about each setting.": "每项设置的说明。",
+
+    " Experimental Settings are incomplete ": "实验性设置尚未完成",
+    "and may not work correctly or at all!": "且可能无法正常工作！",
+    "Here be dragons!": "此处有险！",
+
+    "RAM Voltage Display Mode": "内存电压显示模式",
+    "RAM Display Unit": "内存显示单位",
+    "Polling Interval": "刷新间隔",
+
     "GPU Scheduling Override Method": "GPU 调度覆盖方式",
+    "GPU Scheduling Override": "GPU 调度修改",
+    "GPU Boot Volt": "GPU 启动电压",
+    "GPU Boot Voltage": "GPU 启动电压",
+    "Memory Frequency Measurement Mode": "内存频率测量模式",
+    " Overriding the charge current": "修改充电电流",
     "can be dangerous and may cause": "存在风险，可能导致",
     "damage to your battery or charger!": "电池或充电器损坏！",
     "Charge Current Override": "充电电流修改",
-    "RAM Voltage Display Mode": "内存电压显示模式",
+    "Display Color Preset": "显示颜色预设",
-    "Polling Interval": "刷新间隔",
+    "Basic": "基础",
+    "Saturated": "饱和",
+    "Washed": "淡色",
+    "Natural": "自然",
+    "Vivid": "鲜艳",
+
     "CPU Governor Minimum Frequency": "CPU 调频器最低频率",
-    "\uE150 Usage of unsafe display": "\uE150 不安全的显示屏",
+    " Usage of unsafe display": "不安全的显示屏",
     "refresh rates may cause stress": "刷新率可能会对",
     "or damage to your display! ": "显示屏造成压力或损坏！ ",
     "Proceed at your own risk!": "操作风险自负！",
     "Max Handheld Display": "掌机模式最大显示率",
+    "Max Handheld Display Hz": "掌机最大显示率 Hz",
     "Display Clock": "显示时钟",
+    " Adjust the display voltage": "调整显示电压",
+    "with caution to avoid damage": "请谨慎以避免损坏",
+    "to your display panel! ": "显示屏面板！",
+    "Display Voltage": "显示电压",
+
+    "Thermal Throttle Limit": "温控设置",
     "Official Rating": "官方额定值",
     "TDP Threshold": "TDP 阈值",
     "Power": "电源",
-    "Thermal Throttle Limit": "温控设置",
     "HP Mode": "高性能模式",
-    "Default (Mariko)": "默认 (Mariko)",
+
-    "Default (Erista)": "默认 (Erista)",
+    "DVB Shift": "DVB 偏移",
-    "Rating": "额定值",
+    "SoC Max Volt": "SoC 最大电压",
-    "Safe Max (Mariko)": "安全最大值 (Mariko)",
+    "Step Mode": "步进模式",
-    "Safe Max (Erista)": "安全最大值 (Erista)",
     "RAM VDD2 Voltage": "内存 VDD2 电压",
-    "Voltage": "电压",
     "RAM VDDQ Voltage": "内存 VDDQ 电压",
+    "Voltage": "电压",
     "RAM Frequency Editor": "内存频率编辑器",
-    "JEDEC.": "JEDEC 标准。",
-    "High speedo needed!": "需要高 Speedo 配置！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)",
     "Ram Max Clock": "内存最大频率",
     "RAM Latency Editor": "内存延迟编辑器",
     "RAM Timing Reductions": "内存时序优化",
     "Memory Timings": "内存时序",
-    "Memory": "内存",
-    "mem": "内存",
-    "Governor": "调频器",
     "Advanced": "高级",
-    "Docked": "底座模式",
-    "Handheld": "掌机模式",
-    "Charging": "充电中",
-    "USB Charger": "USB 充电器",
-    "PD Charger": "PD 充电器", 
-    "Handheld TDP": "掌机模式功耗限制",
-    "Thermal Throttle": "温度控制",
-    "Uncapped Clocks": "解除频率上限",
-    "Soc DVB Shift": "SoC DVB偏移",
-    "Overwrite Boost Mode": "接管官方CPU调度",
-    "Display Refresh Rate Changing": "显示刷新率变更",
     "t6 tRTW Fine Tune": "t6 tRTW 微调",
     "tRTW Fine Tune": "tRTW 微调",
     "t7 tWTR Fine Tune": "t7 tWTR 微调",
@@ -117,6 +115,15 @@
     "Memory Latencies": "内存延迟",
     "Read Latency": "读取延迟",
     "Write Latency": "写入延迟",
+    "High speedo needed!": "需要高 Speedo 配置！",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)",
+    "JEDEC.": "JEDEC 标准。",
+
     "CPU Boost Clock": "CPU 超频频率",
     "CPU UV": "CPU 降压",
     "CPU Unlock": "CPU 解锁",
@@ -129,6 +136,7 @@
     "CPU High UV": "CPU 高压降压",
     "CPU Low VMIN": "CPU 低压最低电压",
     "CPU High VMIN": "CPU 高压最低电压",
+
     "No Undervolt": "不降压",
     "SLT Table": "SLT 表",
     "HiOPT Table": "HiOPT 表",
@@ -138,20 +146,70 @@
     "GPU VMIN": "GPU 最低电压",
     "GPU Maximum Voltage": "GPU 最大电压",
     "GPU Voltage Offset": "GPU 电压偏移",
-    "Do not override": "不修改",
-    "Enabled (Default)": "已启用 (默认)",
-    "96.6% limit": "96.6% 限制",
-    "99.7% limit": "99.7% 限制",
-    "GPU Scheduling Override": "GPU 调度修改",
-    "Official Service": "官方服务",
     "GPU DVFS Mode": "GPU DVFS 模式",
     "GPU DVFS Offset": "GPU DVFS 偏移",
     "GPU Voltage Table": "GPU 电压表",
     "GPU Custom Table (mV)": "GPU 自定义表 (mV)",
-    "\uE150 Setting GPU Clocks past": "\uE150 将 GPU 频率设置超过",
+    "Official Service": "官方服务",
+    "96.6% limit": "96.6% 限制",
+    "99.7% limit": "99.7% 限制",
+    " Setting GPU Clocks past": " 将 GPU 频率设置超过",
+    "1228MHz without a proper undervolt": "没有适当降压的 1228MHz",
+    "can cause degradation or damage": "可能导致损耗或损坏",
+    "to your console!": "您的主机！",
     "1075MHz without UV, 1152MHz on SLT": "1075MHz 无降压，SLT 表下 1152MHz",
     "or 1228MHz on HiOPT can cause ": "或 HiOPT 表下 1228MHz 可能导致 ",
     "permanent damage to your Switch!": "Switch 永久损坏！",
     "921MHz without UV and 960MHz on": "921MHz 无降压，SLT/HiOPT 表下 960MHz",
-    "SLT or HiOPT can cause ": "可能导致 "
+    "SLT or HiOPT can cause ": "可能导致 ",
+
+    "Default (Mariko)": "默认 (Mariko)",
+    "Default (Erista)": "默认 (Erista)",
+    "Rating": "额定值",
+    "Safe Max (Mariko)": "安全最大值 (Mariko)",
+    "Safe Max (Erista)": "安全最大值 (Erista)",
+
+    "Voltages": "电压",
+    "RAM Voltage:": "内存电压:",
+    "Display Voltage:": "显示电压:",
+    "Temperatures": "温度",
+    "PLLX Temp:": "PLLX 温度:",
+    "AOTAG Temp:": "AOTAG 温度:",
+    "BQ24193 Temp:": "BQ24193 温度:",
+    "Normal": "正常",
+    "Warm": "温热",
+    "Hot": "过热",
+    "Overheat": "严重过热",
+    "Not Patched": "未修补",
+    "Invalid": "无效",
+    "RAM Bandwidth": "内存带宽",
+    "RAM BW (Peak):": "RAM带宽(峰值):",
+    "RAM BW (All):": "RAM带宽(全部):",
+    "RAM BW (CPU):": "RAM带宽(CPU):",
+    "RAM BW (GPU):": "RAM带宽(GPU):",
+    "Hardware Info": "硬件信息",
+    "Console Type:": "主机类型:",
+    "Speedo:": "Speedo:",
+    "DRAM Module: ": "DRAM 模块: ",
+    "Software Info": "软件信息",
+    "KIP version:": "KIP 版本:",
+    "sys-dock status:": "sys-dock 状态:",
+    "SaltyNX status:": "SaltyNX 状态:",
+    "RR Display status:": "RR 显示状态:",
+    "Wafer Position:": "晶圆位置:",
+    "IDDQ:": "IDDQ:",
+    "Module: ": "模块: ",
+    "Board": "主板",
+    "Display": "显示",
+
+    "Developers": "开发者",
+    "Contributors": "贡献者",
+    "Testers": "测试者",
+    "Translators": "翻译",
+    "Special Thanks": "特别感谢",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "以最小功能编译",
+    "THE BEER-WARE LICENSE": "啤酒软件许可协议"
 }

config/horizon-oc/lang/zh-tw.json

@@ -1,52 +1,42 @@
 {
     "Information": "資訊",
-    "IDDQ:": "國際電話號碼：",
-    "Module: ": "模組：",
-    "sys-dock status:": "系統塢站狀態：",
-    "SaltyNX status:": "SaltyNX 狀態：",
-    "RR Display status:": "RR 顯示狀態：",
-    "Wafer Position:": "晶圓位置：",
-    "Credits": "製作人員",
-    "Developers": "開發商",
-    "Contributors": "貢獻者",
-    "Testers": "測試人員",
-    "Special Thanks": "特別感謝",
     "Unknown": "未知",
     "Installed": "已安裝",
     "Not Installed": "未安裝",
-    "X: %u Y: %u": "X: %u Y: %u",
-    "THE BEER-WARE LICENSE": "啤酒製品許可證",
     "Default": "預設",
     "Do Not Override": "不要覆蓋",
-    "Disabled": "殘障人士",
+    "Do not override": "不要覆蓋",
-    "Enabled": "啟用",
+    "Disabled": "已停用",
-    " \\ue0e3 Reset": "\\ue0e3 重設",
+    "Enabled": "已啟用",
-    "Display": "顯示",
+    "Enabled (Default)": "已啟用（預設）",
+    "Enable": "啟用",
+    "Fatal error": "致命錯誤",
+    "Could not connect to hoc-clk sysmodule.\\n\\n": "無法連接到 hoc-clk 系統模組。\\n\\n",
+    "Please make sure everything is\\n\\n": "請確保一切正常\\n\\n",
+    "correctly installed and enabled.": "正確安裝並啟用。",
+
+    "Edit App Profile": "編輯應用程式設定檔",
+    "Edit Global Profile": "編輯全域設定檔",
+    "Temporary Overrides": "臨時覆蓋",
+    "Temporary Overrides ": "臨時覆蓋",
+    "  Reset": "  重設",
+    "Settings": "設定",
+    "About": "關於",
+    "Credits": "製作人員",
+
     "Application changed\\n\\n": "應用程式已更改\\n\\n",
     "The running application changed\\n\\n": "正在運行的應用程式已更改\\n\\n",
     "while editing was going on.": "當編輯正在進行時。",
-    "Board": "董事會",
+
-    "%u.%u%u mV": "%u.%u%u mV",
-    "Could not connect to hoc-clk sysmodule.\\n\\n": "無法連接到 hoc-clk 系統模組。 \\n\\n",
-    "Please make sure everything is\\n\\n": "請確保一切正常\\n\\n",
-    "correctly installed and enabled.": "正確安裝並啟用。",
-    "Fatal error": "致命錯誤",
-    "Temporary Overrides ": "臨時覆蓋",
     "Sleep Mode": "睡眠模式",
-    "Stock": "庫存",
+    "Stock": "原廠預設",
     "Dev OC": "開發OC",
     "Boost Mode": "升壓模式",
     "Safe Max": "安全最大值",
     "Unsafe Max": "不安全最大值",
     "Absolute Max": "絕對最大值",
-    "Handheld Safe Max": "手持式安全最大",
+    "Handheld Safe Max": "手持式安全最大值",
-    "Enable": "啟用",
+
-    "Edit App Profile": "編輯應用程式設定檔",
-    "Edit Global Profile": "編輯全域設定檔",
-    "Temporary Overrides": "臨時覆蓋",
-    "Settings": "設定",
-    "About": "關於",
-    "Compiling with minimal features": "使用最少的功能進行編譯",
     "General Settings": "常規設定",
     "Governor Settings": "調速器設定",
     "Safety Settings": "安全設定",
@@ -55,42 +45,65 @@
     "CPU Settings": "中央處理器設定",
     "GPU Settings": "GPU設定",
     "Display Settings": "顯示設定",
+    "Experimental Settings": "實驗性設定",
     "Experimental": "實驗性的",
+
+    " Settings marked in blue": "藍色標示的設定",
+    "don't require a reboot to apply!": "無需重開機即可套用！",
+    "You can also press  to show": "也可按  顯示",
+    "information about each setting.": "每項設定的說明。",
+
+    " Experimental Settings are incomplete ": "實驗性設定尚未完成",
+    "and may not work correctly or at all!": "且可能無法正常運作！",
+    "Here be dragons!": "此處有危險！",
+
+    "RAM Voltage Display Mode": "RAM電壓顯示模式",
+    "RAM Display Unit": "記憶體顯示單位",
+    "Polling Interval": "輪詢間隔",
+
     "GPU Scheduling Override Method": "GPU調度覆蓋方法",
+    "GPU Scheduling Override": "GPU 調度覆蓋",
+    "GPU Boot Volt": "GPU 啟動電壓",
+    "GPU Boot Voltage": "GPU 啟動電壓",
+    "Memory Frequency Measurement Mode": "記憶體頻率測量模式",
+    " Overriding the charge current": "覆蓋充電電流",
     "can be dangerous and may cause": "可能很危險並可能導致",
     "damage to your battery or charger!": "損壞電池或充電器！",
     "Charge Current Override": "充電電流覆蓋",
-    "RAM Voltage Display Mode": "RAM電壓顯示模式",
+    "Display Color Preset": "顯示顏色預設",
-    "Polling Interval": "輪詢間隔",
+    "Basic": "基本",
+    "Saturated": "飽和",
+    "Washed": "淡色",
+    "Natural": "自然",
+    "Vivid": "鮮艷",
+
     "CPU Governor Minimum Frequency": "CPU調速器最低頻率",
+    " Usage of unsafe display": "不安全的顯示率",
     "refresh rates may cause stress": "刷新率可能會造成壓力",
     "or damage to your display! ": "或損壞您的顯示器！",
     "Proceed at your own risk!": "請自行承擔風險！",
     "Max Handheld Display": "最大手持顯示器",
+    "Max Handheld Display Hz": "最大手持顯示率 Hz",
     "Display Clock": "顯示時鐘",
+    " Adjust the display voltage": "調整顯示電壓",
+    "with caution to avoid damage": "請謹慎操作以避免損壞",
+    "to your display panel! ": "顯示面板！",
+    "Display Voltage": "顯示電壓",
+
+    "Thermal Throttle Limit": "熱油門限制",
     "Official Rating": "官方評級",
     "TDP Threshold": "TDP閾值",
     "Power": "電源",
-    "Thermal Throttle Limit": "熱油門限制",
+    "HP Mode": "高效能模式",
-    "HP Mode": "惠普模式",
+
-    "Default (Mariko)": "預設（真理子）",
+    "DVB Shift": "DVB 偏移",
-    "Default (Erista)": "預設（埃里斯塔）",
+    "SoC Max Volt": "SoC 最大電壓",
-    "Rating": "評級",
+    "Step Mode": "步進模式",
-    "Safe Max (Mariko)": "安全最大（真理子）",
-    "Safe Max (Erista)": "安全最大（埃里斯塔）",
     "RAM VDD2 Voltage": "RAM VDD2 電壓",
-    "Voltage": "電壓",
     "RAM VDDQ Voltage": "RAM VDDQ 電壓",
+    "Voltage": "電壓",
     "RAM Frequency Editor": "RAM頻率編輯器",
-    "JEDEC.": "JEDEC。",
+    "Ram Max Clock": "記憶體最大時脈",
-    "High speedo needed!": "需要高速！",
-    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz（需要極高的 Speedo/PLL）",
-    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz（需要極高的 Speedo/PLL）",
-    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz（需要極高的 Speedo/PLL）",
-    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz（需要荒謬的 Speedo/PLL）",
-    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz（需要荒謬的 Speedo/PLL）",
-    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz（需要荒謬的 Speedo/PLL）",
-    "Ram Max Clock": "記憶體最大時鐘",
     "RAM Latency Editor": "RAM 延遲編輯器",
     "RAM Timing Reductions": "RAM 時序減少",
     "Memory Timings": "記憶體時序",
@@ -102,18 +115,28 @@
     "Memory Latencies": "記憶體延遲",
     "Read Latency": "讀取延遲",
     "Write Latency": "寫入延遲",
-    "CPU Boost Clock": "CPU 升壓時鐘",
+    "High speedo needed!": "需要高 Speedo 值！",
-    "CPU UV": "中央處理器紫外線",
+    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz（需要極高的 Speedo/PLL）",
+    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz（需要極高的 Speedo/PLL）",
+    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz（需要極高的 Speedo/PLL）",
+    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz（需要荒謬的 Speedo/PLL）",
+    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz（需要荒謬的 Speedo/PLL）",
+    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz（需要荒謬的 Speedo/PLL）",
+    "JEDEC.": "JEDEC。",
+
+    "CPU Boost Clock": "CPU 升壓時脈",
+    "CPU UV": "CPU 降壓",
     "CPU Unlock": "CPU解鎖",
-    "CPU VMIN": "CPU最低電壓",
+    "CPU VMIN": "CPU 最低電壓",
     "CPU Max Voltage": "CPU最大電壓",
     "CPU Max Clock": "CPU 最大時脈",
-    "Extreme UV Table": "極端紫外線表",
+    "Extreme UV Table": "極限降壓表",
-    "CPU UV Table": "CPU UV表",
+    "CPU UV Table": "CPU 降壓表",
-    "CPU Low UV": "CPU低紫外線",
+    "CPU Low UV": "CPU 低壓降壓",
-    "CPU High UV": "CPU高紫外線",
+    "CPU High UV": "CPU 高壓降壓",
     "CPU Low VMIN": "CPU 低 VMIN",
     "CPU High VMIN": "CPU 高 VMIN",
+
     "No Undervolt": "無欠壓",
     "SLT Table": "SLT表",
     "HiOPT Table": "HiOPT表",
@@ -123,19 +146,70 @@
     "GPU VMIN": "GPU VMIN",
     "GPU Maximum Voltage": "GPU最大電壓",
     "GPU Voltage Offset": "GPU電壓偏移",
-    "Do not override": "不要覆蓋",
-    "Enabled (Default)": "啟用（預設）",
-    "96.6% limit": "96.6%限制",
-    "99.7% limit": "99.7%限制",
-    "GPU Scheduling Override": "GPU 調度覆蓋",
-    "Official Service": "官方服務",
     "GPU DVFS Mode": "GPU DVFS 模式",
     "GPU DVFS Offset": "GPU DVFS 偏移",
     "GPU Voltage Table": "GPU電壓表",
     "GPU Custom Table (mV)": "GPU 自訂表 (mV)",
+    "Official Service": "官方服務",
+    "96.6% limit": "96.6%限制",
+    "99.7% limit": "99.7%限制",
+    " Setting GPU Clocks past": "將 GPU 頻率設定超過",
+    "1228MHz without a proper undervolt": "1228MHz 未適當降壓",
+    "can cause degradation or damage": "可能導致劣化或損壞",
+    "to your console!": "您的主機！",
     "1075MHz without UV, 1152MHz on SLT": "無 UV 時為 1075MHz，SLT 時為 1152MHz",
     "or 1228MHz on HiOPT can cause ": "或 HiOPT 上的 1228MHz 可能會導致",
     "permanent damage to your Switch!": "對您的 Switch 造成永久性損壞！",
     "921MHz without UV and 960MHz on": "無 UV 時為 921MHz，開啟時為 960MHz",
-    "SLT or HiOPT can cause ": "SLT 或 HiOPT 可能會導致"
+    "SLT or HiOPT can cause ": "SLT 或 HiOPT 可能會導致",
+
+    "Default (Mariko)": "預設 (Mariko)",
+    "Default (Erista)": "預設 (Erista)",
+    "Rating": "評級",
+    "Safe Max (Mariko)": "安全最大值 (Mariko)",
+    "Safe Max (Erista)": "安全最大值 (Erista)",
+
+    "Voltages": "電壓",
+    "RAM Voltage:": "記憶體電壓：",
+    "Display Voltage:": "顯示電壓：",
+    "Temperatures": "溫度",
+    "PLLX Temp:": "PLLX 溫度：",
+    "AOTAG Temp:": "AOTAG 溫度：",
+    "BQ24193 Temp:": "BQ24193 溫度：",
+    "Normal": "正常",
+    "Warm": "溫熱",
+    "Hot": "過熱",
+    "Overheat": "嚴重過熱",
+    "Not Patched": "未修補",
+    "Invalid": "無效",
+    "RAM Bandwidth": "記憶體頻寬",
+    "RAM BW (Peak):": "RAM頻寬(峰值)：",
+    "RAM BW (All):": "RAM頻寬(全部)：",
+    "RAM BW (CPU):": "RAM頻寬(CPU)：",
+    "RAM BW (GPU):": "RAM頻寬(GPU)：",
+    "Hardware Info": "硬體資訊",
+    "Console Type:": "主機類型：",
+    "Speedo:": "Speedo：",
+    "DRAM Module: ": "DRAM 模組：",
+    "Software Info": "軟體資訊",
+    "KIP version:": "KIP 版本：",
+    "sys-dock status:": "系統塢站狀態：",
+    "SaltyNX status:": "SaltyNX 狀態：",
+    "RR Display status:": "RR 顯示狀態：",
+    "Wafer Position:": "晶圓位置：",
+    "IDDQ:": "IDDQ：",
+    "Module: ": "模組：",
+    "Board": "主板",
+    "Display": "顯示",
+
+    "Developers": "開發商",
+    "Contributors": "貢獻者",
+    "Testers": "測試人員",
+    "Translators": "翻譯",
+    "Special Thanks": "特別感謝",
+
+    "X: %u Y: %u": "X: %u Y: %u",
+    "%u.%u%u mV": "%u.%u%u mV",
+    "Compiling with minimal features": "使用最少的功能進行編譯",
+    "THE BEER-WARE LICENSE": "啤酒製品許可證"
 }

config/ultrahand/lang/de.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Zentrierte Ausrichtung",
     "EXTENDED_BACKDROP": "Erweiterter Hintergrund",
     "MISCELLANEOUS": "Diverse Optionen",
+    "INPUT_SETTINGS": "Eingabe-Einstellungen",
+    "LAUNCH_COMBOS": "Start-Kombos",
+    "SWIPE_TO_OPEN": "Zum Öffnen wischen",
+    "HAPTIC_FEEDBACK": "Haptisches Feedback",
+    "STICK_NAVIGATION": "Stick-Navigation",
+    "HOLD_DURATION": "Haltedauer",
+    "FEATURE_SETTINGS": "Funktionseinstellungen",
+    "OPAQUE_SCREENSHOTS": "Undurchsichtige Screenshots",
+    "RIGHT_SIDE_MODE": "Rechtsmodus",
+    "NTP_SYNC_DOWNLOADS": "NTP-Sync-Downloads",
     "MENU_SETTINGS": "Menüeinstellungen",
-    "USER_GUIDE": "Hilfe",
     "PACKAGES_MENU": "Paket-Menü",
+    "USER_GUIDE": "Hilfe",
     "SHOW_HIDDEN": "Versteckte Anzeigen",
     "SHOW_DELETE": "Löschen Anzeigen",
     "SHOW_UNSUPPORTED": "Nicht unterstützte anzeigen",
     "PAGE_SWAP": "Seitenwechsel",
-    "PAGE_RECALL": "Seitenabruf",
-    "LAUNCH_RECALL": "Start-Zurück",
-    "RIGHT_SIDE_MODE": "Rechtsmodus",
     "OVERLAY_VERSIONS": "Overlay Versionsnr.",
     "PACKAGE_VERSIONS": "Paket Versionsnr.",
     "CLEAN_VERSIONS": "Versionskürzel (v) ausblenden",
+    "THEME_SETTINGS": "Theme-Einstellungen",
+    "DYNAMIC_LOGO": "Dynamisches Logo",
+    "SELECTION_BACKGROUND": "Auswahlhintergrund",
+    "SELECTION_TEXT": "Auswahltext",
+    "SELECTION_VALUE": "Auswahlwert",
+    "LIBULTRAHAND_TITLES": "libultrahand Titel",
+    "LIBULTRAHAND_VERSIONS": "libultrahand Versionen",
+    "PACKAGE_TITLES": "Paket-Titel",
     "KEY_COMBO": "Tasten-Kombi",
     "MODE": "Modus",
     "LAUNCH_MODES": "Startmodi",
@@ -78,6 +93,7 @@
     "MODEL": "Modell",
     "STORAGE": "Speicherplatz",
     "INCOMPATIBLE_WARNING": "Inkompatibel mit AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Overlay nicht gefunden!",
     "SYSTEM_RAM": "System-RAM",
     "FREE": "frei",
     "OVERLAY_MEMORY": "Overlay-Speicher",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "LaunchMenü Rangfolge",
     "OPTIONS": "Optionen",
     "FAILED_TO_OPEN": "Konnte Paket nicht öffnen",
-    "LAUNCH_COMBOS": "Start-Kombos",
     "NOTIFICATIONS": "Benachrichtigungen",
     "NOTIFICATION_SETTINGS": "Benachrichtigungen",
     "SILENCE_NOTIFICATIONS": "Stummschalten",
@@ -112,9 +127,6 @@
     "CLICK": "Klick",
     "TAP": "Tippen",
     "HOLD_FOR_4S": "4s halten",
-    "HAPTIC_FEEDBACK": "Haptisches Feedback",
-    "AUTO_NTP_SYNC": "NTP-Sync auto",
-    "OPAQUE_SCREENSHOTS": "Undurchsichtige Screenshots",
     "ON": "AN",
     "OFF": "AUS",
     "PACKAGE_INFO": "Paket-Info",
@@ -140,17 +152,7 @@
     "ON_MAIN_MENU": "Auf Hauptmenü",
     "ON_A_COMMAND": "Auf einem Befehl",
     "ON_OVERLAY_PACKAGE": "Auf einem OVL/PKT",
-    "FEATURES": "Funktionen",
+    "ULTRAHAND_HAS_STARTED": "Ultrahand gestartet.",
-    "SWIPE_TO_OPEN": "Zum Öffnen wischen",
-    "THEME_SETTINGS": "Theme-Einstellungen",
-    "DYNAMIC_LOGO": "Dynamisches Logo",
-    "SELECTION_BACKGROUND": "Auswahlhintergrund",
-    "SELECTION_TEXT": "Auswahltext",
-    "SELECTION_VALUE": "Auswahlwert",
-    "LIBULTRAHAND_TITLES": "libultrahand Titel",
-    "LIBULTRAHAND_VERSIONS": "libultrahand Versionen",
-    "PACKAGE_TITLES": "Paket-Titel",
-    "ULTRAHAND_HAS_STARTED":   "Ultrahand gestartet.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand hergestartet.",
     "NEW_UPDATE_IS_AVAILABLE": "Neues Update verfügbar!",
     "DELETE_PACKAGE": "Paket löschen",

config/ultrahand/lang/en.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Center Alignment",
     "EXTENDED_BACKDROP": "Extended Backdrop",
     "MISCELLANEOUS": "Miscellaneous",
+    "INPUT_SETTINGS": "Input Settings",
+    "LAUNCH_COMBOS": "Launch Combos",
+    "SWIPE_TO_OPEN": "Swipe to Open",
+    "HAPTIC_FEEDBACK": "Haptic Feedback",
+    "STICK_NAVIGATION": "Stick Navigation",
+    "HOLD_DURATION": "Hold Duration",
+    "FEATURE_SETTINGS": "Feature Settings",
+    "OPAQUE_SCREENSHOTS": "Opaque Screenshots",
+    "RIGHT_SIDE_MODE": "Right-side Mode",
+    "NTP_SYNC_DOWNLOADS": "NTP Sync Downloads",
     "MENU_SETTINGS": "Menu Settings",
-    "USER_GUIDE": "User Guide",
     "PACKAGES_MENU": "Packages Menu",
+    "USER_GUIDE": "User Guide",
     "SHOW_HIDDEN": "Show Hidden",
     "SHOW_DELETE": "Show Delete",
     "SHOW_UNSUPPORTED": "Show Unsupported",
     "PAGE_SWAP": "Page Swap",
-    "PAGE_RECALL": "Page Recall",
-    "LAUNCH_RECALL": "Launch Recall",
-    "RIGHT_SIDE_MODE": "Right-side Mode",
     "OVERLAY_VERSIONS": "Overlay Versions",
     "PACKAGE_VERSIONS": "Package Versions",
     "CLEAN_VERSIONS": "Clean Versions",
+    "THEME_SETTINGS": "Theme Settings",
+    "DYNAMIC_LOGO": "Dynamic Logo",
+    "SELECTION_BACKGROUND": "Selection Background",
+    "SELECTION_TEXT": "Selection Text",
+    "SELECTION_VALUE": "Selection Value",
+    "LIBULTRAHAND_TITLES": "libultrahand Titles",
+    "LIBULTRAHAND_VERSIONS": "libultrahand Versions",
+    "PACKAGE_TITLES": "Package Titles",
     "KEY_COMBO": "Key Combo",
     "MODE": "Mode",
     "LAUNCH_MODES": "Launch Modes",
@@ -78,6 +93,7 @@
     "MODEL": "Model",
     "STORAGE": "Storage",
     "INCOMPATIBLE_WARNING": "Incompatible on AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Overlay does not exist!",
     "SYSTEM_RAM": "System RAM",
     "FREE": "free",
     "OVERLAY_MEMORY": "Overlay Memory",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Sort Priority",
     "OPTIONS": "Options",
     "FAILED_TO_OPEN": "Failed to open file",
-    "LAUNCH_COMBOS": "Launch Combos",
     "NOTIFICATIONS": "Notifications",
     "NOTIFICATION_SETTINGS": "Notification Settings",
     "SILENCE_NOTIFICATIONS": "Silence Notifications",
@@ -112,9 +127,6 @@
     "CLICK": "click",
     "TAP": "tap",
     "HOLD_FOR_4S": "hold for 4s",
-    "HAPTIC_FEEDBACK": "Haptic Feedback",
-    "AUTO_NTP_SYNC": "Auto NTP Sync",
-    "OPAQUE_SCREENSHOTS": "Opaque Screenshots",
     "ON": "On",
     "OFF": "Off",
     "PACKAGE_INFO": "Package Info",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "on Main Menu",
     "ON_A_COMMAND": "on a command",
     "ON_OVERLAY_PACKAGE": "on overlay/package",
-    "FEATURES": "Features",
-    "SWIPE_TO_OPEN": "Swipe to Open",
-    "THEME_SETTINGS": "Theme Settings",
-    "DYNAMIC_LOGO": "Dynamic Logo",
-    "SELECTION_BACKGROUND": "Selection Background",
-    "SELECTION_TEXT": "Selection Text",
-    "SELECTION_VALUE": "Selection Value",
-    "LIBULTRAHAND_TITLES": "libultrahand Titles",
-    "LIBULTRAHAND_VERSIONS": "libultrahand Versions",
-    "PACKAGE_TITLES": "Package Titles",
     "ULTRAHAND_HAS_STARTED": "Ultrahand has started.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand has restarted.",
     "NEW_UPDATE_IS_AVAILABLE": "New update is available!",

config/ultrahand/lang/es.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Alineación centrada",
     "EXTENDED_BACKDROP": "Fondo extendido",
     "MISCELLANEOUS": "Varios",
+    "INPUT_SETTINGS": "Config. de entrada",
+    "LAUNCH_COMBOS": "Combos de inicio",
+    "SWIPE_TO_OPEN": "Desliza para abrir",
+    "HAPTIC_FEEDBACK": "Vibración",
+    "STICK_NAVIGATION": "Navegación con stick",
+    "HOLD_DURATION": "Duración de pulsación",
+    "FEATURE_SETTINGS": "Ajustes de funciones",
+    "OPAQUE_SCREENSHOTS": "Capturas opacas",
+    "RIGHT_SIDE_MODE": "Modo derecho",
+    "NTP_SYNC_DOWNLOADS": "Descargas NTP Sync",
     "MENU_SETTINGS": "Configuración del menú",
-    "USER_GUIDE": "Guía del usuario",
     "PACKAGES_MENU": "Menú de paquetes",
+    "USER_GUIDE": "Guía del usuario",
     "SHOW_HIDDEN": "Mostrar ocultos",
     "SHOW_DELETE": "Mostrar eliminar",
     "SHOW_UNSUPPORTED": "Mostrar no soportados",
     "PAGE_SWAP": "Cambio de página",
-    "PAGE_RECALL": "Llamar página",
-    "LAUNCH_RECALL": "Recall de inicio",
-    "RIGHT_SIDE_MODE": "Modo derecho",
     "OVERLAY_VERSIONS": "Versiones superposición",
     "PACKAGE_VERSIONS": "Versiones paquete",
     "CLEAN_VERSIONS": "Ocultar versión (v)",
+    "THEME_SETTINGS": "Configuración del tema",
+    "DYNAMIC_LOGO": "Logo dinámico",
+    "SELECTION_BACKGROUND": "Fondo selección",
+    "SELECTION_TEXT": "Texto selección",
+    "SELECTION_VALUE": "Valor selección",
+    "LIBULTRAHAND_TITLES": "Títulos libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Versiones libultrahand",
+    "PACKAGE_TITLES": "Títulos de paquete",
     "KEY_COMBO": "Combinación de teclas",
     "MODE": "Modo",
     "LAUNCH_MODES": "Modos de inicio",
@@ -78,6 +93,7 @@
     "MODEL": "Modelo",
     "STORAGE": "Almacenamiento",
     "INCOMPATIBLE_WARNING": "Incompatible con AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "¡Superposición no existe!",
     "SYSTEM_RAM": "RAM del sistema",
     "FREE": "libre",
     "OVERLAY_MEMORY": "Memoria superposición",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Prioridad de orden",
     "OPTIONS": "Opciones",
     "FAILED_TO_OPEN": "No se pudo abrir",
-    "LAUNCH_COMBOS": "Combos de inicio",
     "NOTIFICATIONS": "Notificaciones",
     "NOTIFICATION_SETTINGS": "Configuración de notificaciones",
     "SILENCE_NOTIFICATIONS": "Silenciar notificaciones",
@@ -112,9 +127,6 @@
     "CLICK": "clic",
     "TAP": "toque",
     "HOLD_FOR_4S": "mantener 4s",
-    "HAPTIC_FEEDBACK": "Vibración",
-    "AUTO_NTP_SYNC": "Sync NTP auto",
-    "OPAQUE_SCREENSHOTS": "Capturas opacas",
     "ON": "Encendido",
     "OFF": "Apagado",
     "PACKAGE_INFO": "Info del paquete",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "en menú principal",
     "ON_A_COMMAND": "en un comando",
     "ON_OVERLAY_PACKAGE": "en paquete/superp.",
-    "FEATURES": "Funciones",
-    "SWIPE_TO_OPEN": "Desliza para abrir",
-    "THEME_SETTINGS": "Configuración del tema",
-    "DYNAMIC_LOGO": "Logo dinámico",
-    "SELECTION_BACKGROUND": "Fondo selección",
-    "SELECTION_TEXT": "Texto selección",
-    "SELECTION_VALUE": "Valor selección",
-    "LIBULTRAHAND_TITLES": "Títulos libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Versiones libultrahand",
-    "PACKAGE_TITLES": "Títulos de paquete",
     "ULTRAHAND_HAS_STARTED": "Ultrahand iniciado,",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand reiniciado,",
     "NEW_UPDATE_IS_AVAILABLE": "¡Nueva actualización disponible!",

config/ultrahand/lang/fr.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Alignement centré",
     "EXTENDED_BACKDROP": "Fond étendu",
     "MISCELLANEOUS": "Divers",
+    "INPUT_SETTINGS": "Paramètres saisie",
+    "LAUNCH_COMBOS": "Combos lancement",
+    "SWIPE_TO_OPEN": "Glisser pour ouvrir",
+    "HAPTIC_FEEDBACK": "Retour haptique",
+    "STICK_NAVIGATION": "Navigation stick",
+    "HOLD_DURATION": "Durée maintien",
+    "FEATURE_SETTINGS": "Paramètres de fonctionnalités",
+    "OPAQUE_SCREENSHOTS": "Captures opaques",
+    "RIGHT_SIDE_MODE": "Mode droit",
+    "NTP_SYNC_DOWNLOADS": "Téléchargements NTP Sync",
     "MENU_SETTINGS": "Paramètres du menu",
-    "USER_GUIDE": "Guide utilisateur",
     "PACKAGES_MENU": "Menu Paquets",
+    "USER_GUIDE": "Guide utilisateur",
     "SHOW_HIDDEN": "Afficher cachés",
     "SHOW_DELETE": "Afficher supprimer",
     "SHOW_UNSUPPORTED": "Afficher non supportés",
     "PAGE_SWAP": "Changement de page",
-    "PAGE_RECALL": "Rappel de page",
-    "LAUNCH_RECALL": "Rappel lancement",
-    "RIGHT_SIDE_MODE": "Mode droit",
     "OVERLAY_VERSIONS": "Versions superposition",
     "PACKAGE_VERSIONS": "Versions paquet",
     "CLEAN_VERSIONS": "Masquer version (v)",
+    "THEME_SETTINGS": "Paramètres thème",
+    "DYNAMIC_LOGO": "Logo dynamique",
+    "SELECTION_BACKGROUND": "Fond sélection",
+    "SELECTION_TEXT": "Texte sélection",
+    "SELECTION_VALUE": "Valeur sélection",
+    "LIBULTRAHAND_TITLES": "Titres libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Versions libultrahand",
+    "PACKAGE_TITLES": "Titres paquet",
     "KEY_COMBO": "Combinaison touches",
     "MODE": "Mode",
     "LAUNCH_MODES": "Modes de lancement",
@@ -78,6 +93,7 @@
     "MODEL": "Modèle",
     "STORAGE": "Stockage",
     "INCOMPATIBLE_WARNING": "Incompatible avec AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "La superposition n'existe pas !",
     "SYSTEM_RAM": "RAM système",
     "FREE": "libre",
     "OVERLAY_MEMORY": "Mémoire superposition",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Priorité tri",
     "OPTIONS": "Options",
     "FAILED_TO_OPEN": "Échec ouverture fichier",
-    "LAUNCH_COMBOS": "Combos lancement",
     "NOTIFICATIONS": "Notifications",
     "NOTIFICATION_SETTINGS": "Réglages notifications",
     "SILENCE_NOTIFICATIONS": "Silencer",
@@ -112,9 +127,6 @@
     "CLICK": "clic",
     "TAP": "appui",
     "HOLD_FOR_4S": "maintenir 4s",
-    "HAPTIC_FEEDBACK": "Retour haptique",
-    "AUTO_NTP_SYNC": "Sync NTP auto",
-    "OPAQUE_SCREENSHOTS": "Captures opaques",
     "ON": "Activé",
     "OFF": "Désactivé",
     "PACKAGE_INFO": "Infos paquet",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "sur menu principal",
     "ON_A_COMMAND": "sur une commande",
     "ON_OVERLAY_PACKAGE": "sur paquet/overlay",
-    "FEATURES": "Fonctionnalités",
-    "SWIPE_TO_OPEN": "Glisser pour ouvrir",
-    "THEME_SETTINGS": "Paramètres thème",
-    "DYNAMIC_LOGO": "Logo dynamique",
-    "SELECTION_BACKGROUND": "Fond sélection",
-    "SELECTION_TEXT": "Texte sélection",
-    "SELECTION_VALUE": "Valeur sélection",
-    "LIBULTRAHAND_TITLES": "Titres libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Versions libultrahand",
-    "PACKAGE_TITLES": "Titres paquet",
     "ULTRAHAND_HAS_STARTED": "Ultrahand démarré.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand redémarré,",
     "NEW_UPDATE_IS_AVAILABLE": "Mise à jour disponible !",

config/ultrahand/lang/it.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Allineamento centrato",
     "EXTENDED_BACKDROP": "Sfondo esteso",
     "MISCELLANEOUS": "Varie",
+    "INPUT_SETTINGS": "Impost. input",
+    "LAUNCH_COMBOS": "Combinazioni avvio",
+    "SWIPE_TO_OPEN": "Scorri per aprire",
+    "HAPTIC_FEEDBACK": "Feedback aptico",
+    "STICK_NAVIGATION": "Navigazione stick",
+    "HOLD_DURATION": "Durata pressione",
+    "FEATURE_SETTINGS": "Impostazioni funzionalità",
+    "OPAQUE_SCREENSHOTS": "Screenshot opachi",
+    "RIGHT_SIDE_MODE": "Modalità destra",
+    "NTP_SYNC_DOWNLOADS": "Download NTP Sync",
     "MENU_SETTINGS": "Impostazioni menu",
-    "USER_GUIDE": "Guida utente",
     "PACKAGES_MENU": "Menu Pacchetti",
+    "USER_GUIDE": "Guida utente",
     "SHOW_HIDDEN": "Mostra nascosti",
     "SHOW_DELETE": "Mostra elimina",
     "SHOW_UNSUPPORTED": "Mostra non supportati",
     "PAGE_SWAP": "Scambio pagina",
-    "PAGE_RECALL": "Recall pagina",
-    "LAUNCH_RECALL": "Recall avvio",
-    "RIGHT_SIDE_MODE": "Modalità destra",
     "OVERLAY_VERSIONS": "Versioni sovrapposizione",
     "PACKAGE_VERSIONS": "Versioni pacchetto",
     "CLEAN_VERSIONS": "Nascondi versione (v)",
+    "THEME_SETTINGS": "Impostazioni tema",
+    "DYNAMIC_LOGO": "Logo dinamico",
+    "SELECTION_BACKGROUND": "Sfondo selezione",
+    "SELECTION_TEXT": "Testo selezione",
+    "SELECTION_VALUE": "Valore selezione",
+    "LIBULTRAHAND_TITLES": "Titoli libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Versioni libultrahand",
+    "PACKAGE_TITLES": "Titoli pacchetto",
     "KEY_COMBO": "Combinazione tasti",
     "MODE": "Modalità",
     "LAUNCH_MODES": "Modalità avvio",
@@ -78,6 +93,7 @@
     "MODEL": "Modello",
     "STORAGE": "Archiviazione",
     "INCOMPATIBLE_WARNING": "Incompatibile con AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Overlay non trovato!",
     "SYSTEM_RAM": "RAM sistema",
     "FREE": "libero",
     "OVERLAY_MEMORY": "Memoria sovrapposizione",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Priorità ordinamento",
     "OPTIONS": "Opzioni",
     "FAILED_TO_OPEN": "Impossibile aprire",
-    "LAUNCH_COMBOS": "Combinazioni avvio",
     "NOTIFICATIONS": "Notifiche",
     "NOTIFICATION_SETTINGS": "Impostazioni notifiche",
     "SILENCE_NOTIFICATIONS": "Silenzia notifiche",
@@ -112,9 +127,6 @@
     "CLICK": "clic",
     "TAP": "tocco",
     "HOLD_FOR_4S": "mantieni 4s",
-    "HAPTIC_FEEDBACK": "Feedback aptico",
-    "AUTO_NTP_SYNC": "Sync NTP auto",
-    "OPAQUE_SCREENSHOTS": "Screenshot opachi",
     "ON": "Acceso",
     "OFF": "Spento",
     "PACKAGE_INFO": "Info pacchetto",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "nel menu principale",
     "ON_A_COMMAND": "su un comando",
     "ON_OVERLAY_PACKAGE": "su sovr./pacchetto",
-    "FEATURES": "Funzionalità",
-    "SWIPE_TO_OPEN": "Scorri per aprire",
-    "THEME_SETTINGS": "Impostazioni tema",
-    "DYNAMIC_LOGO": "Logo dinamico",
-    "SELECTION_BACKGROUND": "Sfondo selezione",
-    "SELECTION_TEXT": "Testo selezione",
-    "SELECTION_VALUE": "Valore selezione",
-    "LIBULTRAHAND_TITLES": "Titoli libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Versioni libultrahand",
-    "PACKAGE_TITLES": "Titoli pacchetto",
     "ULTRAHAND_HAS_STARTED": "Ultrahand avviato,",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand riavviato,",
     "NEW_UPDATE_IS_AVAILABLE": "Nuovo aggiornamento disponibile!",

config/ultrahand/lang/ja.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "中央揃え",
     "EXTENDED_BACKDROP": "拡張背景",
     "MISCELLANEOUS": "その他",
+    "INPUT_SETTINGS": "入力設定",
+    "LAUNCH_COMBOS": "起動コンボ",
+    "SWIPE_TO_OPEN": "スワイプで開く",
+    "HAPTIC_FEEDBACK": "振動フィードバック",
+    "STICK_NAVIGATION": "スティック操作",
+    "HOLD_DURATION": "長押し時間",
+    "FEATURE_SETTINGS": "機能設定",
+    "OPAQUE_SCREENSHOTS": "不透明スクショ",
+    "RIGHT_SIDE_MODE": "右側モード",
+    "NTP_SYNC_DOWNLOADS": "NTP同期ダウンロード",
     "MENU_SETTINGS": "メニュー設定",
-    "USER_GUIDE": "ユーザーガイド",
     "PACKAGES_MENU": "パッケージメニュー",
+    "USER_GUIDE": "ユーザーガイド",
     "SHOW_HIDDEN": "非表示を表示",
     "SHOW_DELETE": "削除を表示",
     "SHOW_UNSUPPORTED": "非対応を表示",
     "PAGE_SWAP": "ページ切替",
-    "PAGE_RECALL": "ページリコール",
-    "LAUNCH_RECALL": "起動リコール",
-    "RIGHT_SIDE_MODE": "右側モード",
     "OVERLAY_VERSIONS": "オーバーレイ版",
     "PACKAGE_VERSIONS": "パッケージ版",
     "CLEAN_VERSIONS": "バージョン非表示",
+    "THEME_SETTINGS": "テーマ設定",
+    "DYNAMIC_LOGO": "動的ロゴ",
+    "SELECTION_BACKGROUND": "選択背景",
+    "SELECTION_TEXT": "選択文字",
+    "SELECTION_VALUE": "選択値",
+    "LIBULTRAHAND_TITLES": "libultrahandタイトル",
+    "LIBULTRAHAND_VERSIONS": "libultrahandバージョン",
+    "PACKAGE_TITLES": "パッケージタイトル",
     "KEY_COMBO": "キーコンボ",
     "MODE": "モード",
     "LAUNCH_MODES": "起動モード",
@@ -78,6 +93,7 @@
     "MODEL": "モデル",
     "STORAGE": "ストレージ",
     "INCOMPATIBLE_WARNING": "AMS v1.10+ と互換性がありません",
+    "OVERLAY_DOES_NOT_EXIST": "OLが存在しません！",
     "SYSTEM_RAM": "システムRAM",
     "FREE": "空き",
     "OVERLAY_MEMORY": "オーバーレイメモリ",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "並び順優先度",
     "OPTIONS": "オプション",
     "FAILED_TO_OPEN": "開けませんでした",
-    "LAUNCH_COMBOS": "起動コンボ",
     "NOTIFICATIONS": "通知",
     "NOTIFICATION_SETTINGS": "通知設定",
     "SILENCE_NOTIFICATIONS": "通知をミュート",
@@ -112,9 +127,6 @@
     "CLICK": "クリック",
     "TAP": "タップ",
     "HOLD_FOR_4S": "4秒長押し",
-    "HAPTIC_FEEDBACK": "振動フィードバック",
-    "AUTO_NTP_SYNC": "NTP同期（自動）",
-    "OPAQUE_SCREENSHOTS": "不透明スクショ",
     "ON": "オン",
     "OFF": "オフ",
     "PACKAGE_INFO": "パッケージ情報",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "メインメニュー",
     "ON_A_COMMAND": "コマンド時",
     "ON_OVERLAY_PACKAGE": "OL/パッケージ",
-    "FEATURES": "機能",
-    "SWIPE_TO_OPEN": "スワイプで開く",
-    "THEME_SETTINGS": "テーマ設定",
-    "DYNAMIC_LOGO": "動的ロゴ",
-    "SELECTION_BACKGROUND": "選択背景",
-    "SELECTION_TEXT": "選択文字",
-    "SELECTION_VALUE": "選択値",
-    "LIBULTRAHAND_TITLES": "libultrahandタイトル",
-    "LIBULTRAHAND_VERSIONS": "libultrahandバージョン",
-    "PACKAGE_TITLES": "パッケージタイトル",
     "ULTRAHAND_HAS_STARTED": "Ultrahand起動完了。",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand再起動しました。",
     "NEW_UPDATE_IS_AVAILABLE": "更新あり！",

config/ultrahand/lang/ko.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "가운데 정렬",
     "EXTENDED_BACKDROP": "확장 배경",
     "MISCELLANEOUS": "기타",
+    "INPUT_SETTINGS": "입력 설정",
+    "LAUNCH_COMBOS": "실행 콤보",
+    "SWIPE_TO_OPEN": "스와이프하여 열기",
+    "HAPTIC_FEEDBACK": "진동 피드백",
+    "STICK_NAVIGATION": "스틱 탐색",
+    "HOLD_DURATION": "누름 지속 시간",
+    "FEATURE_SETTINGS": "기능 설정",
+    "OPAQUE_SCREENSHOTS": "불투명 캡처",
+    "RIGHT_SIDE_MODE": "오른쪽 모드",
+    "NTP_SYNC_DOWNLOADS": "NTP 동기화 다운로드",
     "MENU_SETTINGS": "메뉴 설정",
-    "USER_GUIDE": "사용 가이드",
     "PACKAGES_MENU": "패키지 메뉴",
+    "USER_GUIDE": "사용 가이드",
     "SHOW_HIDDEN": "숨김 항목 표시",
     "SHOW_DELETE": "삭제 표시",
     "SHOW_UNSUPPORTED": "비지원 표시",
     "PAGE_SWAP": "페이지 전환",
-    "PAGE_RECALL": "페이지 리콜",
-    "LAUNCH_RECALL": "실행 리콜",
-    "RIGHT_SIDE_MODE": "오른쪽 모드",
     "OVERLAY_VERSIONS": "오버레이 버전",
     "PACKAGE_VERSIONS": "패키지 버전",
     "CLEAN_VERSIONS": "버전 (v) 숨김",
+    "THEME_SETTINGS": "테마 설정",
+    "DYNAMIC_LOGO": "동적 로고",
+    "SELECTION_BACKGROUND": "선택 배경",
+    "SELECTION_TEXT": "선택 텍스트",
+    "SELECTION_VALUE": "선택 값",
+    "LIBULTRAHAND_TITLES": "libultrahand 제목",
+    "LIBULTRAHAND_VERSIONS": "libultrahand 버전",
+    "PACKAGE_TITLES": "패키지 제목",
     "KEY_COMBO": "키 조합",
     "MODE": "모드",
     "LAUNCH_MODES": "실행 모드",
@@ -78,6 +93,7 @@
     "MODEL": "모델",
     "STORAGE": "저장소",
     "INCOMPATIBLE_WARNING": "AMS v1.10+과 호환되지 않습니다",
+    "OVERLAY_DOES_NOT_EXIST": "오버레이가 없습니다!",
     "SYSTEM_RAM": "시스템 RAM",
     "FREE": "여유",
     "OVERLAY_MEMORY": "오버레이 메모리",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "정렬 우선순위",
     "OPTIONS": "옵션",
     "FAILED_TO_OPEN": "파일 열기 실패",
-    "LAUNCH_COMBOS": "실행 콤보",
     "NOTIFICATIONS": "알림",
     "NOTIFICATION_SETTINGS": "알림 설정",
     "SILENCE_NOTIFICATIONS": "알림 무음",
@@ -112,9 +127,6 @@
     "CLICK": "클릭",
     "TAP": "탭",
     "HOLD_FOR_4S": "4초 길게 누르기",
-    "HAPTIC_FEEDBACK": "진동 피드백",
-    "AUTO_NTP_SYNC": "NTP 동기화(자동)",
-    "OPAQUE_SCREENSHOTS": "불투명 캡처",
     "ON": "켜기",
     "OFF": "끄기",
     "PACKAGE_INFO": "패키지 정보",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "메인 메뉴에서",
     "ON_A_COMMAND": "명령어에서",
     "ON_OVERLAY_PACKAGE": "오버레이/패키지에서",
-    "FEATURES": "기능",
-    "SWIPE_TO_OPEN": "스와이프하여 열기",
-    "THEME_SETTINGS": "테마 설정",
-    "DYNAMIC_LOGO": "동적 로고",
-    "SELECTION_BACKGROUND": "선택 배경",
-    "SELECTION_TEXT": "선택 텍스트",
-    "SELECTION_VALUE": "선택 값",
-    "LIBULTRAHAND_TITLES": "libultrahand 제목",
-    "LIBULTRAHAND_VERSIONS": "libultrahand 버전",
-    "PACKAGE_TITLES": "패키지 제목",
     "ULTRAHAND_HAS_STARTED": "Ultrahand 시작됨。",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand 재시작됨。",
     "NEW_UPDATE_IS_AVAILABLE": "새 업데이트 있음!",

config/ultrahand/lang/nl.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Centrale uitlijning",
     "EXTENDED_BACKDROP": "Uitgebreide achtergrond",
     "MISCELLANEOUS": "Overige",
+    "INPUT_SETTINGS": "Invoerinstellingen",
+    "LAUNCH_COMBOS": "Start-Combinaties",
+    "SWIPE_TO_OPEN": "Veeg om te openen",
+    "HAPTIC_FEEDBACK": "Haptische feedback",
+    "STICK_NAVIGATION": "Stick-navigatie",
+    "HOLD_DURATION": "Ingedrukte duur",
+    "FEATURE_SETTINGS": "Functie-instellingen",
+    "OPAQUE_SCREENSHOTS": "Ondoorzichtige screenshots",
+    "RIGHT_SIDE_MODE": "Rechterkantmodus",
+    "NTP_SYNC_DOWNLOADS": "NTP-sync downloads",
     "MENU_SETTINGS": "Menu-instellingen",
-    "USER_GUIDE": "Handleiding",
     "PACKAGES_MENU": "Pakkettenmenu",
+    "USER_GUIDE": "Handleiding",
     "SHOW_HIDDEN": "Verborgen tonen",
     "SHOW_DELETE": "Verwijderen tonen",
     "SHOW_UNSUPPORTED": "Niet-ondersteunde tonen",
     "PAGE_SWAP": "Pagina wisselen",
-    "PAGE_RECALL": "Pagina herstellen",
-    "LAUNCH_RECALL": "Start herstellen",
-    "RIGHT_SIDE_MODE": "Rechterkantmodus",
     "OVERLAY_VERSIONS": "Overlay-versies",
     "PACKAGE_VERSIONS": "Pakket-versies",
     "CLEAN_VERSIONS": "Versie (v) verbergen",
+    "THEME_SETTINGS": "Thema-instellingen",
+    "DYNAMIC_LOGO": "Dynamisch logo",
+    "SELECTION_BACKGROUND": "Selectie-achtergrond",
+    "SELECTION_TEXT": "Selectietekst",
+    "SELECTION_VALUE": "Selectiewaarde",
+    "LIBULTRAHAND_TITLES": "libultrahand-titels",
+    "LIBULTRAHAND_VERSIONS": "libultrahand-versies",
+    "PACKAGE_TITLES": "Pakkettitels",
     "KEY_COMBO": "Toetscombinatie",
     "MODE": "Modus",
     "LAUNCH_MODES": "Startmodi",
@@ -78,6 +93,7 @@
     "MODEL": "Model",
     "STORAGE": "Opslag",
     "INCOMPATIBLE_WARNING": "Incompatibel met AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Overlay bestaat niet!",
     "SYSTEM_RAM": "Systeem-RAM",
     "FREE": "vrij",
     "OVERLAY_MEMORY": "Overlay-geheugen",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Sorteerprioriteit",
     "OPTIONS": "Opties",
     "FAILED_TO_OPEN": "Bestand openen mislukt",
-    "LAUNCH_COMBOS": "Start-Combinaties",
     "NOTIFICATIONS": "Meldingen",
     "NOTIFICATION_SETTINGS": "Meldingsinstellingen",
     "SILENCE_NOTIFICATIONS": "Meldingen dempen",
@@ -112,9 +127,6 @@
     "CLICK": "klik",
     "TAP": "tik",
     "HOLD_FOR_4S": "4s vasthouden",
-    "HAPTIC_FEEDBACK": "Haptische feedback",
-    "AUTO_NTP_SYNC": "NTP-sync auto",
-    "OPAQUE_SCREENSHOTS": "Ondoorzichtige screenshots",
     "ON": "Aan",
     "OFF": "Uit",
     "PACKAGE_INFO": "Pakketinfo",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "op hoofdmenu",
     "ON_A_COMMAND": "op een opdracht",
     "ON_OVERLAY_PACKAGE": "op overlay/pakket",
-    "FEATURES": "Functies",
-    "SWIPE_TO_OPEN": "Veeg om te openen",
-    "THEME_SETTINGS": "Thema-instellingen",
-    "DYNAMIC_LOGO": "Dynamisch logo",
-    "SELECTION_BACKGROUND": "Selectie-achtergrond",
-    "SELECTION_TEXT": "Selectietekst",
-    "SELECTION_VALUE": "Selectiewaarde",
-    "LIBULTRAHAND_TITLES": "libultrahand-titels",
-    "LIBULTRAHAND_VERSIONS": "libultrahand-versies",
-    "PACKAGE_TITLES": "Pakkettitels",
     "ULTRAHAND_HAS_STARTED": "Ultrahand gestart.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand herstart.",
     "NEW_UPDATE_IS_AVAILABLE": "Update beschikbaar!",

config/ultrahand/lang/pl.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Wyśrodkowanie",
     "EXTENDED_BACKDROP": "Rozszerzone tło",
     "MISCELLANEOUS": "Różne",
+    "INPUT_SETTINGS": "Ustawienia wejścia",
+    "LAUNCH_COMBOS": "Kombinacje startowe",
+    "SWIPE_TO_OPEN": "Przesuń, by otworzyć",
+    "HAPTIC_FEEDBACK": "Wibracje",
+    "STICK_NAVIGATION": "Nawigacja drążkiem",
+    "HOLD_DURATION": "Czas przytrzymania",
+    "FEATURE_SETTINGS": "Ustawienia funkcji",
+    "OPAQUE_SCREENSHOTS": "Nieprzezroczyste zrzuty",
+    "RIGHT_SIDE_MODE": "Tryb prawostronny",
+    "NTP_SYNC_DOWNLOADS": "Pobieranie NTP Sync",
     "MENU_SETTINGS": "Ustawienia menu",
-    "USER_GUIDE": "Poradnik",
     "PACKAGES_MENU": "Menu paczek",
+    "USER_GUIDE": "Poradnik",
     "SHOW_HIDDEN": "Pokaż ukryte",
     "SHOW_DELETE": "Pokaż usuń",
     "SHOW_UNSUPPORTED": "Pokaż nieobsługiwane",
     "PAGE_SWAP": "Zamiana stron",
-    "PAGE_RECALL": "Powrót strony",
-    "LAUNCH_RECALL": "Powrót startowy",
-    "RIGHT_SIDE_MODE": "Tryb prawostronny",
     "OVERLAY_VERSIONS": "Wersje nakładek",
     "PACKAGE_VERSIONS": "Wersje paczek",
     "CLEAN_VERSIONS": "Ukryj wersję (v)",
+    "THEME_SETTINGS": "Ustawienia motywu",
+    "DYNAMIC_LOGO": "Dynamiczne logo",
+    "SELECTION_BACKGROUND": "Tło wyboru",
+    "SELECTION_TEXT": "Tekst wyboru",
+    "SELECTION_VALUE": "Wartość wyboru",
+    "LIBULTRAHAND_TITLES": "Tytuły libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Wersje libultrahand",
+    "PACKAGE_TITLES": "Tytuły paczek",
     "KEY_COMBO": "Kombinacja klawiszy",
     "MODE": "Tryb",
     "LAUNCH_MODES": "Tryby uruchamiania",
@@ -78,6 +93,7 @@
     "MODEL": "Model",
     "STORAGE": "Pamięć masowa",
     "INCOMPATIBLE_WARNING": "Niezgodny z AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Nakładka nie istnieje!",
     "SYSTEM_RAM": "RAM systemu",
     "FREE": "wolne",
     "OVERLAY_MEMORY": "Pamięć nakładki",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Priorytet sortowania",
     "OPTIONS": "Opcje",
     "FAILED_TO_OPEN": "Nie udało się otworzyć",
-    "LAUNCH_COMBOS": "Kombinacje startowe",
     "NOTIFICATIONS": "Powiadomienia",
     "NOTIFICATION_SETTINGS": "Ustawienia powiadomień",
     "SILENCE_NOTIFICATIONS": "Wycisz powiadomienia",
@@ -112,9 +127,6 @@
     "CLICK": "klik",
     "TAP": "stuknięcie",
     "HOLD_FOR_4S": "przytrzymaj 4s",
-    "HAPTIC_FEEDBACK": "Wibracje",
-    "AUTO_NTP_SYNC": "Sync NTP auto",
-    "OPAQUE_SCREENSHOTS": "Nieprzezroczyste zrzuty",
     "ON": "Włącz",
     "OFF": "Wyłącz",
     "PACKAGE_INFO": "Info paczki",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "w menu głównym",
     "ON_A_COMMAND": "na poleceniu",
     "ON_OVERLAY_PACKAGE": "na nakładce/paczce",
-    "FEATURES": "Funkcje",
-    "SWIPE_TO_OPEN": "Przesuń, by otworzyć",
-    "THEME_SETTINGS": "Ustawienia motywu",
-    "DYNAMIC_LOGO": "Dynamiczne logo",
-    "SELECTION_BACKGROUND": "Tło wyboru",
-    "SELECTION_TEXT": "Tekst wyboru",
-    "SELECTION_VALUE": "Wartość wyboru",
-    "LIBULTRAHAND_TITLES": "Tytuły libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Wersje libultrahand",
-    "PACKAGE_TITLES": "Tytuły paczek",
     "ULTRAHAND_HAS_STARTED": "Ultrahand uruchomiony.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand zrestartowany.",
     "NEW_UPDATE_IS_AVAILABLE": "Dostępna aktualizacja!",

config/ultrahand/lang/pt.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "Alinhamento central",
     "EXTENDED_BACKDROP": "Fundo estendido",
     "MISCELLANEOUS": "Diversos",
+    "INPUT_SETTINGS": "Config. de entrada",
+    "LAUNCH_COMBOS": "Combinações de inicialização",
+    "SWIPE_TO_OPEN": "Deslize para abrir",
+    "HAPTIC_FEEDBACK": "Vibração",
+    "STICK_NAVIGATION": "Navegação por stick",
+    "HOLD_DURATION": "Duração de pressão",
+    "FEATURE_SETTINGS": "Configurações de recursos",
+    "OPAQUE_SCREENSHOTS": "Capturas opacas",
+    "RIGHT_SIDE_MODE": "Modo lado direito",
+    "NTP_SYNC_DOWNLOADS": "Downloads NTP Sync",
     "MENU_SETTINGS": "Configurações do menu",
-    "USER_GUIDE": "Guia do usuário",
     "PACKAGES_MENU": "Menu de Pacotes",
+    "USER_GUIDE": "Guia do usuário",
     "SHOW_HIDDEN": "Mostrar ocultos",
     "SHOW_DELETE": "Mostrar excluir",
     "SHOW_UNSUPPORTED": "Mostrar não suportados",
     "PAGE_SWAP": "Troca de página",
-    "PAGE_RECALL": "Retorno de página",
-    "LAUNCH_RECALL": "Retorno de inicialização",
-    "RIGHT_SIDE_MODE": "Modo lado direito",
     "OVERLAY_VERSIONS": "Versões de sobreposição",
     "PACKAGE_VERSIONS": "Versões de pacote",
     "CLEAN_VERSIONS": "Ocultar versão (v)",
+    "THEME_SETTINGS": "Configurações do tema",
+    "DYNAMIC_LOGO": "Logo dinâmico",
+    "SELECTION_BACKGROUND": "Fundo da seleção",
+    "SELECTION_TEXT": "Texto da seleção",
+    "SELECTION_VALUE": "Valor da seleção",
+    "LIBULTRAHAND_TITLES": "Títulos libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Versões libultrahand",
+    "PACKAGE_TITLES": "Títulos de pacote",
     "KEY_COMBO": "Combinação de teclas",
     "MODE": "Modo",
     "LAUNCH_MODES": "Modos de inicialização",
@@ -78,6 +93,7 @@
     "MODEL": "Modelo",
     "STORAGE": "Armazenamento",
     "INCOMPATIBLE_WARNING": "Incompatível com AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Sobreposição não existe!",
     "SYSTEM_RAM": "RAM do sistema",
     "FREE": "livre",
     "OVERLAY_MEMORY": "Memória de sobreposição",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Prioridade de ordenação",
     "OPTIONS": "Opções",
     "FAILED_TO_OPEN": "Falha ao abrir",
-    "LAUNCH_COMBOS": "Combinações de inicialização",
     "NOTIFICATIONS": "Notificações",
     "NOTIFICATION_SETTINGS": "Configurações de notificações",
     "SILENCE_NOTIFICATIONS": "Silenciar notificações",
@@ -112,9 +127,6 @@
     "CLICK": "clique",
     "TAP": "toque",
     "HOLD_FOR_4S": "manter 4s",
-    "HAPTIC_FEEDBACK": "Vibração",
-    "AUTO_NTP_SYNC": "Sync NTP auto",
-    "OPAQUE_SCREENSHOTS": "Capturas opacas",
     "ON": "Ligado",
     "OFF": "Desligado",
     "PACKAGE_INFO": "Info do pacote",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "no menu principal",
     "ON_A_COMMAND": "em um comando",
     "ON_OVERLAY_PACKAGE": "em sobrep./pacote",
-    "FEATURES": "Recursos",
-    "SWIPE_TO_OPEN": "Deslize para abrir",
-    "THEME_SETTINGS": "Configurações do tema",
-    "DYNAMIC_LOGO": "Logo dinâmico",
-    "SELECTION_BACKGROUND": "Fundo da seleção",
-    "SELECTION_TEXT": "Texto da seleção",
-    "SELECTION_VALUE": "Valor da seleção",
-    "LIBULTRAHAND_TITLES": "Títulos libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Versões libultrahand",
-    "PACKAGE_TITLES": "Títulos de pacote",
     "ULTRAHAND_HAS_STARTED": "Ultrahand iniciado.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand reiniciado.",
     "NEW_UPDATE_IS_AVAILABLE": "Nova atualização disponível!",

config/ultrahand/lang/ru.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "По центру",
     "EXTENDED_BACKDROP": "Расширенный фон",
     "MISCELLANEOUS": "Прочее",
+    "INPUT_SETTINGS": "Настройки ввода",
+    "LAUNCH_COMBOS": "Комбо запуска",
+    "SWIPE_TO_OPEN": "Свайп для открытия",
+    "HAPTIC_FEEDBACK": "Виброотклик",
+    "STICK_NAVIGATION": "Навигация стиком",
+    "HOLD_DURATION": "Время удержания",
+    "FEATURE_SETTINGS": "Настройки функций",
+    "OPAQUE_SCREENSHOTS": "Непрозрачные скриншоты",
+    "RIGHT_SIDE_MODE": "Режим справа",
+    "NTP_SYNC_DOWNLOADS": "Загрузки NTP Sync",
     "MENU_SETTINGS": "Настройки меню",
-    "USER_GUIDE": "Руководство",
     "PACKAGES_MENU": "Меню пакетов",
+    "USER_GUIDE": "Руководство",
     "SHOW_HIDDEN": "Показать скрытые",
     "SHOW_DELETE": "Показать удаление",
     "SHOW_UNSUPPORTED": "Показать неподдерживаемые",
     "PAGE_SWAP": "Смена страницы",
-    "PAGE_RECALL": "Возврат страницы",
-    "LAUNCH_RECALL": "Возврат запуска",
-    "RIGHT_SIDE_MODE": "Режим справа",
     "OVERLAY_VERSIONS": "Версии оверлеев",
     "PACKAGE_VERSIONS": "Версии пакетов",
     "CLEAN_VERSIONS": "Скрыть (v)",
+    "THEME_SETTINGS": "Настройки темы",
+    "DYNAMIC_LOGO": "Динамический логотип",
+    "SELECTION_BACKGROUND": "Фон выделения",
+    "SELECTION_TEXT": "Текст выделения",
+    "SELECTION_VALUE": "Значение",
+    "LIBULTRAHAND_TITLES": "Заголовки libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Версии libultrahand",
+    "PACKAGE_TITLES": "Заголовки пакетов",
     "KEY_COMBO": "Комбинация",
     "MODE": "Режим",
     "LAUNCH_MODES": "Режимы запуска",
@@ -78,6 +93,7 @@
     "MODEL": "Модель",
     "STORAGE": "Хранилище",
     "INCOMPATIBLE_WARNING": "Несовместимо с AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Оверлей не найден!",
     "SYSTEM_RAM": "ОЗУ системы",
     "FREE": "свободно",
     "OVERLAY_MEMORY": "Память оверлея",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Приоритет сортировки",
     "OPTIONS": "Опции",
     "FAILED_TO_OPEN": "Не удалось открыть",
-    "LAUNCH_COMBOS": "Комбо запуска",
     "NOTIFICATIONS": "Уведомления",
     "NOTIFICATION_SETTINGS": "Настройки уведомлений",
     "SILENCE_NOTIFICATIONS": "Отключить уведомления",
@@ -112,9 +127,6 @@
     "CLICK": "клик",
     "TAP": "тап",
     "HOLD_FOR_4S": "удерживать 4 с",
-    "HAPTIC_FEEDBACK": "Виброотклик",
-    "AUTO_NTP_SYNC": "Авто NTP синхр.",
-    "OPAQUE_SCREENSHOTS": "Непрозрачные скриншоты",
     "ON": "Вкл",
     "OFF": "Выкл",
     "PACKAGE_INFO": "Инфо пакета",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "в главном меню",
     "ON_A_COMMAND": "на команде",
     "ON_OVERLAY_PACKAGE": "на оверлее/пакете",
-    "FEATURES": "Функции",
-    "SWIPE_TO_OPEN": "Свайп для открытия",
-    "THEME_SETTINGS": "Настройки темы",
-    "DYNAMIC_LOGO": "Динамический логотип",
-    "SELECTION_BACKGROUND": "Фон выделения",
-    "SELECTION_TEXT": "Текст выделения",
-    "SELECTION_VALUE": "Значение",
-    "LIBULTRAHAND_TITLES": "Заголовки libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Версии libultrahand",
-    "PACKAGE_TITLES": "Заголовки пакетов",
     "ULTRAHAND_HAS_STARTED": "Ultrahand запущен.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand перезапущен.",
     "NEW_UPDATE_IS_AVAILABLE": "Доступно обновление!",

config/ultrahand/lang/uk.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "По центру",
     "EXTENDED_BACKDROP": "Розширений фон",
     "MISCELLANEOUS": "Інше",
+    "INPUT_SETTINGS": "Налаштування вводу",
+    "LAUNCH_COMBOS": "Комбо запуску",
+    "SWIPE_TO_OPEN": "Свайп для відкриття",
+    "HAPTIC_FEEDBACK": "Вібровідгук",
+    "STICK_NAVIGATION": "Навігація стіком",
+    "HOLD_DURATION": "Час утримання",
+    "FEATURE_SETTINGS": "Налаштування функцій",
+    "OPAQUE_SCREENSHOTS": "Непрозорі скріншоти",
+    "RIGHT_SIDE_MODE": "Режим справа",
+    "NTP_SYNC_DOWNLOADS": "Завантаження NTP Sync",
     "MENU_SETTINGS": "Налаштування меню",
-    "USER_GUIDE": "Інструкція",
     "PACKAGES_MENU": "Меню пакетів",
+    "USER_GUIDE": "Інструкція",
     "SHOW_HIDDEN": "Показати приховане",
     "SHOW_DELETE": "Показати видалення",
     "SHOW_UNSUPPORTED": "Показати непідтримуване",
     "PAGE_SWAP": "Зміна сторінки",
-    "PAGE_RECALL": "Повернення сторінки",
-    "LAUNCH_RECALL": "Повернення запуску",
-    "RIGHT_SIDE_MODE": "Режим справа",
     "OVERLAY_VERSIONS": "Версії оверлеїв",
     "PACKAGE_VERSIONS": "Версії пакетів",
     "CLEAN_VERSIONS": "Сховати (v)",
+    "THEME_SETTINGS": "Налаштування теми",
+    "DYNAMIC_LOGO": "Динамічний логотип",
+    "SELECTION_BACKGROUND": "Фон виділення",
+    "SELECTION_TEXT": "Текст виділення",
+    "SELECTION_VALUE": "Значення",
+    "LIBULTRAHAND_TITLES": "Заголовки libultrahand",
+    "LIBULTRAHAND_VERSIONS": "Версії libultrahand",
+    "PACKAGE_TITLES": "Заголовки пакетів",
     "KEY_COMBO": "Комбінація",
     "MODE": "Режим",
     "LAUNCH_MODES": "Режими запуску",
@@ -78,6 +93,7 @@
     "MODEL": "Модель",
     "STORAGE": "Сховище",
     "INCOMPATIBLE_WARNING": "Несумісно з AMS v1.10+",
+    "OVERLAY_DOES_NOT_EXIST": "Оверлей не знайдено!",
     "SYSTEM_RAM": "ОЗУ системи",
     "FREE": "вільно",
     "OVERLAY_MEMORY": "Пам’ять оверлея",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "Пріоритет сортування",
     "OPTIONS": "Опції",
     "FAILED_TO_OPEN": "Не вдалося відкрити",
-    "LAUNCH_COMBOS": "Комбо запуску",
     "NOTIFICATIONS": "Сповіщення",
     "NOTIFICATION_SETTINGS": "Налаштування сповіщень",
     "SILENCE_NOTIFICATIONS": "Вимкнути сповіщення",
@@ -112,9 +127,6 @@
     "CLICK": "клік",
     "TAP": "тап",
     "HOLD_FOR_4S": "утримувати 4 с",
-    "HAPTIC_FEEDBACK": "Вібровідгук",
-    "AUTO_NTP_SYNC": "Авто NTP синхр.",
-    "OPAQUE_SCREENSHOTS": "Непрозорі скріншоти",
     "ON": "Увімк",
     "OFF": "Вимк",
     "PACKAGE_INFO": "Інфо пакета",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "в головному меню",
     "ON_A_COMMAND": "на команді",
     "ON_OVERLAY_PACKAGE": "на оверлеї/пакеті",
-    "FEATURES": "Функції",
-    "SWIPE_TO_OPEN": "Свайп для відкриття",
-    "THEME_SETTINGS": "Налаштування теми",
-    "DYNAMIC_LOGO": "Динамічний логотип",
-    "SELECTION_BACKGROUND": "Фон виділення",
-    "SELECTION_TEXT": "Текст виділення",
-    "SELECTION_VALUE": "Значення",
-    "LIBULTRAHAND_TITLES": "Заголовки libultrahand",
-    "LIBULTRAHAND_VERSIONS": "Версії libultrahand",
-    "PACKAGE_TITLES": "Заголовки пакетів",
     "ULTRAHAND_HAS_STARTED": "Ultrahand запущено.",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand перезапущено.",
     "NEW_UPDATE_IS_AVAILABLE": "Доступне оновлення!",

config/ultrahand/lang/zh-cn.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "居中对齐",
     "EXTENDED_BACKDROP": "扩展背景",
     "MISCELLANEOUS": "其他",
+    "INPUT_SETTINGS": "输入设置",
+    "LAUNCH_COMBOS": "启动组合键",
+    "SWIPE_TO_OPEN": "滑动打开",
+    "HAPTIC_FEEDBACK": "震动反馈",
+    "STICK_NAVIGATION": "摇杆导航",
+    "HOLD_DURATION": "长按时长",
+    "FEATURE_SETTINGS": "功能设置",
+    "OPAQUE_SCREENSHOTS": "不透明截图",
+    "RIGHT_SIDE_MODE": "右侧模式",
+    "NTP_SYNC_DOWNLOADS": "NTP同步下载",
     "MENU_SETTINGS": "菜单设置",
-    "USER_GUIDE": "使用指南",
     "PACKAGES_MENU": "插件包菜单",
+    "USER_GUIDE": "使用指南",
     "SHOW_HIDDEN": "显示隐藏项",
     "SHOW_DELETE": "显示删除",
     "SHOW_UNSUPPORTED": "显示不支持项",
     "PAGE_SWAP": "页面切换",
-    "PAGE_RECALL": "页面回退",
-    "LAUNCH_RECALL": "启动回顾",
-    "RIGHT_SIDE_MODE": "右侧模式",
     "OVERLAY_VERSIONS": "插件版本",
     "PACKAGE_VERSIONS": "插件包版本",
     "CLEAN_VERSIONS": "隐藏版本标签",
+    "THEME_SETTINGS": "主题设置",
+    "DYNAMIC_LOGO": "动态 Logo",
+    "SELECTION_BACKGROUND": "选中背景",
+    "SELECTION_TEXT": "选中文字",
+    "SELECTION_VALUE": "选中值",
+    "LIBULTRAHAND_TITLES": "libultrahand 标题",
+    "LIBULTRAHAND_VERSIONS": "libultrahand 版本",
+    "PACKAGE_TITLES": "插件包标题",
     "KEY_COMBO": "按键组合",
     "MODE": "模式",
     "LAUNCH_MODES": "启动模式",
@@ -78,6 +93,7 @@
     "MODEL": "型号",
     "STORAGE": "存储",
     "INCOMPATIBLE_WARNING": "与 AMS v1.10+ 不兼容",
+    "OVERLAY_DOES_NOT_EXIST": "插件不存在！",
     "SYSTEM_RAM": "系统内存",
     "FREE": "剩余",
     "OVERLAY_MEMORY": "插件内存",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "排序优先级",
     "OPTIONS": "选项",
     "FAILED_TO_OPEN": "打开失败",
-    "LAUNCH_COMBOS": "启动组合键",
     "NOTIFICATIONS": "通知",
     "NOTIFICATION_SETTINGS": "通知设置",
     "SILENCE_NOTIFICATIONS": "静音通知",
@@ -112,9 +127,6 @@
     "CLICK": "点击",
     "TAP": "轻触",
     "HOLD_FOR_4S": "长按 4 秒",
-    "HAPTIC_FEEDBACK": "震动反馈",
-    "AUTO_NTP_SYNC": "NTP自动同步",
-    "OPAQUE_SCREENSHOTS": "不透明截图",
     "ON": "开",
     "OFF": "关",
     "PACKAGE_INFO": "插件包信息",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "主菜单中",
     "ON_A_COMMAND": "在命令上",
     "ON_OVERLAY_PACKAGE": "在插件/插件包上",
-    "FEATURES": "功能",
-    "SWIPE_TO_OPEN": "滑动打开",
-    "THEME_SETTINGS": "主题设置",
-    "DYNAMIC_LOGO": "动态 Logo",
-    "SELECTION_BACKGROUND": "选中背景",
-    "SELECTION_TEXT": "选中文字",
-    "SELECTION_VALUE": "选中值",
-    "LIBULTRAHAND_TITLES": "libultrahand 标题",
-    "LIBULTRAHAND_VERSIONS": "libultrahand 版本",
-    "PACKAGE_TITLES": "插件包标题",
     "ULTRAHAND_HAS_STARTED": "Ultrahand 已启动。",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand 已重启。",
     "NEW_UPDATE_IS_AVAILABLE": "有新版本！",

config/ultrahand/lang/zh-tw.json

@@ -48,19 +48,34 @@
     "CENTER_ALIGNMENT": "置中對齊",
     "EXTENDED_BACKDROP": "延伸背景",
     "MISCELLANEOUS": "其他",
+    "INPUT_SETTINGS": "輸入設定",
+    "LAUNCH_COMBOS": "啟動組合鍵",
+    "SWIPE_TO_OPEN": "滑動開啟",
+    "HAPTIC_FEEDBACK": "震動回饋",
+    "STICK_NAVIGATION": "搖桿導航",
+    "HOLD_DURATION": "長按時長",
+    "FEATURE_SETTINGS": "功能設定",
+    "OPAQUE_SCREENSHOTS": "不透明截圖",
+    "RIGHT_SIDE_MODE": "右側模式",
+    "NTP_SYNC_DOWNLOADS": "NTP同步下載",
     "MENU_SETTINGS": "選單設定",
-    "USER_GUIDE": "使用指南",
     "PACKAGES_MENU": "外掛包選單",
+    "USER_GUIDE": "使用指南",
     "SHOW_HIDDEN": "顯示隱藏項",
     "SHOW_DELETE": "顯示刪除",
     "SHOW_UNSUPPORTED": "顯示不支援",
     "PAGE_SWAP": "頁面切換",
-    "PAGE_RECALL": "頁面回退",
-    "LAUNCH_RECALL": "啟動回顧",
-    "RIGHT_SIDE_MODE": "右側模式",
     "OVERLAY_VERSIONS": "外掛版本",
     "PACKAGE_VERSIONS": "外掛包版本",
     "CLEAN_VERSIONS": "隱藏版本標籤",
+    "THEME_SETTINGS": "主題設定",
+    "DYNAMIC_LOGO": "動態 Logo",
+    "SELECTION_BACKGROUND": "選中背景",
+    "SELECTION_TEXT": "選中文本",
+    "SELECTION_VALUE": "選中值",
+    "LIBULTRAHAND_TITLES": "libultrahand 標題",
+    "LIBULTRAHAND_VERSIONS": "libultrahand 版本",
+    "PACKAGE_TITLES": "外掛包標題",
     "KEY_COMBO": "按鍵組合",
     "MODE": "模式",
     "LAUNCH_MODES": "啟動模式",
@@ -78,6 +93,7 @@
     "MODEL": "型號",
     "STORAGE": "儲存空間",
     "INCOMPATIBLE_WARNING": "與 AMS v1.10+ 不相容",
+    "OVERLAY_DOES_NOT_EXIST": "外掛不存在！",
     "SYSTEM_RAM": "系統記憶體",
     "FREE": "剩餘",
     "OVERLAY_MEMORY": "外掛記憶體",
@@ -99,7 +115,6 @@
     "SORT_PRIORITY": "排序優先級",
     "OPTIONS": "選項",
     "FAILED_TO_OPEN": "開啟失敗",
-    "LAUNCH_COMBOS": "啟動組合鍵",
     "NOTIFICATIONS": "通知",
     "NOTIFICATION_SETTINGS": "通知設定",
     "SILENCE_NOTIFICATIONS": "靜音通知",
@@ -112,9 +127,6 @@
     "CLICK": "點擊",
     "TAP": "輕觸",
     "HOLD_FOR_4S": "長按 4 秒",
-    "HAPTIC_FEEDBACK": "震動回饋",
-    "AUTO_NTP_SYNC": "NTP自動同步",
-    "OPAQUE_SCREENSHOTS": "不透明截圖",
     "ON": "開",
     "OFF": "關",
     "PACKAGE_INFO": "外掛包資訊",
@@ -140,16 +152,6 @@
     "ON_MAIN_MENU": "主選單中",
     "ON_A_COMMAND": "在指令上",
     "ON_OVERLAY_PACKAGE": "在外掛/外掛包上",
-    "FEATURES": "功能",
-    "SWIPE_TO_OPEN": "滑動開啟",
-    "THEME_SETTINGS": "主題設定",
-    "DYNAMIC_LOGO": "動態 Logo",
-    "SELECTION_BACKGROUND": "選中背景",
-    "SELECTION_TEXT": "選中文本",
-    "SELECTION_VALUE": "選中值",
-    "LIBULTRAHAND_TITLES": "libultrahand 標題",
-    "LIBULTRAHAND_VERSIONS": "libultrahand 版本",
-    "PACKAGE_TITLES": "外掛包標題",
     "ULTRAHAND_HAS_STARTED": "Ultrahand 已啟動。",
     "ULTRAHAND_HAS_RESTARTED": "Ultrahand 已重啟。",
     "NEW_UPDATE_IS_AVAILABLE": "有新版本！",