51 lines
2.8 KiB
Markdown
51 lines
2.8 KiB
Markdown
# Flipper-IRDB
|
|
|
|
A **maintained** collective of different IR filess for the Flipper! Maintainers/Major contributors include:
|
|
* [Lucaslhm](https://github.com/Lucaslhm)
|
|
* [UberGuidoZ](https://github.com/UberGuidoZ)
|
|
* [DedHedZed](https://github.com/dedhedzed)
|
|
* [Amec0e](https://github.com/amec0e)
|
|
* [E_Surge](https://github.com/ESurge)
|
|
* [Zecred](https://github.com/bussardrobbie)
|
|
* [SkeletonMan](https://github.com/SkeletonMan03/)
|
|
* [jaroslavmraz](https://github.com/jaroslavmraz)
|
|
* [FalsePhilosopher](https://github.com/FalsePhilosopher)
|
|
* [ezod](https://github.com/ezod)
|
|
* ... and many others!
|
|
|
|
## Organization
|
|
|
|
The files within the "Converted" section are only organized by manufacturer name, separated out into 0-9 and A-Z categories for ease of browsing.
|
|
|
|
## To Install New Remotes On Your Flipper:
|
|
|
|
1. Git clone this repo to your local PC. [Multiple options are explained here](https://docs.github.com/en/repositories/creating-and-managing-repositories/cloning-a-repository).
|
|
2. Open the cloned repository in a File Explorer.
|
|
3. Connect your Flipper to your PC using a USB-C cable.
|
|
4. Open [QFlipper](https://flipperzero.one/update)
|
|
5. Verify that your Flipper shows "Connected"
|
|
6. Ensure your Flipper is fully up-to-date:
|
|
1. Look for the green "Update" button near the middle-right of the application.
|
|
2. Press "Update" and allow the Flipper to complete the Update process and then reboot before continuing.
|
|
7. Open the File Manager by selecting the "File Manager" icon (piece of paper) on the top left of the QFlipper application.
|
|
8. Select `SD Card`, then navigate to the `infrared` folder by double-clicking its icon.
|
|
9. Drag the .ir files you want on your Flipper from the File Explorer into the QFlipper File Manager.
|
|
10. Disconnect the Flipper from the PC and have fun!
|
|
|
|
NOTE: If you plan to copy them all, it's highly recommended to [dismount the SD card](https://docs.flipperzero.one/basics/sd-card#g4-removing-the-sd-card) and plug it into the computer directly.
|
|
|
|
## To install `power_off` remote on your Flipper:
|
|
|
|
1. Rename your current `projectors.ir` asset from `/SD Card/infrared/assets/projectors.ir` in [QFlipper](https://flipperzero.one/update) to `projectors.ir.ORG` (original).
|
|
2. Rename `power_all.ir` to `projectors.ir`
|
|
3. Copy the "new" `projectors.ir` through [QFlipper](https://flipperzero.one/update) to the `/SD Card/infrared/assets` folder.
|
|
4. Then open "Universal Remote" on your Flipper and select "Projectors".
|
|
5. Use the POWER button to send the "Power Off" command.
|
|
|
|
**NOTES:**
|
|
USE THIS WITH CAUTION!! This has the power functions for MULTIPLE DEVICES.
|
|
|
|
This is a BIG file with around 26,000 lines so this will take a while to run (5-6 mins).
|
|
|
|
Pressing anything other than the Power button will probably give you an error. (CH+/-, MUTE, VOL+/- WILL NOT WORK WITH power_off.ir!)
|