diff --git a/README_NEW.md b/README_NEW.md
deleted file mode 100644
index c6cff4fe..00000000
--- a/README_NEW.md
+++ /dev/null
@@ -1,2642 +0,0 @@
- Select a Proxmox Helper
-
- Always remember to use due diligence when sourcing scripts and automation tasks from third-party sites.
-
-
-
- Proxmox Tools
-⬇__________________________________________________________________________________________
-
- Proxmox VE 7 Post Install
-
-
-
- Proxmox VE 7 Post Install
-
-The script will give options to Disable the Enterprise Repo, Add/Correct PVE7 Sources, Enable the No-Subscription Repo, Add Test Repo, Disable Subscription Nag, Update Proxmox VE and Reboot PVE.
-
-Run the following in the Proxmox Shell. ⚠️ **PVE7 ONLY**
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/post-pve-install.sh)"
-```
-
-It's recommended to answer `y` to all options.
-
-____________________________________________________________________________________________
-
-
-
-
- Proxmox Kernel Clean
-
-
-
-Proxmox Kernel Clean
-
-Cleaning unused kernel images is not only good because of a reduced grub menu, but also gains some disk space.
-
-Run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/kernel-clean.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Proxmox Edge Kernel Tool
-
-
-
-Proxmox Edge Kernel Tool
-
-Proxmox [Edge Kernels](https://github.com/fabianishere/pve-edge-kernel) are custom Linux Kernels for Proxmox VE 7. Keeping up with new Kernel releases instead of LTS
-
-Run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/edge-kernel.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Proxmox CPU Scaling Governor
-
-
-
-Proxmox CPU Scaling Governor
-
-CPU Scaling Governor enables the operating system to scale the CPU frequency up or down in order to save power or improve performance.
-
-[Generic Scaling Governors](https://www.kernel.org/doc/html/latest/admin-guide/pm/cpufreq.html?#generic-scaling-governors)
-
-Run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/scaling-governor.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Proxmox LXC Updater
-
-
-
-Proxmox LXC Updater
-
-Update All LXC's Fast & Easy
-
-Run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/update-lxcs.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Proxmox Dark Theme
-
-
-
- Proxmox Discord Dark Theme
-
-A dark theme for the Proxmox Web UI by [Weilbyte](https://github.com/Weilbyte/PVEDiscordDark)
-
-Run the following in the Proxmox Shell.
-
-```yaml
-bash <(curl -s https://raw.githubusercontent.com/Weilbyte/PVEDiscordDark/master/PVEDiscordDark.sh ) install
-```
-
-To uninstall the theme, simply run the script with the `uninstall` command.
-
-____________________________________________________________________________________________
-
-
-
-
- Proxmox Backup Server Post Install
-
-
-
- Proxmox Backup Server Post Install
-
-The script will give options to Disable the Enterprise Repo, Add/Correct PBS Sources, Enable the No-Subscription Repo, Add Test Repo, Disable Subscription Nag, Update Proxmox Backup Server and Reboot PBS.
-
-Run the following in the Proxmox Shell. ⚠️ **Proxmox Backup Server ONLY**
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/post-pbs-install.sh)"
-```
-
-It's recommended to answer `y` to all options.
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Home Assistant
-⬇__________________________________________________________________________________________
-
-
- Home Assistant OS VM
-
-
-
- Home Assistant OS VM
- Option to create VM using Stable, Beta, Dev or Latest Image
-
-The script automates the manual process of finding, downloading and extracting the Official KVM (qcow2) disk image provided by the Home Assistant Team, creating a VM with user defined settings, importing and attaching the disk, setting the boot order and starting the VM. No hidden (kpartx, unzip, ect...) installs of any kind. Supports lvmthin, zfspool, nfs, dir and btrfs storage types.
-
-To create a new Proxmox Home Assistant OS VM, run the following in the Proxmox Shell
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/vm/haos-vm-v4.sh)"
-```
-⚡ Default Settings: 4GB RAM - 32GB Storage - 2vCPU - Stable Image⚡
-
-After the script completes, click on the VM, then on the **_Summary_** tab to find the VM IP.
-
-**Home Assistant Interface - IP:8123**
-
-____________________________________________________________________________________________
-
-
-
-
- PiMox HAOS VM
-
-
-
- PiMox HAOS VM
- Option to create VM using Stable, Beta or Dev Image
-
-The script automates the manual process of finding, downloading and extracting the aarch64 (qcow2) disk image provided by the Home Assistant Team, creating a VM with user defined settings, importing and attaching the disk, setting the boot order and starting the VM.
-
-To create a new PiMox HAOS VM, run the following in the Proxmox Shell
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/vm/pimox-haos-vm-v4.sh)"
-```
-⚡ Default Settings: 4GB RAM - 32GB Storage - 2vCPU - Stable Image⚡
-
-After the script completes, click on the VM Console to find the Home Assistant IP.
-
-**Home Assistant Interface - IP:8123**
-
-____________________________________________________________________________________________
-
-
-
-
- Home Assistant Container LXC
-
-
-
-
- Home Assistant Container LXC
-
-A standalone container-based installation of Home Assistant Core
-
-🛈 *If the LXC is created Privileged, the script will automatically set up USB passthrough.*
-
-To create a new Proxmox Home Assistant Container LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homeassistant-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 16GB Storage - 2vCPU ⚡
-
-**Home Assistant Interface - IP:8123**
-
-**Portainer Interface - IP:9000**
-
-⚙️ **Path to HA /config**
-```yaml
-/var/lib/docker/volumes/hass_config/_data
- ```
-⚙️ **To Edit the HA configuration.yaml** (Recommend Using File Browser)
-
-Run in the LXC console
-```yaml
-nano /var/lib/docker/volumes/hass_config/_data/configuration.yaml
-```
-Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
-
-⚙️ **Copy Data From a Existing Home Assistant LXC to another Home Assistant LXC**
-
-Run in the Proxmox Shell
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/ha-copy-data.sh)"
- ```
-
-⚙️ **To Install HACS:**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/hacs.sh)"
-```
-After install, reboot Home Assistant and **clear browser cache** then Add HACS integration.
-
-
-⚙️ [**Update Menu**](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/update-menu.png)
-
-Run in the LXC console
-```yaml
-./update
-```
-____________________________________________________________________________________________
-
-
-
- Home Assistant Core LXC
-
-
-
- Home Assistant Core LXC
-
-A standalone installation of Home Assistant Core
-
-🛈 *If the LXC is created Privileged, the script will automatically set up USB passthrough.*
-
-To create a new Proxmox Home Assistant Core LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homeassistant-core-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 8GB Storage - 2vCPU ⚡
-
-⚠️ Initialize Home Assistant-Core (Only required once)
-
-Run in the LXC console
-```yaml
-cd /srv/homeassistant && python3 -m venv . && source bin/activate && hass
-```
-
-***Home Assistant Interface - IP:8123***
-
-⚙️ **Edit the HA configuration.yaml**
-
-Run in the LXC console
-```yaml
-nano .homeassistant/configuration.yaml
-```
-Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
-
-⚙️ **Install HACS:**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/hacs-core.sh)"
-```
-After install, reboot Home Assistant and **clear browser cache** then Add HACS integration.
-
-⚙️ **Update Home Assistant**
-
-Run in the LXC console
-```yaml
-systemctl stop homeassistant.service && source /srv/homeassistant/bin/activate && pip3 install --upgrade homeassistant && systemctl start homeassistant.service && exit
-```
-____________________________________________________________________________________________
-
-
-
- Podman Home Assistant Container LXC
-
-
-![]()
![]()
-
- Podman Home Assistant Container LXC
-A standalone container-based installation of Home Assistant Core
-
-⚠️ Podman seems to need a privileged LXC
-
-To create a new Proxmox Podman Home Assistant Container LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/podman-homeassistant-v4.sh)"
-```
-⚡ Default Settings: 2GB RAM - 16GB Storage - 2vCPU ⚡
-
-**Home Assistant Interface - IP:8123**
-
-**Yacht Interface - IP:8000**
-
-⚙️ **Path to HA /config**
-```yaml
-/var/lib/containers/storage/volumes/hass_config/_data
- ```
-⚙️ **To edit the HA configuration.yaml**
-
-Run in the LXC console
-```yaml
-nano /var/lib/containers/storage/volumes/hass_config/_data/configuration.yaml
-```
-Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
-
-⚙️ **Copy Data From a Existing Home Assistant LXC to a Podman Home Assistant LXC**
-
-Run in the Proxmox Shell
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/ha-copy-data-podman.sh)"
- ```
-
-⚙️ **To allow USB device passthrough:**
-
-Run in the Proxmox Shell. (**replace `106` with your LXC ID**)
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/usb-passthrough.sh)" -s 106
-```
-
-Reboot the LXC to apply the changes
-
-⚙️ **To Install HACS:**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/podman_hacs.sh)"
-```
-After install, reboot Home Assistant and **clear browser cache** then Add HACS integration.
-
-⚙️ **Initial Yacht Login**
-
-**username**
- ```yaml
- admin@yacht.local
- ```
- **password**
- ```yaml
- pass
- ```
-
-____________________________________________________________________________________________
-
-⬆__________________________________________________________________________________________
-
-
-
- Automation
-⬇__________________________________________________________________________________________
-
-
- ioBroker LXC
-
-
-
- ioBroker LXC
-
-[ioBroker](https://www.iobroker.net/#en/intro) is an open source automation platform.
-
-To create a new Proxmox ioBroker LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/iobroker-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**ioBroker Interface - IP:8081**
-
-⚙️ **To Update ioBroker**
-
-```yaml
-update from the ioBroker UI
-```
-
-____________________________________________________________________________________________
-
-
-
-
- openHAB LXC
-
-
-
- openHAB LXC
-
-[openHAB](https://www.openhab.org/), a vendor and technology agnostic open source automation software for your home.
-
-To create a new Proxmox openHAB LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/openhab-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**openHAB Interface - IP:8080**
-
-⚙️ **To Update openHAB**
-
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Homebridge LXC
-
-
-
- Homebridge LXC
-
-[Homebridge](https://homebridge.io/) allows you to integrate with smart home devices that do not natively support HomeKit
-
-To create a new Proxmox Homebridge LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homebridge-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡
-
-**Homebridge Interface - IP:8581**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- admin
- ```
-Config File Path `/var/lib/homebridge/config.json`
-
-Storage Path `/var/lib/homebridge`
-
-Restart Command `sudo hb-service restart`
-
-Stop Command `sudo hb-service stop`
-
-Start Command `sudo hb-service start`
-
-View Logs Command `sudo hb-service logs`
-
-Systemd Service File `/etc/systemd/system/homebridge.service`
-
-Systemd Env File `/etc/default/homebridge`
-
-⚙️ **To Update Homebridge**
-
-```yaml
-Update from the Homebridge UI
-```
-
- ___________________________________________________________________________________________
-
-
-
-
-
-
- ESPHome LXC
-
-
-
- ESPHome LXC
-
-[ESPHome](https://esphome.io/) is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
-
-To create a new Proxmox ESPHome LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/esphome-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-**ESPHome Interface - IP:6052**
-
-⚙️ **To Update ESPHome**
-
-Run in the LXC console
-```yaml
-pip3 install esphome --upgrade
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Node-Red LXC
-
-
-
- Node-Red LXC
-
-[Node-RED](https://nodered.org/) is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways.
-
-To create a new Proxmox Node-RED LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/node-red-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡
-
-**Node-Red Interface - IP:1880**
-
-⚙️ **To Restart Node-Red:**
-
-Run in the LXC console
-```yaml
-systemctl restart nodered
-```
-
-⚙️ **To Update Node-Red:**
-
-Run in the LXC console (Restart after update)
-```yaml
-npm install -g --unsafe-perm node-red
-```
-
-⚙️ **To Install Node-Red Themes** ⚠️ **Backup your flows before running this script!!**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/node-red-themes.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- n8n LXC
-
-
-
- n8n LXC
-
-[n8n](https://n8n.io/) is an extendable workflow automation tool which enables you to connect anything to everything.
-
-To create a new Proxmox n8n LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/n8n-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 3GB Storage - 2vCPU ⚡
-
-**n8n Interface: IP:5678**
-
-⚙️ **To Update n8n**
-
-```yaml
-npm update -g n8n
-```
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- MQTT
-⬇__________________________________________________________________________________________
-
-
- MQTT LXC
-
-
-
- MQTT LXC
-
-[Eclipse Mosquitto](https://mosquitto.org/) is an open source message broker that implements the MQTT protocol
-
-To create a new Proxmox MQTT LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/mqtt-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-Mosquitto comes with a password file generating utility called mosquitto_passwd.
-```yaml
-sudo mosquitto_passwd -c /etc/mosquitto/passwd
-```
-Password: < password >
-
-Create a configuration file for Mosquitto pointing to the password file we have just created.
-```yaml
-sudo nano /etc/mosquitto/conf.d/default.conf
-```
-This will open an empty file. Paste the following into it.
-```yaml
-allow_anonymous false
-persistence true
-password_file /etc/mosquitto/passwd
-listener 1883
-```
-Save and exit the text editor with "Ctrl+O", "Enter" and "Ctrl+X".
-
-Now restart Mosquitto server.
-```yaml
-sudo systemctl restart mosquitto
-```
-
-⚙️ **To Update MQTT:**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-
-
- EMQX LXC
-
-
-
-
- EMQX LXC
-
-[EMQX](https://www.emqx.io/) is an Open-source MQTT broker with a high-performance real-time message processing engine, powering event streaming for IoT devices at massive scale.
-
-To create a new Proxmox EMQX LXC, run the following in the Proxmox Shell.
-
-```yaml
- bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/emqx-v4.sh)"
-```
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-
-**EMQX Interface - IP:18083**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- public
- ```
-⚙️ **Setup**
-
-Access Control ➡ Authentication ➡ Create ➡ Next ➡ Next ➡ Create ➡ Users ➡ Add ➡ Username / Password (to authenicate with MQTT) ➡ Save. You're now ready to enjoy a high-performance MQTT Broker.
-
-⚙️ **To Update EMQX**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-
- ____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
-
- Database
-⬇__________________________________________________________________________________________
-
-
- Mariadb LXC
-
-
-
- Mariadb LXC
- Option to Install Adminer
-
-[MariaDB](https://mariadb.org/) is a community-developed, commercially supported fork of the MySQL relational database management system.
-
-To create a new Proxmox Mariadb LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/mariadb-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡
-
-To enable MariaDB to listen to remote connections, you need to edit your defaults file. To do this, open the console in your MariaDB lxc:
-```yaml
-nano /etc/mysql/my.cnf
-```
-Un-comment `port =3306`
-Save and exit the editor with "Ctrl+O", "Enter" and "Ctrl+X".
-
-```yaml
-nano /etc/mysql/mariadb.conf.d/50-server.cnf
-```
-Comment `bind-address = 127.0.0.1`
-Save and exit the editor with "Ctrl+O", "Enter" and "Ctrl+X".
-
-For new MariaDB installations, the next step is to run the included security script. This script changes some of the less secure default options. We will use it to block remote root logins and to remove unused database users.
-
-Run the security script:
-```yaml
-sudo mysql_secure_installation
-```
-Enter current password for root (enter for none): `enter`
-
-Switch to unix_socket authentication [Y/n] `y`
-
-Change the root password? [Y/n] `n`
-
-Remove anonymous users? [Y/n] `y`
-
-Disallow root login remotely? [Y/n] `y`
-
-Remove test database and access to it? [Y/n] `y`
-
-Reload privilege tables now? [Y/n] `y`
-
-We will create a new account called admin with the same capabilities as the root account, but configured for password authentication.
-```yaml
-sudo mysql
-```
-Prompt will change to ```MariaDB [(none)]>```
-
-Create a new local admin (Change the username and password to match your preferences)
-```yaml
-CREATE USER 'admin'@'localhost' IDENTIFIED BY 'password';
-```
-Give local admin root privileges (Change the username and password to match above)
-```yaml
-GRANT ALL ON *.* TO 'admin'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION;
-```
-
-Now, we'll give the user admin root privileges and password-based access that can connect from anywhere on your local area network (LAN), which has addresses in the subnet 192.168.100.0/24. This is an improvement because opening a MariaDB server up to the Internet and granting access to all hosts is bad practice.. Change the **_username_**, **_password_** and **_subnet_** to match your preferences:
-```yaml
-GRANT ALL ON *.* TO 'admin'@'192.168.100.%' IDENTIFIED BY 'password' WITH GRANT OPTION;
-```
-Flush the privileges to ensure that they are saved and available in the current session:
-```yaml
-FLUSH PRIVILEGES;
-```
-Following this, exit the MariaDB shell:
-```yaml
-exit
-```
-Log in as the new database user you just created:
-```yaml
-mysql -u admin -p
-```
-Create a new database:
-```yaml
-CREATE DATABASE homeassistant;
-```
-Following this, exit the MariaDB shell:
-```yaml
-exit
-```
-⚠️ Reboot the lxc
-
-Checking status.
-```yaml
-sudo systemctl status mariadb
-```
-Change the recorder: `db_url:` in your HA configuration.yaml
-
-Example:
-```yaml
-recorder:
- db_url: mysql://admin:password@192.168.100.26:3306/homeassistant?charset=utf8mb4
-```
-
-⚙️ **To Update Mariadb:**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-⚙️ [**Adminer**](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/adminer.png) (formerly phpMinAdmin) is a full-featured database management tool
-
- `http://your-mariadb-lxc-ip/adminer/`
-
-____________________________________________________________________________________________
-
-
-
-
- PostgreSQL LXC
-
-
-
- PostgreSQL LXC
- Option to Install Adminer
-
-[PostgreSQL](https://www.postgresql.org/), also known as Postgres, is a free and open-source relational database management system emphasizing extensibility and SQL compliance.
-
-To create a new Proxmox PostgreSQL LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/postgresql-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡
-
-To make sure our PostgreSQL is secured with a strong password, set a password for its system user and then change the default database admin user account
-
-Change user password
-```yaml
-passwd postgres
-```
-Login using Postgres system account
-
-```yaml
-su - postgres
-```
-Now, change the Admin database password
-```yaml
-psql -c "ALTER USER postgres WITH PASSWORD 'your-password';"
-```
-Create a new user.
-```yaml
-psql
-```
-```yaml
-CREATE USER admin WITH PASSWORD 'your-password';
-```
-Create a new database:
-```yaml
-CREATE DATABASE homeassistant;
-```
-Grant all rights or privileges on created database to the user
-```yaml
-GRANT ALL ON DATABASE homeassistant TO admin;
-```
-To exit psql
-```yaml
-\q
-```
-Then type exit to get back to root
-
-Change the recorder: `db_url:` in your HA configuration.yaml
-
-Example:
-```yaml
-recorder:
- db_url: postgresql://admin:your-password@192.168.100.20:5432/homeassistant?client_encoding=utf8
-```
-⚙️ **To Update PostgreSQL**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-⚙️ [**Adminer**](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/adminer.png) (formerly phpMinAdmin) is a full-featured database management tool
-
- `http://your-PostgreSQL-lxc-ip/adminer/`
-
-____________________________________________________________________________________________
-
-
-
-
- InfluxDB LXC
-
-
-
- InfluxDB LXC
-
- Options to Install InfluxDB v1 or v2 and Telegraf
-
-[InfluxDB](https://www.influxdata.com/) is an open-source time series database developed by the company InfluxData.
-
-[Telegraf](https://www.influxdata.com/time-series-platform/telegraf/) is an open source plugin-driven server agent for collecting and reporting metrics.
-
-To create a new Proxmox InfluxDB LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/influxdb-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-⚙️ **InfluxDB Configuration**
-
-Run in the LXC console
-```yaml
-nano /etc/influxdb/influxdb.conf
-```
-
-⚙️ **Telegraf Configuration**
-
-Run in the LXC console
-```yaml
-nano /etc/telegraf/telegraf.conf
-```
-
-⚙️ **To Update InfluxDB/Telegraf**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Zigbee - Zwave
-⬇__________________________________________________________________________________________
-
-
- Zigbee2MQTT LXC
-
-
-
-
-Zigbee2MQTT LXC
-
- Option to switch to Edge/dev branch
-
-[Zigbee2MQTT](https://www.zigbee2mqtt.io/) is a standalone nodejs application that connects a zigbee network to MQTT
-
-To create a new Proxmox Zigbee2MQTT LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/zigbee2mqtt-v4.sh)"
-```
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-
-⚙️ **Determine the location of your adapter**
-
-Run in the LXC console
-```yaml
-ls -l /dev/serial/by-id
-```
-Example Output: ```lrwxrwxrwx 1 root root 13 Jun 19 17:30 usb-1a86_USB_Serial-if00-port0 -> ../../ttyUSB0```
-
-
-⚙️ ⚠️ **Before you start Zigbee2MQTT you need to edit the [configuration.yaml](https://www.zigbee2mqtt.io/guide/configuration/)**
-
-Run in the LXC console
-```yaml
-nano /opt/zigbee2mqtt/data/configuration.yaml
-```
-
-Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X”
-
-Example:
-```yaml
-frontend:
- port: 9442
-homeassistant: true
-permit_join: false
-mqtt:
- base_topic: zigbee2mqtt
- server: 'mqtt://192.168.86.224:1883'
- user: usr
- password: pwd
- keepalive: 60
- reject_unauthorized: true
- version: 4
-serial:
- port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
- #adapter: deconz #(uncomment for ConBee II)
-advanced:
- pan_id: GENERATE
- network_key: GENERATE
- channel: 20
-```
-⚙️ **Zigbee2MQTT can be started after completing the configuration**
-
-Run in the LXC console
-```yaml
-cd /opt/zigbee2mqtt && npm start
-```
-⚙️ **To update Zigbee2MQTT**
-
-Run in the LXC console
- ```yaml
-cd /opt/zigbee2mqtt && bash update.sh
- ```
-⚙️ **Copy Data From a Existing Zigbee2MQTT LXC to another Zigbee2MQTT LXC**
-
-Run in the Proxmox Shell
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/z2m-copy-data.sh)"
- ```
-
-____________________________________________________________________________________________
-
-
-
-
- deCONZ LXC
-
-
-
- deCONZ LXC
-
-[deCONZ](https://www.phoscon.de/en/conbee2/software#deconz) is used to configure, control and display Zigbee networks.
-
-To create a new Proxmox deCONZ LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/deconz-v4.sh)"
-```
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-**deCONZ Interface - IP:80**
-
-⚙️ **To Update deCONZ**
-
-Run in the LXC Console
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Z-Wave JS UI LXC
-
-
-
- Z-Wave JS UI LXC
-
-[Z-Wave JS UI](https://github.com/zwave-js/zwave-js-ui#) is a fully configurable Z-Wave to MQTT Gateway and Control Panel.
-
-To create a new Proxmox Z-Wave JS UI LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/zwave-js-ui-v4.sh)"
-```
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-**Z-Wave JS UI Interface - IP:8091**
-
-⚙️ **Copy Data From a Existing Zwavejs2MQTT LXC to a Z-Wave JS UI LXC**
-
-Run in the Proxmox Shell
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/zwave-copy-data.sh)"
- ```
-⚙️ **To Update Z-Wave JS UI**
-
-Run in the LXC Console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/zwave-js-ui-update.sh)"
-```
-
-____________________________________________________________________________________________
-
-⬆__________________________________________________________________________________________
-
-
-
- Monitoring - Analytics
-⬇__________________________________________________________________________________________
-
-
- Uptime Kuma LXC
-
-
-
- Uptime Kuma LXC
-
-Uptime Kuma is a self-hosted, open source, fancy uptime monitoring and alerting system. It can monitor HTTP(s) / TCP / HTTP(s) Keyword / Ping / DNS Record / Push / Steam Game Server.
-
-To create a new Proxmox Uptime Kuma LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/uptimekuma-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 2GB Storage - 1vCPU ⚡
-
-**Uptime Kuma Interface - IP:3001**
-
-⚙️ **To Update Uptime Kuma**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/uptimekuma-update.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Prometheus LXC
-
-
-
- Prometheus LXC
-
-[Prometheus](https://prometheus.io/) is an open-source systems monitoring and alerting toolkit
-
-To create a new Proxmox Prometheus LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/prometheus-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 4GB Storage - 1vCPU ⚡
-
-**Prometheus Interface - IP:9090**
-
-⚙️ **To Update Prometheus**
-
-```yaml
-Working On
-```
-
-____________________________________________________________________________________________
-
-
-
-
-
- Grafana LXC
-
-
-
- Grafana LXC
-
-[Grafana](https://grafana.com/) is a multi-platform open source analytics and interactive visualization web application.
-
-To create a new Proxmox Grafana LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/grafana-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**Grafana Interface - IP:3000**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- admin
- ```
-
-⚙️ **To Update Grafana**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Docker
-⬇__________________________________________________________________________________________
-
-
- Docker LXC
-
-
-
- Docker LXC
- Options to Install Portainer and/or Docker Compose V2
-
-[Docker](https://www.docker.com/) is an open-source project for automating the deployment of applications as portable, self-sufficient containers.
-
-To create a new Proxmox Docker LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/docker-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 4GB Storage - 2vCPU ⚡
-
-**⚠ Run Compose V2 by replacing the hyphen (-) with a space, using docker compose, instead of docker-compose.**
-
-**Portainer Interface - IP:9000**
-
-⚙️ **To Update**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Umbrel LXC
-
-
-
- Umbrel LXC
-
-[Umbrel](https://umbrel.com/) is a beautiful personal server OS for self-hosting.
-
-
-To create a new Proxmox Umbrel LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/umbrel-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**Umbrel Interface - IP**
-
-⚙️ **To Update Umbrel**
-
-```yaml
-update from the Umbrel UI
-```
-
-____________________________________________________________________________________________
-
-
-
-
- CasaOS LXC
-
-
-
- CasaOS LXC
-
-[CasaOS](https://www.casaos.io/) is a community-based open source software focused on delivering simple home cloud experience around Docker ecosystem.
-
-
-To create a new Proxmox CasaOS LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/casaos-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**CasaOS Interface - IP**
-
-⚙️ **To Update CasaOS**
-
-```yaml
-update from the CasaOS UI
-```
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- OS
-⬇__________________________________________________________________________________________
-
-
- Debian LXC
-
-
-
- Debian LXC
- Option to select version 10 or 11
-
-To create a new Proxmox Debian (curl & sudo) LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/debian-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-⚙️ **To Update Debian**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-
-
-
- Ubuntu LXC
-
-
-
- Ubuntu LXC
- Option to select version 18.04, 20.04, 21.10 or 22.04
-
-To create a new Proxmox Ubuntu (curl & sudo) LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/ubuntu-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU - 22.04 ⚡
-
-⚙️ **To Update Ubuntu**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Server - Networking
-⬇__________________________________________________________________________________________
-
-
- Nginx Proxy Manager LXC
-
-
-
-
- Nginx Proxy Manager LXC
-
-[Nginx Proxy Manager](https://nginxproxymanager.com/) Expose your services easily and securely
-
-To create a new Proxmox Nginx Proxy Manager LXC Container, run the following in the Proxmox Shell.
-
-```yaml
- bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/nginx-proxy-manager-v4.sh)"
-```
-⚡ Default Settings: 1GB RAM - 3GB Storage - 1vCPU ⚡
-
-____________________________________________________________________________________
-
-Forward port `80` and `443` from your router to your Nginx Proxy Manager LXC IP.
-
-Add the following to your `configuration.yaml` in Home Assistant.
-```yaml
- http:
- use_x_forwarded_for: true
- trusted_proxies:
- - 192.168.100.27 ###(Nginx Proxy Manager LXC IP)###
-```
-
-**Nginx Proxy Manager Interface - IP:81**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin@example.com
- ```
- **password**
- ```yaml
- changeme
- ```
-⚙️ **To Update Nginx Proxy Manager**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/npm_update.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- UniFi Network Application LXC
-
-
-
- UniFi Network Application LXC
-
- With Local Controller Option
-
-An application designed to optimize UniFi home and business networks with ease.
-
-To create a new Proxmox UniFi Network Application LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/unifi-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**UniFi Interface - https:// IP:8443**
-
-⚙️ **To Update UniFi**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/unifi-update.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Omada Controller LXC
-
-
-
- Omada Controller LXC
-
-Omada Controller is software which is used to manage the EAP
-
-To create a new Proxmox Omada Controller LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/omada-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**Omada Interface - https:// IP:8043**
-
-`tpeap status` show status of Omada Controller
-
-`tpeap start` start Omada Controller
-
-`tpeap stop` stop Omada Controller
-
-⚙️ **To Update Omada**
-
-[#403](https://github.com/tteck/Proxmox/issues/402#issue-1328460983)
-
-____________________________________________________________________________________________
-
-
-
-
- WireGuard LXC
-
-
-
- WireGuard LXC
- With WGDashboard
-
-To create a new Proxmox WireGuard LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/wireguard-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**WGDashboard Interface - http:// IP:10086**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- admin
- ```
-
-⚙️ **Host Configuration**
-
-Run in the LXC console
- ```yaml
- nano /etc/pivpn/wireguard/setupVars.conf
- ```
- ⚙️**Add Clients**
-
- Run in the LXC console
- ```yaml
- pivpn add
- ```
-⚙️ **To Update WireGuard**
-
-Run in the LXC console
- ```yaml
-apt update && apt upgrade -y
-```
-____________________________________________________________________________________________
-
-
-
-
-
- MeshCentral LXC
-
-
-
- MeshCentral LXC
-
-[MeshCentral](https://meshcentral.com/info/) is a full computer management web site. With MeshCentral, you can run your own web server to remotely manage and control computers on a local network or anywhere on the internet.
-
-To create a new Proxmox MeshCentral LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/meshcentral-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**MeshCentral Interface - http:// IP**
-
-⚙️ **To Update MeshCentral**
-
-```yaml
-Update from the MeshCentral UI
-```
-____________________________________________________________________________________________
-
-
-
-
- Tailscale
-
-
-
- Tailscale
-
-[Tailscale](https://tailscale.com/) Creates a secure network between your servers, computers, and cloud instances. Even when separated by firewalls or subnets, Tailscale just works.
-
-To Install Talescale on an existing LXC, run the following in the Proxmox Shell (replace `106` with your LXC ID).
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/add-tailscale-lxc.sh)" -s 106
-```
-After the script finishes, reboot the LXC then run `tailscale up` in the LXC console
-
-[**Tailscale Login**](https://login.tailscale.com/start)
-
-⚙️ **To Update Tailscale**
-
-Run in the LXC console
- ```yaml
-apt update && apt upgrade -y
-```
-
-___________________________________________________________________________________________
-
-
-
-
- CrowdSec
-
-
-
- CrowdSec
-
-To Install CrowdSec, ⚠️ run the following in the LXC console.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/crowdsec.sh)"
-```
-
-[CrowdSec](https://crowdsec.net/) is a free, open-source and collaborative IPS. Analyze behaviors, respond to attacks & share signals across the community.
-
-[**Control center for your CrowdSec machines.**](https://app.crowdsec.net/product-tour)
-
-___________________________________________________________________________________________
-
-
-
-
- Keycloak LXC
-
-
-
- Keycloak LXC
-
-To create a new Proxmox Keycloak LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/keycloak-v4.sh)"
-```
-
-[Keycloak](https://www.keycloak.org/) is an Open Source Identity and Access Management solution for modern Applications and Services.
-
-**Keycloak Interface - http:// IP:8080** (First start can take a few minutes)
-
-⚙️ **Initial Login**
-
-The initial admin user can be added manually using the web frontend when accessed from localhost or automatically using environment variables.
-
-To add the initial admin user using environment variables, set `KEYCLOAK_ADMIN` for the initial admin username and `KEYCLOAK_ADMIN_PASSWORD` for the initial admin password.
-
-First, stop Keycloak
-```yaml
-systemctl stop keycloak.service
-```
-then start Keycloak by coping & pasting the following (only needed once)
-```yaml
-cd /opt/keycloak
-export KEYCLOAK_ADMIN=admin
-export KEYCLOAK_ADMIN_PASSWORD=changeme
-
-bin/kc.sh start-dev
-```
-⚙️ **To Update Keycloak**
-
-```yaml
-working On
-```
-___________________________________________________________________________________________
-
-
-
-
- Mikrotik RouterOS VM
-
-
-
- Mikrotik RouterOS VM
-
-[Mikrotik RouterOS](https://wiki.mikrotik.com/wiki/Manual:TOC) can be installed on a PC and will turn it into a router with all the necessary features - routing, firewall, bandwidth management, wireless access point, backhaul link, hotspot gateway, VPN server and more.
-
-To create a new Proxmox Mikrotik RouterOS VM, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/vm/mikrotik-routeros-v4.sh)"
-```
-Setup is done via VM console.
-
-⚡ Default Settings: 1GB RAM - 2GB Storage - 1CPU ⚡
-
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Media - Photo
-⬇__________________________________________________________________________________________
-
-
- Plex Media Server LXC
-
-
-
- Plex Media Server LXC
- With Hardware Acceleration Support
-To create a new Proxmox Plex Media Server LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/plex-v4.sh)"
-```
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**Plex Media Server Interface - IP:32400/web**
-
-⚙️ **To Update Plex Media Server:**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-⚙️ **Copy Data From a Existing Plex Media Server LXC to another Plex Media Server LXC**
-
-Run in the Proxmox Shell
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/pms-copy-data.sh)"
- ```
-
-____________________________________________________________________________________________
-
-
-
-
- Emby Media Server LXC
-
- Emby Media Server LXC
-
-[Emby](https://emby.media/) brings together your personal videos, music, photos, and live television.
-
-To create a new Proxmox Emby Media Server LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/emby-v4.sh)"
-```
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**Emby Media Server Interface - IP:8096**
-
-⚙️ **To Update Emby**
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/emby-update.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Jellyfin Media Server LXC
-
- Jellyfin Media Server LXC
-
-[TurnKey has a LXC CT for Jellyfin](https://www.turnkeylinux.org/mediaserver)
-
-To create a new Proxmox Jellyfin Media Server LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/jellyfin-v4.sh)"
-```
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**Jellyfin Media Server Interface - IP:8096**
-
-FFmpeg path: `/usr/lib/jellyfin-ffmpeg/ffmpeg`
-
-⚙️ **To Update Jellyfin Media Server**
-
-Run in the LXC console
-```yaml
-apt update && apt upgrade -y
-```
-____________________________________________________________________________________________
-
-
-
-
- NextCloudPi LXC
-
-
-
-NextCloudPi LXC
-
-[NextCloudPi LXC](https://github.com/nextcloud/nextcloudpi#features) is the most popular self-hosted collaboration solution.
-
-To create a new Proxmox NextCloudPi LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/nextcloudpi-v4.sh)"
-```
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-❗1️. Set nc trusted domains
-
-Run in the LXC console
-```
-sudo ncp-config
-```
-Go to config ➡ nc-trusted-domains, add `0.0.0.0` or a static NextCloudPi IP
-
-Get back to the command prompt, and restart Apache2 `sudo service apache2 restart`
-
-❗2. **NextCloudPi Interface - https:// IP/**
-
-____________________________________________________________________________________________
-
-
-
-
- OpenMediaVault LXC
-
-
-
- OpenMediaVault LXC
-
-[OpenMediaVault](https://www.openmediavault.org/) is the next generation network attached storage (NAS) solution based on Debian Linux.
-
-To create a new Proxmox OpenMediaVault LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/omv-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-**OpenMediaVault Interface - IP**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- openmediavault
- ```
-
-____________________________________________________________________________________________
-
-
-
-
- Navidrome LXC
-
-
-
- Navidrome LXC
-
-[Navidrome](https://www.navidrome.org/) allows you to enjoy your music collection from anywhere, by making it available through a modern Web UI and through a wide range of third-party compatible mobile apps, for both iOS and Android devices.
-
-To create a new Proxmox Navidrome LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/navidrome-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡
-
-To change Navidrome music folder path, edit: `/var/lib/navidrome/navidrome.toml`
-
-**Navidrome Interface - IP:4533**
-
-⚙️ **To Update Navidrome**
-
-Run in the LXC Console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/navidrome-update.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- PhotoPrism LXC
-
-
-
- PhotoPrism LXC
-
-[PhotoPrism](https://photoprism.app/) is an AI-powered app for browsing, organizing & sharing your photo collection.
-
-To create a new Proxmox PhotoPrism LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/photoprism-v4.sh)"
-```
-The script builds from source, which takes time and resources. After the build, the script will automatically set resources to Normal Settings.
-⚡ Build Settings: 3GB RAM - 8GB Storage - 2vCPU ⚡
-⚡ Normal Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**PhotoPrism Interface - IP:2342**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- changeme
- ```
-[PhotoSync](https://www.photosync-app.com/home.html)
-
-⚙️ **To Update or Change Branch**
-
-Run in the LXC Console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/photoprism-update.sh)"
-```
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Ad Blocker - DNS
-⬇__________________________________________________________________________________________
-
-
- Pi-hole LXC
-
-
-
- Pi-hole LXC
-
-[Pi-hole](https://pi-hole.net/) is a Linux network-level advertisement and Internet tracker blocking application which acts as a DNS sinkhole and optionally a DHCP server.
-
-To create a new Proxmox Pi-hole LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/pihole-v4.sh)"
-```
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-⚠️ **Reboot Pi-hole LXC after install**
-
-**Pi-hole Interface - http:// IP/admin**
-
-⚙️ **To set your password:**
-
-Run in the LXC console
-
-```yaml
-pihole -a -p
-```
-____________________________________________________________________________________________
-
-
-
-
- Technitium DNS LXC
-
-
-
- Technitium DNS LXC
-An open source authoritative as well as recursive DNS server
-
-To create a new Proxmox Technitium DNS LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/technitiumdns-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**Technitium DNS Interface - IP:5380**
-
-⚙️ **To Update Technitium DNS**
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/technitiumdns-update.sh)"
-```
-__________________________________________________________________________________________
-
-
-
-
-
- AdGuard Home LXC
-
-
-
- AdGuard Home LXC
-
-To create a new Proxmox AdGuard Home LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/adguard-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**AdGuard Home Setup Interface - IP:3000 (After Setup use only IP)**
-
- (For the Home Assistant Integration, use port `80` not `3000`)
-
-⚙️ **To Update Adguard**
-
-```yaml
-Update from the Adguard UI
-```
-__________________________________________________________________________________________
-
-
-
-
- Blocky LXC
-
-
-
- Blocky LXC
-
-[Blocky](https://0xerr0r.github.io/blocky/) is a DNS proxy and ad-blocker for the local network written in Go. 🚨 For Advanced Users. No UI.
-
-To create a new Proxmox Blocky LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/blocky-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-
-⚙️ **Blocky Config Path**
-
-```yaml
-/opt/blocky/config.yml
-```
-__________________________________________________________________________________________
-
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Document - Notes
-⬇__________________________________________________________________________________________
-
-
- Paperless-ngx LXC
-
-
-
- Paperless-ngx LXC
-
-[Paperless-ngx](https://paperless-ngx.readthedocs.io/en/latest/#) is a document management system that transforms your physical documents into a searchable online archive so you can keep, well, less paper.
-
-To create a new Proxmox Paperless-ngx LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/paperless-ngx-v4.sh)"
-```
-
-⚡ Default Settings: 2048MiB RAM - 4GB Storage - 2vCPU ⚡
-
-**Paperless-ngx Interface - IP:8000**
-
-🛈 A paperless.creds file is in root home directory that contains the usernames and passwords.
-
-Run in the LXC Console
-```yaml
-cat paperless.creds
-```
-
-⚙️ **To Update Paperless-ngx**
-
-Run in the LXC Console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/paperless-ngx-update.sh)"
-```
-____________________________________________________________________________________________
-
-
-
-
- Trilium LXC
-
-
-
- Trilium LXC
-
-[Trilium](https://github.com/zadam/trilium#trilium-notes) is a hierarchical note taking application with focus on building large personal knowledge bases.
-
-To create a new Proxmox Trilium LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/trilium-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**Trilium Interface - IP:8080**
-
-⚙️ **To Update Trilium**
-
-Run in the LXC Console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/trilium-update.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Wiki.js LXC
-
-
-
- Wiki.js LXC
-
-[Wiki.js](https://js.wiki/) is a modern, lightweight and powerful wiki app built on NodeJS.
-
-To create a new Proxmox Wiki.js LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/wikijs-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**Wiki.js Interface - IP:3000**
-
-____________________________________________________________________________________________
-
-
-
-
- NocoDB LXC
-
-
-
- NocoDB LXC
-
-[NocoDB](https://www.nocodb.com/) is an open source #NoCode platform that turns any database into a smart spreadsheet. Airtable Alternative.
-
-To create a new Proxmox NocoDB LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/nocodb-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡
-
-**NocoDB Interface - IP:8080/dashboard**
-
-⚙️ **To Update NocoDB**
-
-Run in the LXC console
-```yaml
-cd /opt/nocodb && npm run upgrade
-```
-
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
- Dashboards
-⬇__________________________________________________________________________________________
-
-
- Heimdall Dashboard LXC
-
-
-
- Heimdall Dashboard LXC
-
-[Heimdall Application Dashboard](https://camo.githubusercontent.com/bcfd4f74c93b25bea7b14eacbafd649206bf754a3d4b596329968f0ee569cf3c/68747470733a2f2f692e696d6775722e636f6d2f4d72433451704e2e676966) is a dashboard for all your web applications. It doesn't need to be limited to applications though, you can add links to anything you like.
-
-To create a new Proxmox Heimdall Dashboard LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/heimdalldashboard-v4.sh)"
-```
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**Heimdall Dashboard Interface - IP:7990**
-
-⚙️ **To Update Heimdall Dashboard**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/heimdalldashboard-all-update.sh)"
-```
-
-__________________________________________________________________________________________
-
-
-
-
- Homepage LXC
-
-
-
- Homepage LXC
-
-[Homepage](https://github.com/benphelps/homepage) is a self-hosted dashboard.
-
-To create a new Proxmox Homepage LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homepage-v4.sh)"
-```
-
-⚡ Default Settings: 1GB RAM - 3GB Storage - 2vCPU ⚡
-
-[Configuration](https://github.com/benphelps/homepage/wiki) (bookmarks.yaml, services.yaml, widgets.yaml) path: `/opt/homepage/config/`
-
-**Homepage Interface - IP:3000**
-
-⚙️ **To Update Homepage**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/homepage-update.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Dashy LXC
-
-
-
- Dashy LXC
-
-Dashy helps you organize your self-hosted services by making them accessible from a single place
-
-To create a new Proxmox Dashy LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/dashy-v4.sh)"
-```
-⚡ Default Settings: 2GB RAM - 3GB Storage - 2vCPU ⚡
-
-**Dashy Interface - IP:4000**
-
-After getting everything setup the way you want in interactive mode and saved to disk, you have to go into update configuration and rebuild application.
-
-⚙️ **To Update Dashy**
-
-Run in the LXC Console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/dashy-update.sh)"
-```
-
-__________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-
-
-
- File - Code
-⬇__________________________________________________________________________________________
-
- File Browser
-
-
-
- File Browser
-
-To Install File Browser, ⚠️ run the following in the LXC console.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/filebrowser.sh)"
-```
-
-[File Browser](https://filebrowser.org/features) is a create-your-own-cloud-kind of software where you can install it on a server, direct it to a path and then access your files through a nice web interface. Many available features!
-
-
-
-**File Browser Interface - http:// IP:8080**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- changeme
- ```
-
-⚙️ **To Update File Browser**
-
-```yaml
-curl -fsSL https://raw.githubusercontent.com/filebrowser/get/master/get.sh | bash
-```
-___________________________________________________________________________________________
-
-
-
-
- VS Code Server
-
-
-
- VS Code Server
-
-To Install VS Code Server, ⚠️ run the following in the LXC console.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/code-server.sh)"
-```
-
-[VS Code Server](https://code.visualstudio.com/docs/remote/vscode-server) is a service you can run on a remote development machine, like your desktop PC or a virtual machine (VM). It allows you to securely connect to that remote machine from anywhere through a vscode.dev URL, without the requirement of SSH.
-
-
-
-**VS Code Server Interface - http:// IP:8680**
-
-___________________________________________________________________________________________
-
-
-
-
- Webmin System Administration
-
-
-
- Webmin System Administration
-
-To Install Webmin System Administration [(Screenshot)](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/file-manager.png), ⚠️ run the following in the LXC console.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/webmin.sh)"
-```
-
-If you prefer to manage all aspects of your Proxmox LXC from a graphical interface instead of the command line interface, Webmin might be right for you.
-
-Benefits include automatic daily security updates, backup and restore, file manager with editor, web control panel, and preconfigured system monitoring with optional email alerts.
-
-
-
-**Webmin Interface - https:// IP:10000 (https)**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- root
- ```
- **password**
- ```yaml
- root
- ```
-
-⚙️ **To Update Webmin**
-
-```yaml
-Update from the Webmin UI
-```
-⚙️ **To Uninstall Webmin**
-
-Run in the LXC console
-```yaml
-bash /etc/webmin/uninstall.sh
-```
-___________________________________________________________________________________________
-
-
-
-
- Syncthing LXC
-
-
-
- Syncthing LXC
-
-[Syncthing](https://syncthing.net/) is a continuous file synchronization program. It synchronizes files between two or more computers.
-
-To create a new Proxmox Syncthing LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/syncthing-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-⚙️ For the initial start, run `syncthing --gui-address=0.0.0.0:8384` in the LXC console, then go to the LXC IP:8384 In settings set the LXC IP address under the GUI (also set the GUI Authentication User and GUI Authentication Password) and Connections tab's and save. Reboot the LXC.
-
-**Syncthing Interface - IP:8384**
-
-⚙️ **To Update Syncthing**
-
-```yaml
-apt update && apt upgrade -y
-```
-
-____________________________________________________________________________________________
-
-
-
-
- Daemon Sync Server LXC
-
-
-
- Daemon Sync Server LXC
-
-Sync files from app to server, share photos & videos, back up your data and stay secure inside local network.
-
-To create a new Proxmox Daemon Sync Server LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/daemonsync-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 8GB Storage - 1vCPU ⚡
-
-**Daemon Sync Server Interface - IP:8084**
-
-Search: `DAEMON Sync` in your favorite app store
-
-__________________________________________________________________________________________
-
-
-⬆________________________________________________________________________________________
-
-
-
-
- Misc.
-⬇________________________________________________________________________________________
-
-
- Vaultwarden LXC
-
-
-
- Vaultwarden LXC
-
-Alternative implementation of the Bitwarden server API written in Rust and compatible with upstream [Bitwarden clients](https://bitwarden.com/download/), perfect for self-hosted deployment where running the official resource-heavy service might not be ideal.
-
-To create a new Proxmox Vaultwarden LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/vaultwarden-v4.sh)"
-```
-⚠️ Vaultwarden needs to be behind a proxy (Nginx Proxy Manager) to obtain HTTPS and to allow clients to connect.
-
-The script builds from source, which takes time and resources. After the build, the script will automatically set resources to Normal Settings.
-
-Expect 30+ minute install time.
-⚡ Build Settings: 3072Mib RAM - 6GB Storage - 2vCPU ⚡
-⚡ Normal Settings: 512Mib RAM - 6GB Storage - 1vCPU ⚡
-
-**Vaultwarden Interface: IP:8000**
-
-**Vaultwarden Admin Interface: IP:8000/admin**
-
-⚙️ **Vaultwarden .env file** (to find the `ADMIN_TOKEN`)
-```yaml
-cat /opt/vaultwarden/.env
-```
-
-⚙️ **To Update Vaultwarden (post 2022-05-29 installs only)**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/vaultwarden-update.sh)"
-```
-⚙️ **To Update Web-vault (any)**
-
-Run in the LXC console
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/web-vault-update.sh)"
-```
-
-____________________________________________________________________________________________
-
-
-
-
- grocy LXC
-
-
-
- grocy LXC
-
-[grocy](https://grocy.info/) is a web-based self-hosted groceries & household management solution for your home.
-
-To create a new Proxmox grocy LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/grocy-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**grocy Interface: http:// IP**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
- admin
- ```
-
-⚙️ **To Update grocy**
-
-Run in the LXC console
- ```yaml
-bash /var/www/html/update.sh
-```
-____________________________________________________________________________________________
-
-
-
-
- MagicMirror Server LXC
-
-
-
- MagicMirror Server LXC
-
-[MagicMirror²](https://docs.magicmirror.builders/) is an open source modular smart mirror platform.
-
-To create a new MagicMirror Server LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/magicmirror-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 3GB Storage - 1vCPU ⚡
-
-**MagicMirror Interface - IP:8080**
-
-⚙️ **[Configuration](https://docs.magicmirror.builders/configuration/introduction.html#configuring-your-magicmirror)**
-```yaml
-/opt/magicmirror/config/config.js
-```
-⚙️ **[Update MagicMirror](https://docs.magicmirror.builders/getting-started/upgrade-guide.html#upgrade-guide)**
-
-Run in the LXC Console
-```yaml
-cd /opt/magicmirror && git pull && npm install --only=prod --omit=dev
-```
-____________________________________________________________________________________________
-
-
-
-
- Whoogle LXC
-
-
-
- Whoogle LXC
-
-Get Google search results, but without any ads, javascript, AMP links, cookies, or IP address tracking.
-
-To create a new Proxmox Whoogle LXC, run the following in the Proxmox Shell.
-
-```yaml
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/whoogle-v4.sh)"
-```
-
-⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡
-
-**Whoogle Interface - IP:5000**
-
-⚙️ **To Update Whoogle**
-
-Run in the LXC console
-```yaml
-pip3 install whoogle-search --upgrade
-```
-____________________________________________________________________________________________
-
-
-
-
- MotionEye VMS LXC
-
-
-
- MotionEye VMS LXC
-
-To create a new Proxmox MotionEye VMS LXC, run the following in the Proxmox Shell.
-
-```
-bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/motioneye-v4.sh)"
-```
-
-⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡
-
-**MotionEye Interface - IP:8765**
-
-⚙️ **Initial Login**
-
-**username**
- ```yaml
- admin
- ```
- **password**
- ```yaml
-
- ```
-
-⚙️ **To Update MotionEye**
-
-Run in the LXC console
- ```yaml
-pip install motioneye --upgrade
-```
-____________________________________________________________________________________________
-
-
-⬆__________________________________________________________________________________________
-
-