UltraNX/config/horizon-oc/lang/zh-cn.json

{
    "Information": "信息",
    "Unknown": "未知",
    "Installed": "已安装",
    "Not Installed": "未安装",
    "Default": "默认",
    "Do Not Override": "不修改",
    "Do not override": "不修改",
    "Disabled": "已禁用",
    "Enabled": "已启用",
    "Enabled (Default)": "已启用 (默认)",
    "Enable": "启用",
    "Fatal error": "致命错误",
    "Could not connect to hoc-clk sysmodule.\\n\\n": "无法连接到 hoc-clk 系统模块。\\n\\n",
    "Please make sure everything is\\n\\n": "请确保所有内容均已\\n\\n",
    "correctly installed and enabled.": "正确安装并启用。",

    "Edit App Profile": "编辑应用配置",
    "Edit Global Profile": "编辑全局配置",
    "Temporary Overrides": "临时配置",
    "Temporary Overrides ": "临时配置 ",
    "  Reset": "  重置",
    "Settings": "设置",
    "About": "关于",
    "Credits": "致谢",

    "Application changed\\n\\n": "应用已变更\\n\\n",
    "The running application changed\\n\\n": "正在运行的应用已变更\\n\\n",
    "while editing was going on.": "编辑过程中发生变更。",

    "Sleep Mode": "睡眠模式",
    "Stock": "原厂默认",
    "Dev OC": "开发者超频",
    "Boost Mode": "加速模式",
    "Safe Max": "安全最大值",
    "Unsafe Max": "危险最大值",
    "Absolute Max": "绝对最大值",
    "Handheld Safe Max": "掌机模式安全最大值",

    "General Settings": "通用设置",
    "Governor Settings": "调频器设置",
    "Safety Settings": "安全设置",
    "Save KIP Settings": "保存 KIP 设置",
    "RAM Settings": "内存设置",
    "CPU Settings": "CPU 设置",
    "GPU Settings": "GPU 设置",
    "Display Settings": "显示设置",
    "Experimental Settings": "实验性设置",
    "Experimental": "实验性功能",

    " Settings marked in blue": "蓝色标注的设置",
    "don't require a reboot to apply!": "无需重启即可应用！",
    "You can also press  to show": "也可按  查看",
    "information about each setting.": "每项设置的说明。",

    " Experimental Settings are incomplete ": "实验性设置尚未完成",
    "and may not work correctly or at all!": "且可能无法正常工作！",
    "Here be dragons!": "此处有险！",

    "RAM Voltage Display Mode": "内存电压显示模式",
    "RAM Display Unit": "内存显示单位",
    "Polling Interval": "刷新间隔",

    "GPU Scheduling Override Method": "GPU 调度覆盖方式",
    "GPU Scheduling Override": "GPU 调度修改",
    "GPU Boot Volt": "GPU 启动电压",
    "GPU Boot Voltage": "GPU 启动电压",
    "Memory Frequency Measurement Mode": "内存频率测量模式",
    " Overriding the charge current": "修改充电电流",
    "can be dangerous and may cause": "存在风险，可能导致",
    "damage to your battery or charger!": "电池或充电器损坏！",
    "Charge Current Override": "充电电流修改",
    "Display Color Preset": "显示颜色预设",
    "Basic": "基础",
    "Saturated": "饱和",
    "Washed": "淡色",
    "Natural": "自然",
    "Vivid": "鲜艳",

    "CPU Governor Minimum Frequency": "CPU 调频器最低频率",
    " Usage of unsafe display": "不安全的显示屏",
    "refresh rates may cause stress": "刷新率可能会对",
    "or damage to your display! ": "显示屏造成压力或损坏！ ",
    "Proceed at your own risk!": "操作风险自负！",
    "Max Handheld Display": "掌机模式最大显示率",
    "Max Handheld Display Hz": "掌机最大显示率 Hz",
    "Display Clock": "显示时钟",
    " Adjust the display voltage": "调整显示电压",
    "with caution to avoid damage": "请谨慎以避免损坏",
    "to your display panel! ": "显示屏面板！",
    "Display Voltage": "显示电压",

    "Thermal Throttle Limit": "温控设置",
    "Official Rating": "官方额定值",
    "TDP Threshold": "TDP 阈值",
    "Power": "电源",
    "HP Mode": "高性能模式",

    "DVB Shift": "DVB 偏移",
    "SoC Max Volt": "SoC 最大电压",
    "Step Mode": "步进模式",
    "RAM VDD2 Voltage": "内存 VDD2 电压",
    "RAM VDDQ Voltage": "内存 VDDQ 电压",
    "Voltage": "电压",
    "RAM Frequency Editor": "内存频率编辑器",
    "Ram Max Clock": "内存最大频率",
    "RAM Latency Editor": "内存延迟编辑器",
    "RAM Timing Reductions": "内存时序优化",
    "Memory Timings": "内存时序",
    "Advanced": "高级",
    "t6 tRTW Fine Tune": "t6 tRTW 微调",
    "tRTW Fine Tune": "tRTW 微调",
    "t7 tWTR Fine Tune": "t7 tWTR 微调",
    "tWTR Fine Tune": "tWTR 微调",
    "Memory Latencies": "内存延迟",
    "Read Latency": "读取延迟",
    "Write Latency": "写入延迟",
    "High speedo needed!": "需要高 Speedo 配置！",
    "3333MHz (Needs extreme Speedo/PLL)": "3333MHz (需要极限 Speedo/PLL)",
    "3366MHz (Needs extreme Speedo/PLL)": "3366MHz (需要极限 Speedo/PLL)",
    "3400MHz (Needs extreme Speedo/PLL)": "3400MHz (需要极限 Speedo/PLL)",
    "3433MHz (Needs ridiculous Speedo/PLL)": "3433MHz (需要极端 Speedo/PLL)",
    "3466MHz (Needs ridiculous Speedo/PLL)": "3466MHz (需要极端 Speedo/PLL)",
    "3500MHz (Needs ridiculous Speedo/PLL)": "3500MHz (需要极端 Speedo/PLL)",
    "JEDEC.": "JEDEC 标准。",

    "CPU Boost Clock": "CPU 超频频率",
    "CPU UV": "CPU 降压",
    "CPU Unlock": "CPU 解锁",
    "CPU VMIN": "CPU 最低电压",
    "CPU Max Voltage": "CPU 最大电压",
    "CPU Max Clock": "CPU 最大频率",
    "Extreme UV Table": "极限降压表",
    "CPU UV Table": "CPU 降压表",
    "CPU Low UV": "CPU 低压降压",
    "CPU High UV": "CPU 高压降压",
    "CPU Low VMIN": "CPU 低压最低电压",
    "CPU High VMIN": "CPU 高压最低电压",

    "No Undervolt": "不降压",
    "SLT Table": "SLT 表",
    "HiOPT Table": "HiOPT 表",
    "GPU Undervolt Table": "GPU 降压表",
    "GPU Minimum Voltage": "GPU 最低电压",
    "Calculate GPU Vmin": "计算 GPU 最低电压",
    "GPU VMIN": "GPU 最低电压",
    "GPU Maximum Voltage": "GPU 最大电压",
    "GPU Voltage Offset": "GPU 电压偏移",
    "GPU DVFS Mode": "GPU DVFS 模式",
    "GPU DVFS Offset": "GPU DVFS 偏移",
    "GPU Voltage Table": "GPU 电压表",
    "GPU Custom Table (mV)": "GPU 自定义表 (mV)",
    "Official Service": "官方服务",
    "96.6% limit": "96.6% 限制",
    "99.7% limit": "99.7% 限制",
    " Setting GPU Clocks past": " 将 GPU 频率设置超过",
    "1228MHz without a proper undervolt": "没有适当降压的 1228MHz",
    "can cause degradation or damage": "可能导致损耗或损坏",
    "to your console!": "您的主机！",
    "1075MHz without UV, 1152MHz on SLT": "1075MHz 无降压，SLT 表下 1152MHz",
    "or 1228MHz on HiOPT can cause ": "或 HiOPT 表下 1228MHz 可能导致 ",
    "permanent damage to your Switch!": "Switch 永久损坏！",
    "921MHz without UV and 960MHz on": "921MHz 无降压，SLT/HiOPT 表下 960MHz",
    "SLT or HiOPT can cause ": "可能导致 ",

    "Default (Mariko)": "默认 (Mariko)",
    "Default (Erista)": "默认 (Erista)",
    "Rating": "额定值",
    "Safe Max (Mariko)": "安全最大值 (Mariko)",
    "Safe Max (Erista)": "安全最大值 (Erista)",

    "Voltages": "电压",
    "RAM Voltage:": "内存电压:",
    "Display Voltage:": "显示电压:",
    "Temperatures": "温度",
    "PLLX Temp:": "PLLX 温度:",
    "AOTAG Temp:": "AOTAG 温度:",
    "BQ24193 Temp:": "BQ24193 温度:",
    "Normal": "正常",
    "Warm": "温热",
    "Hot": "过热",
    "Overheat": "严重过热",
    "Not Patched": "未修补",
    "Invalid": "无效",
    "RAM Bandwidth": "内存带宽",
    "RAM BW (Peak):": "RAM带宽(峰值):",
    "RAM BW (All):": "RAM带宽(全部):",
    "RAM BW (CPU):": "RAM带宽(CPU):",
    "RAM BW (GPU):": "RAM带宽(GPU):",
    "Hardware Info": "硬件信息",
    "Console Type:": "主机类型:",
    "Speedo:": "Speedo:",
    "DRAM Module: ": "DRAM 模块: ",
    "Software Info": "软件信息",
    "KIP version:": "KIP 版本:",
    "sys-dock status:": "sys-dock 状态:",
    "SaltyNX status:": "SaltyNX 状态:",
    "RR Display status:": "RR 显示状态:",
    "Wafer Position:": "晶圆位置:",
    "IDDQ:": "IDDQ:",
    "Module: ": "模块: ",
    "Board": "主板",
    "Display": "显示",

    "Developers": "开发者",
    "Contributors": "贡献者",
    "Testers": "测试者",
    "Translators": "翻译",
    "Special Thanks": "特别感谢",

    "X: %u Y: %u": "X: %u Y: %u",
    "%u.%u%u mV": "%u.%u%u mV",
    "Compiling with minimal features": "以最小功能编译",
    "THE BEER-WARE LICENSE": "啤酒软件许可协议"
}