diff --git a/README.md b/README.md
index 467bd0f..0f24421 100644
--- a/README.md
+++ b/README.md
@@ -24,7 +24,7 @@
 1. **[Atmosphere](https://github.com/Atmosphere-NX/Atmosphere)** - Atmosphère, кастомная прошивка для Nintendo Switch.
 1. **[Hekate](https://github.com/CTCaer/hekate)** - Пользовательский графический загрузчик Nintendo Switch, патчер прошивки, инструментарий и многое другое.
 1. **[Ultra Tuner](https://github.com/Ultra-NX/Ultra-Tuner)** - Пакет для Ultra Paw (форка Ultrahand), позволяющий произвести тонкую настройку параметров под свою консоль. В случае нестабильной работы разгона, или при желании увеличить производительность консоли, Ultra Tuner - Ваш незаменимый помощник.
-1. **[OC-Suite](https://github.com/hanai3Bi/Switch-OC-Suite/)** - Пакет разгона от Meha/hanai3Bi, открытые исходники гарантируют надежность и отсутствие скрытых гадостей. Вовремя обновляется для поддержки новых возможностей Атмосферы.
+1. **`OC-Switchcraft`**, форк **[OC-Suite](https://github.com/hanai3Bi/Switch-OC-Suite/)** - Лоадер атмосферы с разгоном от B3711, позволяет выжать из N.Switch мощность Xbox One. Вовремя обновляется для поддержки новых возможностей Атмосферы.
 1. **Установленные пейлоады**:
    * [Lockpick_RCM](https://sigmapatches.su) - Программа для снятия ключей консоли.
    * [TegraExplorer](https://github.com/suchmememanyskill/TegraExplorer) - Низкоуровневый файловый менеджер для работы с системой.
@@ -35,7 +35,7 @@
 1. **Установленные модули**
    * [SaltyNX](https://github.com/masagrator/SaltyNX) - Фоновый модуль, позволяющий модифицировать файлы\процессы в консоли, поддерживает плагины. Не совместим с 32-х битными играми (список на гитхабе проекта).
    * [sys-clk](https://github.com/hanai3Bi/Switch-OC-Suite) - Модуль отвечающий за разгон процессора, памяти и видеочипа - для лучшей производительности. Периодически меняю версии от разных авторов. Оригинальные авторы: Meha/hanai3Bi, lineon, p-sam.
-   * [nx-ovlloader](https://github.com/WerWolv/nx-ovlloader/) - С помощью этого модуля осуществляется переключение установленных модулей.
+   * [nx-ovlloader](https://github.com/zdm65477730/nx-ovlloader/) - С помощью этого модуля осуществляется переключение установленных модулей.
    * [Ultra Paw Overlay](https://github.com/Ultra-NX/Ultra-Paw-Overlay), форк [Ultrahand Overlay](https://github.com/ppkantorski/Ultrahand-Overlay) - Специальное оверлей-меню для взаимодействия с системой: разгон, управление режимами через ReverseNX, включение читов, прочее. Так же позволяет использовать самописные пакеты, например - Ultra Tuner.
      - **`Ultra-Overlay`**, мод [sys-clk](https://github.com/hanai3Bi/Switch-OC-Suite) - Оверлей для управления модулем sys-clk. Немного изменен мной, но без копания в исходниках.
      - [Ultra Status Monitor](https://github.com/Ultra-NX/Ultra-Status-Monitor), форк [Status Monitor](https://github.com/hanai3Bi/Status-Monitor-Overlay) - Оверлей позволяющий следить за параметрами консоли в реальном времени. Может выступать в качестве счетчика FPS. Сменить пресет Micro-оверлея можно в Updater.
@@ -49,7 +49,7 @@
    * [Battery Desync Fix](https://github.com/CTCaer/battery_desync_fix_nx) - Программа для сброса контроллера батареи. Не используйте просто так!
    * [HB App Store](https://github.com/fortheusers/hb-appstore) - Бесплатный магазин для скачивания Homebrew приложений.
    * [SysDVR-conf](https://github.com/exelix11/SysDVR) - Программа для установки/удаления dvr патчей для игр. Патчи включают возможность записи в тех играх, где она отключена, но ломают некоторые другие игры, например "Ведьмак 3".
-   * [sys-ftpd](https://github.com/cathery/sys-ftpd) - FTP сервер, работающий на фоне.
+   * [sys-ftpd](https://github.com/tomvita/sys-ftpd-light) - FTP сервер, работающий на фоне.
    * [sys-con](https://github.com/cathery/sys-con) - Модуль, позволяющий подключать практически любые геймпады к консоли по USB.
    * [Mission Control](https://codeberg.org/rashevskyv/kefir) - Модуль, позволяющий подключать практически любые геймпады к консоли по Bluetooth.
    * [Observer-Tool](https://github.com/rkuchkarov/Observer-Tool) - Оверлей с максимально подробным отображением статистики системы, напоминает Afterburner на PC.
@@ -69,18 +69,27 @@
 
 ## Благодарности 
 
-* hanai3Bi/Meha
-* ppkantorski/b0rd2dEAth
+* Meha
+* B3711
+* ppkantorski
 * Cooler3D
-* rashevskyv/хНЯ
-* snupt/Catcher In The Grain Field
+* rashevskyv
+* snupt
 * 4PDA
 #### А так же - отдельная благодарность администрации и участникам Ultra Group
 
 ## Поддержка
 
-Если вам понравились результаты моих стараний, и у вас появилось желание закинуть мне на шаурму - я буду очень благодарен.
-* Сделать это можно через @wallet telegram, на мой аккаунт @redraz
-* Либо через Сбер: 2202200513345833
-* Так же по QR через Tinkoff            
-![](https://github.com/Ultra-NX/Ultra-Resources/raw/main/Tinkoff%20small.png)
\ No newline at end of file
+Если вам нравится проект, и у вас появилось желание поддержать меня копеечкой - я буду очень благодарен.
+У меня в данный момент нет других заработков, так что любая денежная помощь очень ценна для меня.            
+
+### Tinkoff QR
+![](https://github.com/Ultra-NX/Ultra-Resources/raw/main/Tinkoff%20small.png)
+```
+TON:  UQDioCnnPI5sk4KvxWzfPWsWbAyWCkzwhaYjy8Qpg2QwWMiL
+BTC:  1HsC4z8X1YkZzcSKZz1t7MXRa7rPi8qChV
+USDT: TQi3qLVrNGcr6avfVQBXRjpPTyvp5JZ7i2
+
+Сбербанк: 2202200513345833
+Tinkoff:  2200700170486970
+```
\ No newline at end of file
diff --git a/README_ENG.md b/README_ENG.md
index 66bb9f8..afd4f69 100644
--- a/README_ENG.md
+++ b/README_ENG.md
@@ -23,8 +23,7 @@
 1. **[Atmosphere](https://github.com/Atmosphere-NX/Atmosphere)** - Atmosphère, custom firmware for the Nintendo Switch.
 1. **[Hekate](https://github.com/CTCaer/hekate)** - Custom Nintendo Switch graphical bootloader, firmware patcher, toolkit and more.
 1. **[Ultra Tuner](https://github.com/Ultra-NX/Ultra-Tuner)** - Package for Ultra Paw (fork of Ultrahand), which allows you to fine-tune the OC parameters for your console. In case of unstable overclocking, or if you want to increase the performance of your console, Ultra Tuner is your indispensable assistant.
-1. **[OC-Suite](https://github.com/hanai3Bi/Switch-OC-Suite/)** - Overclocking package by Meha/hanai3Bi, open source guarantees reliability and no hidden nasties. Updated in time to support new Atmosphere features.
-   - The original from Meha is temporarily used.
+1. **`OC-Switchcraft`**, a fork of **[OC-Suite](https://github.com/hanai3Bi/Switch-OC-Suite/)** - The overclocked atmosphere loader by B3711, allows you to squeeze the power of the Xbox One out of the N.Switch. Updated in time to support new Atmosphere features.
 1. **Installed Payloads**:
    * [Lockpick_RCM](https://sigmapatches.su) - Program for dumping console keys.
    * [TegraExplorer](https://github.com/suchmememanyskill/TegraExplorer) - A low-level file manager for working with the system.
@@ -35,7 +34,7 @@
 1. **Installed Modules**
    * [SaltyNX](https://github.com/masagrator/SaltyNX) - Background module allowing to modify files/processes in console, supports plugins. Not compatible with 32-bit games (list on the project's github).
    * [sys-clk](https://github.com/hanai3Bi/Switch-OC-Suite) - Module responsible for overclocking CPU, memory and GPU - for better performance. I change versions from different authors from time to time. Original authors: Meha/hanai3Bi, lineon, p-sam.
-   * [nx-ovlloader](https://github.com/WerWolv/nx-ovlloader/) - This module is used to switch the installed modules.
+   * [nx-ovlloader](https://github.com/zdm65477730/nx-ovlloader/) - This module is used to switch the installed modules.
    * [Ultra Paw Overlay](https://github.com/Ultra-NX/Ultra-Paw-Overlay), a fork of [Ultrahand Overlay](https://github.com/ppkantorski/Ultrahand-Overlay) - Special overlay-menu for interacting with the system: overclocking, controlling modes via ReverseNX, enabling cheats, etc. Also allows to use your own packages, for example, Ultra Tuner.
      - **`Ultra-Overlay`**, a mod of [sys-clk](https://github.com/hanai3Bi/Switch-OC-Suite) - Overlay for controlling sys-clk module. Slightly modified by me, but without digging into sources.
      - [Ultra Status Monitor](https://github.com/Ultra-NX/Ultra-Status-Monitor), a fork of [Status Monitor](https://github.com/masagrator/Status-Monitor-Overlay) - Overlay that allows you to monitor console parameters in real time. It can act as an FPS counter. You change preset of Micro-overlay appearance in Updater.
@@ -49,7 +48,7 @@
    * [Battery Desync Fix](https://github.com/CTCaer/battery_desync_fix_nx) - Program to reset the battery controller. Do not use unnecessarily!
    * [HB App Store](https://github.com/fortheusers/hb-appstore) - A free store for downloading Homebrew apps.
    * [SysDVR-conf](https://github.com/exelix11/SysDVR) - A program to install/uninstall dvr patches for games. Patches enable recording in games where it is disabled, but break some other games like "The Witcher 3".
-   * [sys-ftpd](https://github.com/cathery/sys-ftpd) - FTP server running in background.
+   * [sys-ftpd](https://github.com/tomvita/sys-ftpd-light) - FTP server running in background.
    * [sys-con](https://github.com/cathery/sys-con) - A module that allows you to connect almost any gamepads to the console via USB.
    * [Mission Control](https://codeberg.org/rashevskyv/kefir) - A module that allows you to connect almost any gamepads to the console via bluetooth.
    * [Observer-Tool](https://github.com/rkuchkarov/Observer-Tool) - An overlay with the most detailed display of system statistics, similar to Afterburner on PC.
@@ -79,6 +78,11 @@ Listed below are the licenses of those programs that have been modified specific
 
 ## Support
 
-If you liked the results of my labors and you wanted to thank me - I would be very grateful.            
+If you like the project and you have a desire to support me with a penny - I will be very grateful.
+I have no other income at the moment, so any monetary help is very valuable to me.            
 You can do this via @wallet telegram, on my @redraz account            
-I am from Russia, so there are no other convenient ways to donate me =(
\ No newline at end of file
+```
+TON:  UQDioCnnPI5sk4KvxWzfPWsWbAyWCkzwhaYjy8Qpg2QwWMiL
+BTC:  1HsC4z8X1YkZzcSKZz1t7MXRa7rPi8qChV
+USDT: TQi3qLVrNGcr6avfVQBXRjpPTyvp5JZ7i2
+```
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/010000B01A452000/EA01C4BA969E8159.yaml b/SaltySD/plugins/FPSLocker/patches/010000B01A452000/EA01C4BA969E8159.yaml
new file mode 100644
index 0000000..b6fecd1
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/010000B01A452000/EA01C4BA969E8159.yaml
@@ -0,0 +1,279 @@
+# Jujutsu Kaisen Cursed Clash US 1.0.2
+# BID: EA01C4BA969E8159
+
+unsafeCheck: true
+
+15FPS:
+  # r.DynamicRes.FrameTimeBudget (1000/FPS) rounded to 2 decimals
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [66.66, 66.66]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [15, 15]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+20FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [50, 50]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [20, 20]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+25FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [40, 40]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [25, 25]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+30FPS:
+  # r.DynamicRes.FrameTimeBudget (default value)
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [33.33, 33.33]
+  # t.MaxFPS (default value is 60)
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync (default value is 1)
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+35FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [28.51, 28.51]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [35, 35]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+40FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [25, 25]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [40, 40]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+45FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [22.22, 22.22]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [45, 45]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+50FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [20, 20]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [50, 50]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+55FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [18.18, 18.18]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [55, 55]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+60FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [16.66, 16.66]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
diff --git a/SaltySD/plugins/FPSLocker/patches/010023001969A000/D40B81867A121EB0.yaml b/SaltySD/plugins/FPSLocker/patches/010023001969A000/D40B81867A121EB0.yaml
new file mode 100644
index 0000000..6491e06
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/010023001969A000/D40B81867A121EB0.yaml
@@ -0,0 +1,219 @@
+# Session: Skate Sim 1.1.3
+# BID: D40B81867A121EB0
+
+unsafeCheck: true
+
+15FPS:
+  # r.DynamicRes.FrameTimeBudget = 0.81 * (1000/FPS)
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [54, 54]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [15, 15]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+20FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [40.5, 40.5]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [20, 20]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+25FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [32.4, 32.4]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [25, 25]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+30FPS:
+  # r.DynamicRes.FrameTimeBudget (default value)
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [27, 27]
+  # t.MaxFPS (default value)
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync (default is 1)
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+35FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [23.142, 23.142]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [35, 35]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+40FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [20.25, 20.25]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [40, 40]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+45FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [18, 18]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [45, 45]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+50FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [16.2, 16.2]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [50, 50]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+55FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [14.727, 14.727]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [55, 55]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+60FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x7249868, 0]
+    value_type: float
+    value: [13.5, 13.5]
+  # t.MaxFPS (default value)
+  -
+    type: write
+    address: [MAIN, 0x7277438, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x6A7D0C8, 0]
+    value_type: uint32
+    value: [0, 0]
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/01002FC012548000/EA01C4BA969E8159.yaml b/SaltySD/plugins/FPSLocker/patches/01002FC012548000/EA01C4BA969E8159.yaml
new file mode 100644
index 0000000..2dd8570
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/01002FC012548000/EA01C4BA969E8159.yaml
@@ -0,0 +1,279 @@
+# Jujutsu Kaisen Cursed Clash JP 1.0.2
+# BID: EA01C4BA969E8159
+
+unsafeCheck: true
+
+15FPS:
+  # r.DynamicRes.FrameTimeBudget (1000/FPS) rounded to 2 decimals
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [66.66, 66.66]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [15, 15]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+20FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [50, 50]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [20, 20]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+25FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [40, 40]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [25, 25]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+30FPS:
+  # r.DynamicRes.FrameTimeBudget (default value)
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [33.33, 33.33]
+  # t.MaxFPS (default value is 60)
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync (default value is 1)
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+35FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [28.51, 28.51]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [35, 35]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+40FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [25, 25]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [40, 40]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+45FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [22.22, 22.22]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [45, 45]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+50FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [20, 20]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [50, 50]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+55FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [18.18, 18.18]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [55, 55]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+60FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [16.66, 16.66]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
diff --git a/SaltySD/plugins/FPSLocker/patches/0100321017CC0000/62B999CF9D465F00.yaml b/SaltySD/plugins/FPSLocker/patches/0100321017CC0000/62B999CF9D465F00.yaml
new file mode 100644
index 0000000..30da1e8
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/0100321017CC0000/62B999CF9D465F00.yaml
@@ -0,0 +1,84 @@
+# Hammerwatch Anniversary Edition 1.0.2
+# BID: 62B999CF9D465F00
+
+unsafeCheck: true
+
+MASTER_WRITE:
+  # Rewrite "v_fps_limit 30" to 62
+  -
+    type: bytes
+    main_offset: 0x805BEC
+    value_type: uint16
+    value: 0x3236
+  # Change egl Interval to lock game by default to 30 FPS
+  -
+    type: bytes
+    main_offset: 0x1461F8
+    value_type: uint32
+    value: 0x52800041
+  -
+    type: bytes
+    main_offset: 0x146220
+    value_type: uint32
+    value: 0x52800041
+15FPS:
+  # DUMMY
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+20FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+25FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+30FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+35FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+40FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+45FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+50FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+55FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
+60FPS:
+  -
+    type: write
+    address: [MAIN, 0x179C0E0]
+    value_type: uint8
+    value: 0
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/0100367016DF0000/77DDECED11491422.yaml b/SaltySD/plugins/FPSLocker/patches/0100367016DF0000/77DDECED11491422.yaml
new file mode 100644
index 0000000..ce2cfc7
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/0100367016DF0000/77DDECED11491422.yaml
@@ -0,0 +1,84 @@
+# Hammerwatch 2 1.0.2
+# BID: 77DDECED11491422
+
+unsafeCheck: true
+
+MASTER_WRITE:
+  # Rewrite "v_fps_limit 30" to 62
+  -
+    type: bytes
+    main_offset: 0x805B29
+    value_type: uint16
+    value: 0x3236
+  # Change egl Interval to lock game by default to 30 FPS
+  -
+    type: bytes
+    main_offset: 0x1461C8
+    value_type: uint32
+    value: 0x52800041
+  -
+    type: bytes
+    main_offset: 0x1461F0
+    value_type: uint32
+    value: 0x52800041
+15FPS:
+  # DUMMY
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+20FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+25FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+30FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+35FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+40FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+45FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+50FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+55FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
+60FPS:
+  -
+    type: write
+    address: [MAIN, 0x17F2AC8]
+    value_type: uint8
+    value: 0
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/01006F401D934000/C8E123AFDB73E936.yaml b/SaltySD/plugins/FPSLocker/patches/01006F401D934000/C8E123AFDB73E936.yaml
new file mode 100644
index 0000000..960ab28
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/01006F401D934000/C8E123AFDB73E936.yaml
@@ -0,0 +1,159 @@
+# Twilight Survivors 0.2
+# BID: C8E123AFDB73E936
+
+unsafeCheck: true
+
+15FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [15, 15]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+20FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [20, 20]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+25FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [25, 25]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+30FPS:
+  # t.MaxFPS (default value)
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync (default is 1)
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+35FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [35, 35]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+40FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [40, 40]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+45FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [45, 45]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+50FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [50, 50]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+55FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [55, 55]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
+  -
+    type: block
+    what: timing
+60FPS:
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x6483898, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x5C870A8, 0]
+    value_type: uint32
+    value: [0, 0]
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/0100853015E86000/48391605F5BDF634.yaml b/SaltySD/plugins/FPSLocker/patches/0100853015E86000/48391605F5BDF634.yaml
new file mode 100644
index 0000000..af575a6
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/0100853015E86000/48391605F5BDF634.yaml
@@ -0,0 +1,87 @@
+# No Man's Sky 4.6.4
+# BID: 48391605F5BDF634
+
+unsafeCheck: true
+
+MASTER_WRITE:
+# Redirect DR frametime target to MAIN+0x4A96400
+  -
+    type: bytes
+    main_offset: 0x1E5595C
+    value_type: uint32
+    value: 0xD503201F
+  -
+    type: bytes
+    main_offset: 0x1E55968
+    value_type: uint32
+    value: 
+      - 0xB0016212
+      - 0xB9400408
+      - 0xBD44024B
+  # default value
+  -
+    type: bytes
+    main_offset: 0x4A96400
+    value_type: float
+    value: 33.3333333333
+15FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 66.6666666666
+20FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 50
+25FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 40
+30FPS:
+  # default value
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 33.3333333333
+35FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 28.5714
+40FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 25
+45FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 22.2222222222
+50FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 20
+55FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 18.1818181818
+60FPS:
+  -
+    type: write
+    address: [MAIN, 0x4A96400]
+    value_type: float
+    value: 16.6666666666
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/010085401A454000/EA01C4BA969E8159.yaml b/SaltySD/plugins/FPSLocker/patches/010085401A454000/EA01C4BA969E8159.yaml
new file mode 100644
index 0000000..3968781
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/010085401A454000/EA01C4BA969E8159.yaml
@@ -0,0 +1,279 @@
+# Jujutsu Kaisen Cursed Clash EUR 1.0.2
+# BID: EA01C4BA969E8159
+
+unsafeCheck: true
+
+15FPS:
+  # r.DynamicRes.FrameTimeBudget (1000/FPS) rounded to 2 decimals
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [66.66, 66.66]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [15, 15]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+20FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [50, 50]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [20, 20]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+25FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [40, 40]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [25, 25]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+30FPS:
+  # r.DynamicRes.FrameTimeBudget (default value)
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [33.33, 33.33]
+  # t.MaxFPS (default value is 60)
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync (default value is 1)
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+35FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [28.51, 28.51]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [35, 35]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+40FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [25, 25]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [40, 40]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+45FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [22.22, 22.22]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [45, 45]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+50FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [20, 20]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [50, 50]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+55FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [18.18, 18.18]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [55, 55]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
+  -
+    type: block
+    what: timing
+60FPS:
+  # r.DynamicRes.FrameTimeBudget
+  -
+    type: write
+    address: [MAIN, 0x8014A48, 0]
+    value_type: float
+    value: [16.66, 16.66]
+  # t.MaxFPS
+  -
+    type: write
+    address: [MAIN, 0x8057F50, 0]
+    value_type: float
+    value: [0, 0]
+  # r.VSync
+  -
+    type: write
+    address: [MAIN, 0x73990C8, 0]
+    value_type: uint32
+    value: [0, 0]
+  # Disable bUseFixedFrameRate
+  -
+    type: write
+    address: [MAIN, 0x80577A8, 0x9C4]
+    value_type: uint32
+    value: 7
diff --git a/SaltySD/plugins/FPSLocker/patches/0100BDB01A0E6000/B66D2F51A32F54A5.yaml b/SaltySD/plugins/FPSLocker/patches/0100BDB01A0E6000/B66D2F51A32F54A5.yaml
new file mode 100644
index 0000000..eaa9ba6
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/0100BDB01A0E6000/B66D2F51A32F54A5.yaml
@@ -0,0 +1,93 @@
+# EA SPORTS FC 24 1.57.20c8
+# BID: B66D2F51A32F54A5
+
+unsafeCheck: true
+
+15FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 15
+20FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 20
+25FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 25
+  -
+    type: block
+    what: timing
+30FPS:
+  # Internal FPS Lock (default value is 30)
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 30
+35FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 35
+  -
+    type: block
+    what: timing
+40FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 40
+  -
+    type: block
+    what: timing
+45FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 45
+  -
+    type: block
+    what: timing
+50FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 50
+  -
+    type: block
+    what: timing
+55FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 55
+  -
+    type: block
+    what: timing
+60FPS:
+  # Internal FPS Lock
+  -
+    type: write
+    address: [MAIN, 0xCD73E20, 8]
+    value_type: double
+    value: 60
\ No newline at end of file
diff --git a/SaltySD/plugins/FPSLocker/patches/0100FBD013AB6000/174309E9B55533B9.yaml b/SaltySD/plugins/FPSLocker/patches/0100FBD013AB6000/174309E9B55533B9.yaml
new file mode 100644
index 0000000..7b02599
--- /dev/null
+++ b/SaltySD/plugins/FPSLocker/patches/0100FBD013AB6000/174309E9B55533B9.yaml
@@ -0,0 +1,82 @@
+# SnowRunner 1.0.30
+# BID: 174309E9B55533B9
+# Just search for 0x42055555
+
+unsafeCheck: true
+
+MASTER_WRITE:
+# Redirect DR frametime target to MAIN+0x353C1E8
+  -
+    type: bytes
+    main_offset: 0x18810F4
+    value_type: uint32
+    value: 
+      - 0xF000E5CA
+      - 0xBD41E942
+  # default value
+  -
+    type: bytes
+    main_offset: 0x353C1E8
+    value_type: float
+    value: 33.3333333333
+15FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 66.6666666666
+20FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 50
+25FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 40
+30FPS:
+  # default value
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 33.3333333333
+35FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 28.5714
+40FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 25
+45FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 22.2222222222
+50FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 20
+55FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 18.1818181818
+60FPS:
+  -
+    type: write
+    address: [MAIN, 0x353C1E8]
+    value_type: float
+    value: 16.6666666666
\ No newline at end of file
diff --git a/atmosphere/contents/0000000000534C56/exefs.nsp b/atmosphere/contents/0000000000534C56/exefs.nsp
index 1e48f21..02a2f39 100644
Binary files a/atmosphere/contents/0000000000534C56/exefs.nsp and b/atmosphere/contents/0000000000534C56/exefs.nsp differ
diff --git a/atmosphere/contents/00FF0000636C6BFF/exefs.nsp b/atmosphere/contents/00FF0000636C6BFF/exefs.nsp
index 300178f..3d74621 100644
Binary files a/atmosphere/contents/00FF0000636C6BFF/exefs.nsp and b/atmosphere/contents/00FF0000636C6BFF/exefs.nsp differ
diff --git a/atmosphere/contents/420000000000000B/exefs.nsp b/atmosphere/contents/420000000000000B/exefs.nsp
index b918d7b..d073bca 100644
Binary files a/atmosphere/contents/420000000000000B/exefs.nsp and b/atmosphere/contents/420000000000000B/exefs.nsp differ
diff --git a/atmosphere/contents/420000000007E51A/exefs.nsp b/atmosphere/contents/420000000007E51A/exefs.nsp
index ce0fc1c..d7d5406 100644
Binary files a/atmosphere/contents/420000000007E51A/exefs.nsp and b/atmosphere/contents/420000000007E51A/exefs.nsp differ
diff --git a/atmosphere/kips/loader.kip b/atmosphere/kips/loader.kip
index 2616290..8fefbd4 100644
Binary files a/atmosphere/kips/loader.kip and b/atmosphere/kips/loader.kip differ
diff --git a/atmosphere/package3 b/atmosphere/package3
index 34b1b3f..7ddee73 100644
Binary files a/atmosphere/package3 and b/atmosphere/package3 differ
diff --git a/atmosphere/stratosphere.romfs b/atmosphere/stratosphere.romfs
index addf395..d37af82 100644
Binary files a/atmosphere/stratosphere.romfs and b/atmosphere/stratosphere.romfs differ
diff --git a/config/Tuner.ini b/config/Tuner.ini
index dd9b488..68522c2 100644
--- a/config/Tuner.ini
+++ b/config/Tuner.ini
@@ -8,17 +8,7 @@ footer = Default
 mode = option
 grouping = default
 
-[*Loader Kip]
-footer = Meha
-mode = option
-grouping = default
-
 [*Status Monitor]
-footer = Ultra
-mode = option
-grouping = default
-
-[*Preset?SM]
 footer = Normal-
 mode = option
 grouping = default
diff --git a/config/aio-switch-updater/custom_packs.json b/config/aio-switch-updater/custom_packs.json
index cde2058..6da38fc 100644
--- a/config/aio-switch-updater/custom_packs.json
+++ b/config/aio-switch-updater/custom_packs.json
@@ -1,7 +1,7 @@
 {
   "ams": {
-    "[PACK] Ultra-NX 2.1|RC1 HOS 18": "https://github.com/Ultra-NX/Ultra/releases/download/2.1-R1/Ultra.zip",
-    "[PACK] Ultra-NX 2.0|R4 HOS <17": "https://github.com/Ultra-NX/Ultra/releases/latest/download/Ultra.zip"
+    "[PACK] Ultra 2.1 Release Candidate 2 - up to 18 HOS": "https://github.com/Ultra-NX/Ultra/releases/latest/download/Ultra.zip",
+    "[PACK] Ultra 2.0 Release 4 - Stable, up to 17 HOS": "https://github.com/Ultra-NX/Ultra/releases/download/2.0-R4/Ultra.zip"
   },
   "misc": {
     "Brick Code": "https://github.com/Ultra-NX/Ultra-Resources/raw/main/brick.zip",
diff --git a/config/aio-switch-updater/preserve.txt b/config/aio-switch-updater/preserve.txt
index f72940f..fa76862 100644
--- a/config/aio-switch-updater/preserve.txt
+++ b/config/aio-switch-updater/preserve.txt
@@ -1,3 +1,4 @@
 /switch/DBI/
 /bootloader/nyx.ini
-/config/sys-clk/
\ No newline at end of file
+/config/sys-clk/
+/config/sys-patch/
\ No newline at end of file
diff --git a/config/sys-patch/config.ini b/config/sys-patch/config.ini
index 392c95d..eac4600 100644
--- a/config/sys-patch/config.ini
+++ b/config/sys-patch/config.ini
@@ -2,4 +2,23 @@
 patch_sysmmc=0   ; 1=(default) patch sysmmc, 0=don't patch sysmmc
 patch_emummc=1   ; 1=(default) patch emummc, 0=don't patch emummc
 enable_logging=1 ; 1=(default) output /config/sys-patch/log.ini 0=no log
-version_skip=1   ; 1=(default) skips out of date patterns, 0=search all patterns
\ No newline at end of file
+version_skip=1   ; 1=(default) skips out of date patterns, 0=search all patterns
+[fs]
+noacidsigchk1=1
+noacidsigchk2=1
+noncasigchk_old=1
+noncasigchk_new=1
+noncasigchk_new2=1
+nocntchk_old=1
+nocntchk_new=1
+[ldr]
+noacidsigchk=1
+[es]
+es1=1
+es2=1
+es3=1
+es4=1
+es5=1
+es6=1
+[nifm]
+ctest=1
diff --git a/config/ultrapaw/themes/Basic.ini b/config/ultrapaw/themes/Basic.ini
new file mode 100644
index 0000000..5f18247
--- /dev/null
+++ b/config/ultrapaw/themes/Basic.ini
@@ -0,0 +1,26 @@
+[theme]
+clock_color = #FFFFFF
+battery_color = #FFFFFF
+bg_alpha = 13
+bg_color = #000000
+seperator_alpha = 0
+seperator_color = #777777
+text_color = #FFFFFF
+info_text_color = #FFFFFF
+version_text_color = #AAAAAA
+on_text_color = #00FFDD
+off_text_color = #AAAAAA
+invalid_text_color = #FF0000
+selection_text_color = #FFFFFF
+selection_bg_color = #000000
+trackbar_color = #555555
+highlight_color_1 = #2288CC
+highlight_color_2 = #88FFFF
+click_color = #F7253E
+invert_bg_click_color = false
+disable_selection_bg = false
+disable_colorful_logo = true
+logo_color_1 = #FFFFFF
+logo_color_2 = #FF0000
+dynamic_logo_color_1 = #00E669
+dynamic_logo_color_2 = #8080EA
\ No newline at end of file
diff --git a/switch/.overlays/Ultra.ovl b/switch/.overlays/Ultra.ovl
index f9b273a..ac60d36 100644
Binary files a/switch/.overlays/Ultra.ovl and b/switch/.overlays/Ultra.ovl differ
diff --git a/switch/.overlays/ovlEdiZon.ovl b/switch/.overlays/ovlEdiZon.ovl
index a78e659..d61d955 100644
Binary files a/switch/.overlays/ovlEdiZon.ovl and b/switch/.overlays/ovlEdiZon.ovl differ
diff --git a/switch/.overlays/ovlSysmodules.ovl b/switch/.overlays/ovlSysmodules.ovl
index 0c4bd9c..441dd57 100644
Binary files a/switch/.overlays/ovlSysmodules.ovl and b/switch/.overlays/ovlSysmodules.ovl differ
diff --git a/switch/.overlays/ovlmenu.ovl b/switch/.overlays/ovlmenu.ovl
index 8d20bf2..87f264a 100644
Binary files a/switch/.overlays/ovlmenu.ovl and b/switch/.overlays/ovlmenu.ovl differ
diff --git a/switch/.overlays/sys-patch-overlay.ovl b/switch/.overlays/sys-patch-overlay.ovl
new file mode 100644
index 0000000..2967755
Binary files /dev/null and b/switch/.overlays/sys-patch-overlay.ovl differ