diff --git a/gps.conf b/gps.conf new file mode 100644 index 0000000..db58e7b --- /dev/null +++ b/gps.conf @@ -0,0 +1,389 @@ +# cp /vendor/etc/gps.conf +#USE AT YOUR OWN RISK +#MAKE A COPY OF YOUR OLD CONF BEFORE APPLYING THIS + +# XTRA_SERVER_QUERY (1=on, 0=off) +# If XTRA_SERVER_QUERY is on, the XTRA_SERVERs listed +# below will be ignored, and instead the servers will +# be queried from the modem. +XTRA_SERVER_QUERY=1 +# XTRA_SERVERs below are used only if XTRA_SERVER_QUERY +# is off. THESE ARE DISABLED +XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin +XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin +XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin + +# Error Estimate +# _SET = 1 +# _CLEAR = 0 +ERR_ESTIMATE=0 + +#NTP server +NTP_SERVER=time.google.com +NTP_SERVER_2=pool.ntp.org +NTP_SERVER_3=0.europe.pool.ntp.org + +#XTRA CA path +#XTRA_CA_PATH=/usr/lib/ssl-1.1/certs + +# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info +# 4 - Debug, 5 - Verbose +# If DEBUG_LEVEL is commented, Android's logging levels will be used +DEBUG_LEVEL = 3 + +# Intermediate position report, 1=enable, 0=disable +# YOU COULD TRY PLAYING WITH THIS +INTERMEDIATE_POS=0 + +# supl version 1.0 +SUPL_VER=0x20000 + +# Emergency SUPL, 1=enable, 0=disable +SUPL_ES=1 + +#Choose PDN for Emergency SUPL +#1 - Use emergency PDN +#0 - Use regular SUPL PDN for Emergency SUPL +USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 + +#SUPL_MODE is a bit mask set in config.xml per carrier by default. +#If it is uncommented here, this value will overwrite the value from +#config.xml. +#MSA=0X2 +#MSB=0X1 +SUPL_MODE=3 + +# GPS Capabilities bit mask +# SCHEDULING = 0x01 +# MSB = 0x02 +# MSA = 0x04 +# ON_DEMAND_TIME = 0x10 +# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING +CAPABILITIES=0x17 + +# Accuracy threshold for intermediate positions +# less accurate positions are ignored, 0 for passing all positions +ACCURACY_THRES=70 + +################################ +##### AGPS server settings ##### +################################ + +# FOR SUPL SUPPORT, set the following +# SUPL_HOST=supl.host.com or IP +# SUPL_PORT=1234 +SUPL_HOST=supl.google.com +SUPL_PORT=7275 + +# FOR MO SUPL SUPPORT, set the following +# MO_SUPL_HOST=supl.host.com or IP +# MO_SUPL_PORT=1234 + +# FOR C2K PDE SUPPORT, set the following +# C2K_HOST=c2k.pde.com or IP +# C2K_PORT=1234 + +# Bitmask of slots that are available +# for write/install to, where 1s indicate writable, +# and the default value is 0 where no slots +# are writable. For example, AGPS_CERT_WRITABLE_MASK +# of b1000001010 makes 3 slots available +# and the remaining 7 slots unwritable. +#AGPS_CERT_WRITABLE_MASK=0 + +#################################### +# LTE Positioning Profile Settings +#################################### +# LPP_PROFILE is a bit mask +# 0: Enable RRLP on LTE(Default) +# 1: Enable LPP_User_Plane on LTE +# 2: Enable LPP_Control_Plane +# 3: Enable both LPP_User_Plane and LPP_Control_Plane +LPP_PROFILE = 3 + +#################################### +#Datum Type +#################################### +# 0: WGS-84 +# 1: PZ-90 +DATUM_TYPE = 0 + +################################ +# EXTRA SETTINGS +################################ +# NMEA provider (1=Modem Processor, 0=Application Processor) +NMEA_PROVIDER=0 + +################################ +# NMEA TAG BLOCK GROUPING +################################ +# NMEA tag block grouping is only applicable to GSA +# Default is disabled +# 0 - disabled +# 1 - enabled +NMEA_TAG_BLOCK_GROUPING_ENABLED = 0 + +# Customized NMEA GGA fix quality that can be used to tell +# whether SENSOR contributed to the fix. +# +# When this configuration item is not enabled (set to any value that is not 1), +# GGA fix quality conforms to NMEA standard spec as below: +# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2 +# RTK fixed fix w/ or w/o sensor: 4 +# RTK float fix w/ or w/o sensor: 5 +# SPE fix w/ or w/o sensor: 1 +# Sensor dead reckoning fix: 6 +# +# When this configuration is enabled (set to 1), GGA fix quality +# will be output as below: +# PPP fix w/o sensor: 59, w/ sensor: 69 +# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62 +# RTK fixed fix w/o sensor: 4, w/ sensor: 64 +# RTK float fix w/o sensor: 5, w/ sensor: 65, +# SPE fix w/o sensor: 1, and w/ sensor: 61 +# Sensor dead reckoning fix: 6 +# +# any value that is not 1 - disabled +# 1 - enabled +CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0 + +################################ +# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0" +################################ +# NMEA Reporting Rate +# Set it to "1HZ" for 1Hz NMEA Reporting +# Set it to "NHZ" for NHz NMEA Reporting +#Default : NHZ (overridden by position update rate if set to lower rates) +NMEA_REPORT_RATE=NHZ + +# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) +SGLTE_TARGET=0 + +################################################## +# Select Positioning Protocol on A-GLONASS system +################################################## +# 0x1: RRC CPlane +# 0x2: RRLP UPlane +# 0x4: LLP Uplane +A_GLONASS_POS_PROTOCOL_SELECT = 0xf + +################################################## +# Select technology for LPPe Control Plane +################################################## +# 0x1: DBH for LPPe CP +# 0x2: WLAN AP Measurements for LPPe CP +# 0x4: SRN AP measurement for CP +# 0x8: Sensor Barometer Measurement LPPe CP +LPPE_CP_TECHNOLOGY = 0x2 + +################################################## +# Select technology for LPPe User Plane +################################################## +# 0x1: DBH for LPPe UP +# 0x2: WLAN AP Measurements for LPPe UP +# 0x4: SRN AP measurement for UP +# 0x8: Sensor Barometer Measurement LPPe UP +LPPE_UP_TECHNOLOGY = 0x2 + +################################################## +# AGPS_CONFIG_INJECT +################################################## +# enable/disable injection of AGPS configurations: +# SUPL_VER +# SUPL_HOST +# SUPL_PORT +# MO_SUPL_HOST +# MO_SUPL_PORT +# C2K_HOST +# C2K_PORT +# LPP_PROFILE +# A_GLONASS_POS_PROTOCOL_SELECT +# 0: disable +# 1: enable +AGPS_CONFIG_INJECT = 1 + +################################################## +# GNSS settings for automotive use cases +# Configurations in following section are +# specific to automotive use cases, others +# please do not change, keep the default values +################################################## + +# AP Coarse Timestamp Uncertainty +################################################## +# default : 10 +# AP time stamp uncertainty, until GNSS receiver +# is able to acquire better timing information +AP_TIMESTAMP_UNCERTAINTY = 10 + +##################################### +# DR_SYNC Pulse Availability +##################################### +# 0 : DR_SYNC pulse not available (default) +# 1 : DR_SYNC pulse available +# This configuration enables the driver to make use +# of PPS events generated by DR_SYNC pulse +# Standard Linux PPS driver needs to be enabled +DR_SYNC_ENABLED = 0 + +##################################### +# PPS Device name +##################################### +PPS_DEVICENAME = /dev/pps0 + +##################################### +# Ignore PPS at Startup and after long outage +##################################### +IGNORE_PPS_PULSE_COUNT = 1 + +##################################### +# Long GNSS RF outage in seconds +##################################### +GNSS_OUTAGE_DURATION = 10 + +##################################### +# AP Clock Accuracy +##################################### +# Quality of APPS processor clock (in PPM). +# Value specified is used for calculation of +# APPS time stamp uncertainty +AP_CLOCK_PPM = 100 + +##################################### +# MAX ms difference to detect missing pulse +##################################### +# Specifies time threshold in ms to validate any missing PPS pulses +MISSING_PULSE_TIME_DELTA = 900 + +##################################### +# Propagation time uncertainty +##################################### +# This settings enables time uncertainty propagation +# logic incase of missing PPS pulse +PROPAGATION_TIME_UNCERTAINTY = 1 + +####################################### +# APN / IP Type Configuration +# APN and IP Type to use for setting +# up WWAN call. +# Use below values for IP Type: +# v4 = 4 +# v6 = 6 +# v4v6 = 10 +####################################### +# INTERNET_APN = abc.xyz +# INTERNET_IP_TYPE = 4 +# SUPL_APN = abc.xyz +# SUPL_IP_TYPE = 4 + +##################################### +# Modem type +##################################### +# This setting configures modem type +# (external=0 or internal=1) +# comment out the next line to vote +# for the first modem in the list +MODEM_TYPE = 1 + +################################################## +# CONSTRAINED TIME UNCERTAINTY MODE +################################################## +# 0 : disabled (default) +# 1 : enabled +# This setting enables GPS engine to keep its time +# uncertainty below the specified constraint +#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0 + +# If constrained time uncertainty mode is enabled, +# this setting specifies the time uncertainty +# threshold that gps engine need to maintain. +# In unit of milli-seconds. +# Default is 0.0 meaning that modem default value +# of time uncertainty threshold will be used. +#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0 + +# If constrained time uncertainty mode is enabled, +# this setting specifies the power budget that +# gps engine is allowed to spend to maintain the time +# uncertainty. +# Default is 0 meaning that GPS engine is not constained +# by power budget and can spend as much power as needed. +# In unit of 0.1 milli watt second. +#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0 + +################################################## +# POSITION ASSISTED CLOCK ESTIMATOR +################################################## +# 0 : disabled (default) +# 1 : enabled +# This setting enables GPS engine to estimate clock +# bias and drift when the signal from at least 1 +# SV is available and the UE�s position is known by +# other position engines. +#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0 + +##################################### +# proxyAppPackageName +##################################### +# This is a string that is sent to the framework +# in nfwNotifyCb callback +#PROXY_APP_PACKAGE_NAME = com.lbe.security.miui + +##################################### +# CP_MTLR_ES +##################################### +# CP MTLR ES, 1=enable, 0=disable +CP_MTLR_ES=0 + +################################################## +# GNSS_DEPLOYMENT +################################################## +# 0 : Enable QTI GNSS (default) +# 1 : Enable QCSR SS5 +# 2 : Enable PDS API +# This setting use to select between QTI GNSS, +# QCSR SS5 hardware receiver, and PDS API. +# By default QTI GNSS receiver is enabled. +# GNSS_DEPLOYMENT = 0 + +################################################## +## LOG BUFFER CONFIGURATION +################################################## +#LOG_BUFFER_ENABLED, 1=enable, 0=disable +#*_LEVEL_TIME_DEPTH, maximum time depth of level * +#in log buffer, unit is second +#*_LEVEL_MAX_CAPACITY, maximum numbers of level * +#log print sentences in log buffer +LOG_BUFFER_ENABLED = 0 +E_LEVEL_TIME_DEPTH = 600 +E_LEVEL_MAX_CAPACITY = 50 +W_LEVEL_TIME_DEPTH = 500 +W_LEVEL_MAX_CAPACITY = 100 +I_LEVEL_TIME_DEPTH = 400 +I_LEVEL_MAX_CAPACITY = 200 +D_LEVEL_TIME_DEPTH = 30 +D_LEVEL_MAX_CAPACITY = 300 +V_LEVEL_TIME_DEPTH = 200 +V_LEVEL_MAX_CAPACITY = 400 + +# Xiaomi add for breaking xtra download limitation +XTRA_TEST_ENABLED = 1 +XTRA_THROTTLE_ENABLED = 0 +XTRA_SYSTEM_TIME_INJECT = 1 +# Mechanism to handle the gnss assistance data download +# in very bad network situations +XTRA_SOCK_KEEPALIVE=1 +################################################## +# Allow buffer diag log packets when diag memory allocation +# fails during boot up time. +################################################## +BUFFER_DIAG_LOGGING = 1 + +####################################### +# NTRIP CLIENT LIBRARY NAME +####################################### +# NTRIP_CLIENT_LIB_NAME = + +################################################## +# Correction Data Framework settings +# Default v