add final conf

gps.conf

@@ -1,14 +1,10 @@
-# cp /vendor/etc/gps.conf
+# 2XTRA_SERVER_QUERY (1=on, 0=off)
-#USE AT YOUR OWN RISK
-#MAKE A COPY OF YOUR OLD CONF BEFORE APPLYING THIS
-
-# XTRA_SERVER_QUERY (1=on, 0=off)
 # If XTRA_SERVER_QUERY is on, the XTRA_SERVERs listed
 # below will be ignored, and instead the servers will
 # be queried from the modem.
-XTRA_SERVER_QUERY=1
+XTRA_SERVER_QUERY=0
 # XTRA_SERVERs below are used only if XTRA_SERVER_QUERY
-# is off. THESE ARE DISABLED
+# is off.
 XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
 XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
 XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
@@ -18,71 +14,43 @@ XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
 # _CLEAR = 0
 ERR_ESTIMATE=0
 
-#NTP server
+# NTP Server
-NTP_SERVER=time.google.com
+# NTP_SERVER=time.gpsonextra.net
-NTP_SERVER_2=pool.ntp.org 
+# Asia
-NTP_SERVER_3=0.europe.pool.ntp.org
+# NTP_SERVER=asia.pool.ntp.org
+# Europe
+NTP_SERVER=europe.pool.ntp.org
+# North America
+# NTP_SERVER=north-america.pool.ntp.org
 
-#XTRA CA path
+#NTP_SERVER = time.google.com
-#XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
+
+# If NTP_SERVER is commented NTP_SERVER=time.izatcloud.net is used
 
 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
 #               4 - Debug, 5 - Verbose
 # If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 3
+DEBUG_LEVEL = 1
 
 # Intermediate position report, 1=enable, 0=disable
-# YOU COULD TRY PLAYING WITH THIS
 INTERMEDIATE_POS=0
 
-# supl version 1.0
-SUPL_VER=0x20000
-
-# Emergency SUPL, 1=enable, 0=disable
-SUPL_ES=1
-
-#Choose PDN for Emergency SUPL
-#1 - Use emergency PDN
-#0 - Use regular SUPL PDN for Emergency SUPL
-USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
-
-#SUPL_MODE is a bit mask set in config.xml per carrier by default.
-#If it is uncommented here, this value will overwrite the value from
-#config.xml.
-#MSA=0X2
-#MSB=0X1
-SUPL_MODE=3
-
 # GPS Capabilities bit mask
 # SCHEDULING = 0x01
 # MSB = 0x02
 # MSA = 0x04
 # ON_DEMAND_TIME = 0x10
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
+# GEOFENCE = 0x20
-CAPABILITIES=0x17
+# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
+CAPABILITIES=0x37
 
 # Accuracy threshold for intermediate positions
 # less accurate positions are ignored, 0 for passing all positions
-ACCURACY_THRES=70
+# ACCURACY_THRES=5000
 
 ################################
 ##### AGPS server settings #####
 ################################
-
-# FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
-# SUPL_PORT=1234
-SUPL_HOST=supl.google.com
-SUPL_PORT=7275
-
-# FOR MO SUPL SUPPORT, set the following
-# MO_SUPL_HOST=supl.host.com or IP
-# MO_SUPL_PORT=1234
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
 # Bitmask of slots that are available
 # for write/install to, where 1s indicate writable,
 # and the default value is 0 where no slots
@@ -91,22 +59,12 @@ SUPL_PORT=7275
 # and the remaining 7 slots unwritable.
 # AGPS_CERT_WRITABLE_MASK=0
 
-####################################
+# FOR SUPL SUPPORT, set the following
-#  LTE Positioning Profile Settings
+#SUPL_HOST=supl.sonyericsson.com
-####################################
+#SUPL_PORT=7275
-# LPP_PROFILE is a bit mask
+SUPL_HOST=supl.google.com
-# 0: Enable RRLP on LTE(Default)
+SUPL_PORT=7276
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 3
 
-####################################
-#Datum Type
-####################################
-# 0: WGS-84
-# 1: PZ-90
-DATUM_TYPE = 0
 
 ################################
 # EXTRA SETTINGS
@@ -114,76 +72,22 @@ DATUM_TYPE = 0
 # NMEA provider (1=Modem Processor, 0=Application Processor)
 NMEA_PROVIDER=0
 
-################################
-# NMEA TAG BLOCK GROUPING
-################################
-# NMEA tag block grouping is only applicable to GSA
-# Default is disabled
-# 0 - disabled
-# 1 - enabled
-NMEA_TAG_BLOCK_GROUPING_ENABLED = 0
-
-# Customized NMEA GGA fix quality that can be used to tell
-# whether SENSOR contributed to the fix.
-#
-# When this configuration item is not enabled (set to any value that is not 1),
-# GGA fix quality conforms to NMEA standard spec as below:
-# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
-# RTK fixed fix w/ or w/o sensor: 4
-# RTK float fix w/ or w/o sensor: 5
-# SPE fix w/ or w/o sensor: 1
-# Sensor dead reckoning fix: 6
-#
-# When this configuration is enabled (set to 1), GGA fix quality
-# will be output as below:
-# PPP fix w/o sensor: 59,                  w/ sensor: 69
-# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
-# RTK fixed fix w/o sensor: 4,             w/ sensor: 64
-# RTK float fix w/o sensor: 5,             w/ sensor: 65,
-# SPE fix w/o sensor: 1,               and w/ sensor: 61
-# Sensor dead reckoning fix: 6
-#
-# any value that is not 1 - disabled
-# 1 - enabled
-CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
-
-################################
-# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
-################################
-# NMEA Reporting Rate
-# Set it to "1HZ" for 1Hz NMEA Reporting
-# Set it to "NHZ" for NHz NMEA Reporting
-#Default : NHZ (overridden by position update rate if set to lower rates)
-NMEA_REPORT_RATE=NHZ
-
 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
 SGLTE_TARGET=0
 
-##################################################
-# Select Positioning Protocol on A-GLONASS system
-##################################################
-# 0x1: RRC CPlane
-# 0x2: RRLP UPlane
-# 0x4: LLP Uplane
-A_GLONASS_POS_PROTOCOL_SELECT = 0xf
-
 ##################################################
 # Select technology for LPPe Control Plane
 ##################################################
 # 0x1: DBH for LPPe CP
 # 0x2: WLAN AP Measurements for LPPe CP
-# 0x4: SRN AP measurement for CP
+LPPE_CP_TECHNOLOGY = 0
-# 0x8: Sensor Barometer Measurement LPPe CP
-LPPE_CP_TECHNOLOGY = 0x2
 
 ##################################################
 # Select technology for LPPe User Plane
 ##################################################
 # 0x1: DBH for LPPe UP
 # 0x2: WLAN AP Measurements for LPPe UP
-# 0x4: SRN AP measurement for UP
+LPPE_UP_TECHNOLOGY = 0
-# 0x8: Sensor Barometer Measurement LPPe UP
-LPPE_UP_TECHNOLOGY = 0x2
 
 ##################################################
 # AGPS_CONFIG_INJECT
@@ -192,28 +96,22 @@ LPPE_UP_TECHNOLOGY = 0x2
 #     SUPL_VER
 #     SUPL_HOST
 #     SUPL_PORT
-#     MO_SUPL_HOST
+#     SUPL_MODE
-#     MO_SUPL_PORT
+#     SUPL_ES
 #     C2K_HOST
 #     C2K_PORT
 #     LPP_PROFILE
 #     A_GLONASS_POS_PROTOCOL_SELECT
+#     USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL
+#     GPS_LOCK
 # 0: disable
 # 1: enable
 AGPS_CONFIG_INJECT = 1
-
+SUPL_VER=0x20000
-##################################################
-# GNSS settings for automotive use cases
-# Configurations in following section are
-# specific to automotive use cases, others
-# please do not change, keep the default values
-##################################################
-
 # AP Coarse Timestamp Uncertainty
 ##################################################
 # default : 10
-# AP time stamp uncertainty, until GNSS receiver
+# or as per clock uncertainty of product
-# is able to acquire better timing information
 AP_TIMESTAMP_UNCERTAINTY = 10
 
 #####################################
@@ -221,9 +119,6 @@ AP_TIMESTAMP_UNCERTAINTY = 10
 #####################################
 # 0 : DR_SYNC pulse not available (default)
 # 1 : DR_SYNC pulse available
-# This configuration enables the driver to make use
-# of PPS events generated by DR_SYNC pulse
-# Standard Linux PPS driver needs to be enabled
 DR_SYNC_ENABLED = 0
 
 #####################################
@@ -231,159 +126,17 @@ DR_SYNC_ENABLED = 0
 #####################################
 PPS_DEVICENAME = /dev/pps0
 
-#####################################
-# Ignore PPS at Startup and after long outage
-#####################################
-IGNORE_PPS_PULSE_COUNT = 1
-
-#####################################
-# Long GNSS RF outage in seconds
-#####################################
-GNSS_OUTAGE_DURATION = 10
-
 #####################################
 #AP Clock Accuracy
 #####################################
-# Quality of APPS processor clock (in PPM).
-# Value specified is used for calculation of
-# APPS time stamp uncertainty
 AP_CLOCK_PPM = 100
 
 #####################################
 #MAX ms difference to detect missing pulse
 #####################################
-# Specifies time threshold in ms to validate any missing PPS pulses
 MISSING_PULSE_TIME_DELTA = 900
 
 #####################################
 #Propagation time uncertainty
 #####################################
-# This settings enables time uncertainty propagation
-# logic incase of missing PPS pulse
 PROPAGATION_TIME_UNCERTAINTY = 1
-
-#######################################
-#  APN / IP Type Configuration
-#  APN and IP Type to use for setting
-#  up WWAN call.
-#  Use below values for IP Type:
-#  v4 = 4
-#  v6 = 6
-#  v4v6 = 10
-#######################################
-# INTERNET_APN = abc.xyz
-# INTERNET_IP_TYPE = 4
-# SUPL_APN = abc.xyz
-# SUPL_IP_TYPE = 4
-
-#####################################
-# Modem type
-#####################################
-# This setting configures modem type
-# (external=0 or internal=1)
-# comment out the next line to vote
-# for the first modem in the list
-MODEM_TYPE = 1
-
-##################################################
-# CONSTRAINED TIME UNCERTAINTY MODE
-##################################################
-# 0 : disabled (default)
-# 1 : enabled
-# This setting enables GPS engine to keep its time
-# uncertainty below the specified constraint
-#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
-
-# If constrained time uncertainty mode is enabled,
-# this setting specifies the time uncertainty
-# threshold that gps engine need to maintain.
-# In unit of milli-seconds.
-# Default is 0.0 meaning that modem default value
-# of time uncertainty threshold will be used.
-#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
-
-# If constrained time uncertainty mode is enabled,
-# this setting specifies the power budget that
-# gps engine is allowed to spend to maintain the time
-# uncertainty.
-# Default is 0 meaning that GPS engine is not constained
-# by power budget and can spend as much power as needed.
-# In unit of 0.1 milli watt second.
-#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
-
-##################################################
-# POSITION ASSISTED CLOCK ESTIMATOR
-##################################################
-# 0 : disabled (default)
-# 1 : enabled
-# This setting enables GPS engine to estimate clock
-# bias and drift when the signal from at least 1
-# SV is available and the UE<55>s position is known by
-# other position engines.
-#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
-
-#####################################
-# proxyAppPackageName
-#####################################
-# This is a string that is sent to the framework
-# in nfwNotifyCb callback
-#PROXY_APP_PACKAGE_NAME = com.lbe.security.miui
-
-#####################################
-# CP_MTLR_ES
-#####################################
-# CP MTLR ES, 1=enable, 0=disable
-CP_MTLR_ES=0
-
-##################################################
-# GNSS_DEPLOYMENT
-##################################################
-# 0 : Enable QTI GNSS (default)
-# 1 : Enable QCSR SS5
-# 2 : Enable PDS API
-# This setting use to select between QTI GNSS,
-# QCSR SS5 hardware receiver, and PDS API.
-# By default QTI GNSS receiver is enabled.
-# GNSS_DEPLOYMENT = 0
-
-##################################################
-## LOG BUFFER CONFIGURATION
-##################################################
-#LOG_BUFFER_ENABLED, 1=enable, 0=disable
-#*_LEVEL_TIME_DEPTH, maximum time depth of level *
-#in log buffer, unit is second
-#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
-#log print sentences in log buffer
-LOG_BUFFER_ENABLED = 0
-E_LEVEL_TIME_DEPTH = 600
-E_LEVEL_MAX_CAPACITY = 50
-W_LEVEL_TIME_DEPTH = 500
-W_LEVEL_MAX_CAPACITY = 100
-I_LEVEL_TIME_DEPTH = 400
-I_LEVEL_MAX_CAPACITY = 200
-D_LEVEL_TIME_DEPTH = 30
-D_LEVEL_MAX_CAPACITY = 300
-V_LEVEL_TIME_DEPTH = 200
-V_LEVEL_MAX_CAPACITY = 400
-
-# Xiaomi add for breaking xtra download limitation
-XTRA_TEST_ENABLED = 1
-XTRA_THROTTLE_ENABLED = 0
-XTRA_SYSTEM_TIME_INJECT = 1
-# Mechanism to handle the gnss assistance data download
-# in very bad network situations
-XTRA_SOCK_KEEPALIVE=1
-##################################################
-# Allow buffer diag log packets when diag memory allocation
-# fails during boot up time.
-##################################################
-BUFFER_DIAG_LOGGING = 1
-
-#######################################
-#  NTRIP CLIENT LIBRARY NAME
-#######################################
-# NTRIP_CLIENT_LIB_NAME =
-
-##################################################
-# Correction Data Framework settings
-# Default v