CTRPF-AR-CHEAT-CODES/ActionReplayCodeTypes.txt

169 lines
6.1 KiB
Plaintext
Raw Normal View History

2018-01-04 19:59:21 +00:00
###############################
# Action Replay #
# Code Types supported by #
# CTRPluginFramework #
###############################
==============
INFO
==============
You have access to:
- 2 offset registers (not persistent)
- 2 data registers (not persistent)
- 2 storage registers (persistent)
persistent = register's value is kept between code execution
not persistent = register's value is set to default value when the code starts
Default value of offset (#1 and #2), data (#1 and #2) and storage (#1 and #2) registers is zero.
The active offset and data register is set to #1 when the code starts.
When a register index (#1 or #2) is not precised in the description, the active register is used.
==============
CODE TYPES
==============
Memory Writes:
---------------
0XXXXXXX YYYYYYYY 32bit write to [XXXXXXX + offset]
1XXXXXXX 0000YYYY 16bit write to [XXXXXXX + offset]
2XXXXXXX 000000YY 8bit write to [XXXXXXX + offset]
Conditional 32bit codes:
-------------------------
3XXXXXXX YYYYYYYY Greater Than (YYYYYYYY > [XXXXXXX + offset])
4XXXXXXX YYYYYYYY Less Than (YYYYYYYY < [XXXXXXX + offset])
5XXXXXXX YYYYYYYY Equal To (YYYYYYYY == [XXXXXXX + offset])
6XXXXXXX YYYYYYYY Not Equal To (YYYYYYYY != [XXXXXXX + offset])
Conditional 16bit codes:
-------------------------
7XXXXXXX ZZZZYYYY Greater Than (YYYY > [XXXXXXX + offset] & ~ZZZZ)
8XXXXXXX ZZZZYYYY Less Than (YYYY < [XXXXXXX + offset] & ~ZZZZ)
9XXXXXXX ZZZZYYYY Equal To (YYYY == [XXXXXXX + offset] & ~ZZZZ)
AXXXXXXX ZZZZYYYY Not Equal To (YYYY != [XXXXXXX + offset] & ~ZZZZ)
Offset Codes:
--------------
BXXXXXXX 00000000 offset = *(XXXXXXX + offset)
D3000000 XXXXXXXX offset#1 = XXXXXXXX
D3000001 XXXXXXXX - offset#2 = XXXXXXXX
2018-01-04 19:59:21 +00:00
DC000000 XXXXXXXX Adds an value to the current offset
Loop Codes:
------------
CX000000 YYYYYYYY Sets the repeat value to: YYYYYYYY (immediate value) if X == 0, data #1 if X == 1 or data #2 if X == 2
D2000000 0000000X - Full terminator (0: legacy one, 1: exit code directly)
D1000000 00000000 Loop execute
D0000000 00000000 Terminator code
Data Register Codes:
---------------------
D4000000 XXXXXXXX Adds XXXXXXXX to the data register
2018-01-11 00:57:43 +00:00
D4000001 XXXXXXXX data#1 = data#1 + data#2 + XXXXXXXX
D4000002 XXXXXXXX - data#2 = data#2 + data#1 + XXXXXXXX
D5000000 XXXXXXXX data#1 = XXXXXXXX
D5000001 XXXXXXXX - data#2 = XXXXXXXX
2018-01-04 19:59:21 +00:00
D6000000 XXXXXXXX (32bit) [XXXXXXXX+offset] = data ; offset += 4
D7000000 XXXXXXXX (16bit) [XXXXXXXX+offset] = data & 0xffff ; offset += 2
D8000000 XXXXXXXX (8bit) [XXXXXXXX+offset] = data & 0xff ; offset++
D9000000 XXXXXXXX (32bit) sets data to [XXXXXXXX+offset]
DA000000 XXXXXXXX (16bit) sets data to [XXXXXXXX+offset] & 0xFFFF
DB000000 XXXXXXXX (8bit) sets data to [XXXXXXXX+offset] & 0xFF
Patch Code:
--------------
EXXXXXXX YYYYYYYY - Copy Y bytes (Z) to [XXXXXXX + offset]
ZZZZZZZZ ZZZZZZZZ
Input Codes:
----------------
DD000000 XXXXXXXX if KEYPAD has value XXXXXXXX execute next block (see SPECIAL KEY CODE for values)
2018-01-11 00:57:43 +00:00
DE000000 AAAABBBB - if touchpos X is between AAAA >= X >= BBBB execute next block
DE000001 AAAABBBB - if touchpos Y is between AAAA >= Y >= BBBB execute next block
2018-01-04 19:59:21 +00:00
Registers operations:
-----------------------
2018-01-11 00:57:43 +00:00
DFFFFFFF 00000000 - Conditional codes: value of address is compared to YYYY (immediate value)
DFFFFFFF 00000001 - Conditional codes: value of address is compared to active data register
DFFFFFFF 00000002 - Conditional codes: active data register is compared to YYYY (immediate value)
DFFFFFFE 000000YX - Set the active data register vfp state
Y:
- 0: no conversion
- 1: convert from integer to float if X == 1, from float to integer if X == 0
X:
- 0: Disable the vfp state
- 1: Enable the vfp state
2018-01-04 19:59:21 +00:00
DF00XXXX YYYYZZZZ - Operations:
-------------------------------
DF000000 00000000 - Set offset register #1 as active (default)
DF000000 00000001 - Set offset register #2 as active
DF000001 00000000 - Set data register #1 as active (default)
DF000001 00000001 - Set data register #2 as active
DF000000 00010000 - Copy offset #1 to offset #2
DF000000 00010001 - Copy offset #2 to offset #1
DF000001 00010000 - Copy data #1 to data #2
DF000001 00010001 - Copy data #2 to data #1
DF000002 00010000 - Copy storage #1 to data #1
DF000002 00010001 - Copy storage #2 to data #2
DF000000 00020000 - Copy offset #1 to data #1
DF000000 00020001 - Copy offset #2 to data #2
DF000001 00020000 - Copy data #1 to offset #1
DF000001 00020001 - Copy data #2 to offset #2
DF000002 00020000 - Copy data #1 to storage #1
DF000002 00020001 - Copy data #2 to storage #2
Custom Codes:
---------------
2018-01-11 00:57:43 +00:00
F0000001 0000000X - Toggle float mode for F1, F2, F3 (X: 0 to disable, 1 to enable)
2018-01-04 19:59:21 +00:00
F1XXXXXX YYYYYYYY - *(XXXXXX + offset) += YYYYYYYY
F2XXXXXX YYYYYYYY - *(XXXXXX + offset) *= YYYYYYYY
F3XXXXXX YYYYYYYY - *(XXXXXX + offset) /= YYYYYYYY
F4000000 YYYYYYYY - MUL - data *= YYYYYYYY
F5000000 YYYYYYYY - DIV - data /= YYYYYYYY
F6000000 YYYYYYYY - AND - data &= YYYYYYYY
F7000000 YYYYYYYY - OR - data |= YYYYYYYY
F8000000 YYYYYYYY - XOR - data ^= YYYYYYYY
F9000000 00000000 - NOT - data = ~data
FA000000 YYYYYYYY - Left shift - data <<= YYYYYYYY
FB000000 YYYYYYYY - Right shift - data >>= YYYYYYYY
2018-01-11 00:57:43 +00:00
2018-01-04 19:59:21 +00:00
FC000000 YYYYYYYY - Copy YYYYYYYY bytes from [offset#2] to [offset#1]
2018-01-11 00:57:43 +00:00
FE00XXXX YYYYYYYY - Search pattern (Z) from offset to offset + Y, XXXX is pattern size (in bytes)
ZZZZZZZZ ZZZZZZZZ Next block of code is executed if the pattern is found and offset is updated with the address
FFXXXXXX YYYYYYYY - data = random number between XXXXXX and YYYYYYYY
2018-01-04 19:59:21 +00:00
===================
SPECIAL KEYPAD CODE
===================
0x1 A
0x2 B
0x4 Select
0x8 Start
0x10 Right
0x20 Left
0x40 Up
0x80 Down
0x100 R
0x200 L
0x400 X
0x800 Y
0x4000 ZL (N3DS Only)
0x8000 ZR (N3DS Only)
0x100000 Touchpad (any position)
0x1000000 CStick-Right (N3DS Only)
0x2000000 CStick-Left (N3DS Only)
0x4000000 CStick-Up (N3DS Only)
0x8000000 CStick-Down (N3DS Only)
0x10000000 CPad-Right
0x20000000 CPad-Left
0x40000000 CPad-Up
2018-01-11 00:57:43 +00:00
0x80000000 CPad-Down